The DOI matches its Crossref record; 59 of the 61 references it cites were found in a registry or an index.
High-strength silk protein scaffolds for bone repair
Open accessAbstract
Biomaterials for bone tissue regeneration represent a major focus of orthopedic research. However, only a handful of polymeric biomaterials are utilized today because of their failure to address critical issues like compressive strength for load-bearing bone grafts. In this study development of a high compressive strength (~13 MPa hydrated state) polymeric bone composite materials is reported, based on silk protein-protein interfacial bonding. Micron-sized silk fibers (10–600 µm) obtained utilizing alkali hydrolysis were used as reinforcement in a compact fiber composite with tunable compressive strength, surface roughness, and porosity based on the fiber length included. A combination of surface roughness, porosity, and scaffold stiffness favored human bone marrow-derived mesenchymal stem cell differentiation toward bone-like tissue in vitro based on biochemical and gene expression for bone markers. Further, minimal in vivo immunomodulatory responses suggested compatibility of the fabricated silk-fiber-reinforced composite matrices for bone engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Recently, Mandal et al., reported that SF microfiber incorporation would potentially enhance the stability of scaffolds [31].”
From Development of silk microfiber-reinforced bioink for muscle tissue engineering and in situ printing by a handheld 3D printer (2025) · cites this paper as [31]
The cited source says what the claim attributes to it.
In the citing paper
“Previous studies have highlighted the influence of fiber length on scaffold properties and cell behavior, with medium fiber lengths (150-200 μm) yielding noticeable outcomes [31].”
From Development of silk microfiber-reinforced bioink for muscle tissue engineering and in situ printing by a handheld 3D printer (2025) · cites this paper as [31]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Moreover, medium sized fiber length played an important role in enhancing the mechanical strength with higher concentration of fibers as well as cell-biomaterial interaction positively [31].”
From Development of silk microfiber-reinforced bioink for muscle tissue engineering and in situ printing by a handheld 3D printer (2025) · cites this paper as [31]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681 · cited 2×
“However, many challenges remain to satisfy an optimally functional bone regeneration scaffold system (19).”
BackgroundBiomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642 · cited 1×
“approach in engineering to enhance composite strength and has been reported for silk (14, 16, 36, 37).”
New Opportunities for an Ancient Material
Omenetto, F. G., & Kaplan, D. L. (2010) · Science · doi:10.1126/science.1188936 · Cited by 1,457 · cited 2×
“Results and Discussion Previous in vivo and in vitro studies using porous silk scaffolds have shown potential toward reconstruction of bone and bonerelated grafts due to the intrinsic high mechanical strength and robustness (17, 18, 21, 22, 26, 27).”
BackgroundSelf-citationNanoconfinement controls stiffness, strength and mechanical toughness of β-sheet crystals in silk
Keten, S., Xu, Z., Ihle, B., & Buehler, M. J. (2010) · Nature Materials · doi:10.1038/nmat2704 · Cited by 1,391 · cited 1×
“Utilizing these weaker hydrogen bonds within β-sheet nanocrystals, nanoconfinement of such smaller β-sheet nanocrystals in silk achieved higher stiffness, strength, and mechanical toughness as elucidated previously (41, 42).”
BackgroundWei, G., & Ma, P. X. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.005 · Cited by 1,271
Biodegradable polymeric scaffolds for musculoskeletal tissue engineering
Agrawal, C. M., & Ray, R. B. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<141::aid-jbm1000>3.0.co;2-j · Cited by 1,052
Chitosan–alginate hybrid scaffolds for bone tissue engineering
Li, Z., Ramay, H. R., Hauch, K. D., Xiao, D., & Zhang, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.062 · Cited by 1,044 · cited 1×
“1MPa when tested in the dry state (45).”
