The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Fe/N/C Nanotubes with Atomic Fe Sites: A Highly Active Cathode Catalyst for Alkaline Polymer Electrolyte Fuel Cells
Abstract
Fe-containing N-doped carbons (Fe/N/C) are a promising Pt-alternative catalyst for the oxygen reduction reaction (ORR) and are believed to be more stable in alkaline media than in acids and thus particularly suitable to be applied as the cathode catalyst for alkaline polymer electrolyte fuel cells (APEFCs). However, there has hitherto been no successful report on high-performance APEFC based on the Fe/N/C cathode, the reason for which is still not quite clear. Here we report a high-performance Fe/N/C catalyst and its application in APEFC. The catalyst precursor is adenosine, an environmentally benign N-rich biomolecule, which is polymerized via a solvothermal process and then carbonized through pyrolysis. The resulting Fe/N/C nanotubes are thoroughly characterized by a variety of microscopy and spectroscopy (SEM, TEM, XRD, XPS, Raman, Mössbauer, and STEM-EELS), which reveal a high surface N/C ratio (8 at%) and atomic Fe sites well dispersed at the wall of the nanotubes. The catalytic sites are identified to be Fe–N 4 . The volume-specific catalytic activity of the Fe/N/C catalyst toward the ORR is as good as that of the commercial 20 wt % Pt/C catalyst in alkaline solutions, and better in durability. The electronic conductivity of Fe/N/C turns out to be trivial in rotating-disk electrode experiments but key for fuel cell tests. The APEFC with Fe/N/C cathode (2 mg/cm 2 in catalyst loading) exhibits a peak power density greater than 450 mW/cm 2, the thus-far highest record in the literature for APEFC using a nonprecious metal cathode. Our findings not only deepen the understanding of the structure–activity relationship of the Fe/N/C catalyst but also mark a step toward its real application in APEFC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
High-Performance Electrocatalysts for Oxygen Reduction Derived from Polyaniline, Iron, and Cobalt
Wu, G., More, K. L., Johnston, C. M., & Zelenay, P. (2011) · Science · doi:10.1126/science.1200832 · Cited by 3,984
Recent advancements in Pt and Pt-free catalysts for oxygen reduction reaction
Nie, Y., Li, L., & Wei, Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00484a · Cited by 2,156
Yang, S., Feng, X., Wang, X., & Müllen, K. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100170 · Cited by 1,109
Choi, J.-Y., Yang, L., Kishimoto, T., Fu, X., Ye, S., Chen, Z., & Banham, D. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03005j · Cited by 162
Nitrogen‐Doped Carbon Nanotube Aerogels for High‐Performance ORR Catalysts
Du, R., Zhang, N., Zhu, J., Wang, Y., Xu, C., Hu, Y., Mao, N., Xu, H., Duan, W., Zhuang, L., et al. (2015) · Small · doi:10.1002/smll.201500587 · Cited by 121
Self-citation
Cited by
Carbon‐Based Metal‐Free ORR Electrocatalysts for Fuel Cells: Past, Present, and Future
Yang, L., Shui, J., Du, L., Shao, Y., Liu, J., Dai, L., & Hu, Z. (2019) · Advanced Materials · doi:10.1002/adma.201804799 · Cited by 977
Synergistic effect of well-defined dual sites boosting the oxygen reduction reaction
Wang, J., Liu, W., Luo, G., Li, Z., Zhao, C., Zhang, H., Zhu, M., Xu, Q., Wang, X., Zhao, C., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02656d · Cited by 887
Xiao, F., Wang, Y., Wu, Z., Chen, G., Yang, F., Zhu, S., Siddharth, K., Kong, Z., Lu, A., Li, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006292 · Cited by 614
Self-citationElectrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies
Yang, Y., Peltier, C. R., Zeng, R., Schimmenti, R., Li, Q., Huang, X., Yan, Z., Potsi, G., Selhorst, R., Lu, X., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00331 · Cited by 544
Self-citationDesign Principle of Fe–N–C Electrocatalysts: How to Optimize Multimodal Porous Structures?
Lee, S. H., Kim, J., Chung, D. Y., Yoo, J. M., Lee, H. S., Kim, M. J., Mun, B. S., Kwon, S. G., Sung, Y.-E., & Hyeon, T. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11129 · Cited by 541
Alkaline polymer electrolyte fuel cells stably working at 80 °C
Peng, H., Li, Q., Hu, M., Xiao, L., Lu, J., & Zhuang, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.047 · Cited by 386
Self-citationWang, Y., Yang, Y., Jia, S., Wang, X., Lyu, K., Peng, Y., Zheng, H., Wei, X., Ren, H., Xiao, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09503-4 · Cited by 338
Self-citationWang, L., Peng, X., Mustain, W. E., & Varcoe, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00331b · Cited by 301
Su, J., Ge, R., Dong, Y., Hao, F., & Chen, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04064h · Cited by 285
Huang, X., Shen, T., Zhang, T., Qiu, H., Gu, X., Ali, Z., & Hou, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201900375 · Cited by 283
Gao, Y., Cai, Z., Wu, X., Lv, Z., Wu, P., & Cai, C. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b02360 · Cited by 258
Du, L., Zhang, G., Liu, X., Hassanpour, A., Dubois, M., Tavares, A. C., & Sun, S. (2020) · Carbon Energy · doi:10.1002/cey2.73 · Cited by 120
Wang, C., Chen, W., Xia, K., Xie, N., Wang, H., & Zhang, Y. (2019) · Small · doi:10.1002/smll.201804966 · Cited by 80
Metadata
- Authors
- Ren, H., Wang, Y., Yang, Y., Tang, X., Peng, Y., Peng, H., Xiao, L., Lu, J., Abruña, H. D., & Zhuang, L.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-08-29
- Volume
- 7
- Issue
- 10
- Pages
- 6485-6492
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2749480060
- Cited by
- 164
- References
- 7
- FWCI
- 5.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.