Background
Research works printed but not linked: 2
- 10.1002/1097-4636(200105)55:2<203::AID-JBM1007>3.0.CO;2-7 · DOI · Paper page
- 10.1002/(SICI)1097-4636(19990905)46:3<382::AID-JBM11>3.0.CO;2-R · DOI · Paper page
Cited by
Silk fibroin biomaterials for tissue regenerations
Kundu, B., Rajkhowa, R., Kundu, S. C., & Wang, X. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.043 · Cited by 1,391
“Further modifications to scaffolds include reinforcement with fine silk fibers to gain further improvement in modulus to about 13 MPa [105].”
MethodInfluential3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
The Biomedical Use of Silk: Past, Present, Future
Holland, C., Numata, K., Rnjak‐Kovacina, J., & Seib, F. P. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201800465 · Cited by 815
Silk fibroin as biomaterial for bone tissue engineering
Melke, J., Midha, S., Ghosh, S., Ito, K., & Hofmann, S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.005 · Cited by 789
“Removal of the water-soluble sericin protein coat from the cocoon yields degummed silk fibers with a similar Young’s modulus but an altered tensile strength of 450 to 700 MPa at an elongation of 12-24% [62].”
BackgroundInfluentialQi, Y., Wang, H., Wei, K., Yang, Y., Zheng, R.-Y., Kim, I., & Zhang, K.-Q. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18030237 · Cited by 547
“Due to their excellent performance, SF-based biomaterials have been found suitable for a variety of applications, including drug delivery [9], vascular tissue regeneration [10], skin wound dressing [11], and bone tissue scaffolds [12].”
Background
Metadata
- Authors
- Mandal, B. B., Grinberg, A., Seok Gil, E., Panilaitis, B., & Kaplan, D. L.
- Affiliations
- Tufts University (US)
- Department of Biomedical Engineering, Tufts University, 4 Colby Street, Medford, MA 02155;
- Corresponding author
- Kaplan, David L.
- Venue
- Proceedings of the National Academy of Sciences
- Publisher
- National Academy of Sciences
- Published
- 2012-05-02
- Volume
- 109
- Issue
- 20
- Pages
- 7699-7704
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- PMC
- PMC3356671
- OpenAlex
- W1981076043
- Cited by
- 401
- References
- 61
- Citations by year
- 2026: 17 · 2025: 18 · 2024: 22 · 2023: 17 · 2022: 25 · 2021: 29 · 2020: 34 · 2019: 33 · 2018: 36 · 2017: 49 · 2016: 38 · 2015: 26 · 2014: 35 · 2013: 16 · 2012: 6
- FWCI
- 10.76
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Proceedings of the National Academy of Sciences (publishedVersion)
- Europe PMC (PubMed Central) (publishedVersion)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institutes of Health (EB002520)
- National Institute of Biomedical Imaging and Bioengineering (EB-002520, EB 003210, R01EB003210, P41EB002520)
- National Institute of Dental and Craniofacial Research (DE017207, R01DE017207)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Keywords
- bone tissue engineering, bone regeneration, silk fibers, alkaline hydrolysis, fiber-reinforced composites, compressive strength, mesenchymal stem cells, osteogenic differentiation, porosity, surface roughness, scaffold stiffness, immunocompatibility, bone grafting
- MeSH terms
- Analysis of Variance, Animals, Biocompatible Materials, Biomechanical Phenomena, Bone Regeneration, Cell Differentiation, Female, Materials Testing, Mice, Inbred BALB C, Microscopy, Electron, Scanning, Bombyx, Compressive Strength, Tissue Engineering, Regenerative Medicine, Silk, Mice, Tissue Scaffolds, Mesenchymal Stem Cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-strength silk protein scaffolds for bone repair. https://app.cochat.ai/papers/10.1073/pnas.1119474109
- The paper
- Mandal, B. B., Grinberg, A., Seok Gil, E., Panilaitis, B., & Kaplan, D. L. (2012). High-strength silk protein scaffolds for bone repair. Proceedings of the National Academy of Sciences. https://doi.org/10.1073/pnas.1119474109
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.