The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Plasma-Enhanced Catalytic Synthesis of Ammonia over a Ni/Al2O3Catalyst at Near-Room Temperature: Insights into the Importance of the Catalyst Surface on the Reaction Mechanism
Open accessAbstract
A better fundamental understanding of the plasma-catalyst interaction and the reaction mechanism is vital for optimizing the design of catalysts for ammonia synthesis by plasma-catalysis. In this work, we report on a hybrid plasma-enhanced catalytic process for the synthesis of ammonia directly from N2 and H2 over transition metal catalysts (M/Al2O3, M = Fe, Ni, Cu) at near room temperature (∼35 °C) and atmospheric pressure. Reactions were conducted in a specially designed coaxial dielectric barrier discharge (DBD) plasma reactor using water as a ground electrode, which could cool and maintain the reaction at near-room temperature. The transparency of the water electrode enabled operando optical diagnostics (intensified charge-coupled device (ICCD) imaging and optical emission spectroscopy) of the full plasma discharge area to be conducted without altering the operation of the reactor, as is often needed when using coaxial reactors with opaque ground electrodes. Compared to plasma synthesis of NH3 without a catalyst, plasma-catalysis significantly enhanced the NH3 synthesis rate and energy efficiency. The effect of different transition metal catalysts on the physical properties of the discharge is negligible, which suggests that the catalytic effects provided by the chemistry of the catalyst surface are dominant over the physical effects of the catalysts in the plasma-catalytic synthesis of ammonia. The highest NH3 synthesis rate of 471 μmol g–1 h–1 was achieved using Ni/Al2O3 as a catalyst with plasma, which is 100% higher than that obtained using plasma only. The presence of a transition metal (e.g., Ni) on the surface of Al2O3 provided a more uniform plasma discharge than Al2O3 or plasma only, and enhanced the mean electron energy. The mechanism of plasma-catalytic ammonia synthesis has been investigated through operando plasma diagnostics combined with comprehensive characterization of the catalysts using N2 physisorption measurements, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), NH3-temperature-programmed desorption (TPD), and N2-TPD. Four forms of adsorbed NHx (x = 0, 1, 2, and 3) species were detected on the surfaces of the spent catalysts using XPS. It was found that metal sites and weak acid sites could enhance the production of NH3 via formation of NH2 intermediates on the surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Hagelaar, G. J. M., & Pitchford, L. C. (2005) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/14/4/011 · Cited by 3,422
Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W. I. F., & Bowen, P. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.07.001 · Cited by 2,730
Ammonia synthesis using a stable electride as an electron donor and reversible hydrogen store
Kitano, M., Inoue, Y., Yamazaki, Y., Hayashi, F., Kanbara, S., Matsuishi, S., Yokoyama, T., Kim, S.-W., Hara, M., & Hosono, H. (2012) · Nature Chemistry · doi:10.1038/nchem.1476 · Cited by 1,529
Structure of metallic catalysts
Boudart, M. (1978) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(78)90353-3 · Cited by 953
Plasma Catalysis: Synergistic Effects at the Nanoscale
Neyts, E. C., Ostrikov, K. (., Sunkara, M. K., & Bogaerts, A. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00362 · Cited by 814
Plasma Technology: An Emerging Technology for Energy Storage
Bogaerts, A., & Neyts, E. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00184 · Cited by 677
Ammonia Synthesis at Atmospheric Pressure
Marnellos, G., & Stoukides, M. (1998) · Science · doi:10.1126/science.282.5386.98 · Cited by 665
Tu, X., & Whitehead, J. C. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.06.006 · Cited by 637
Self-citationOvercoming ammonia synthesis scaling relations with plasma-enabled catalysis
Mehta, P., Barboun, P., Herrera, F. A., Kim, J., Rumbach, P., Go, D. B., Hicks, J. C., & Schneider, W. F. (2018) · Nature Catalysis · doi:10.1038/s41929-018-0045-1 · Cited by 605
A review on clean ammonia as a potential fuel for power generators
Yapicioglu, A., & Dincer, I. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.023 · Cited by 515
Catalyst Preparation with Plasmas: How Does It Work?
Wang, Z., Zhang, Y., Neyts, E. C., Cao, X., Zhang, X., Jang, B. W.-L., & Liu, C.-J. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03723 · Cited by 494
Developing more sustainable processes for ammonia synthesis
Tanabe, Y., & Nishibayashi, Y. (2013) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2013.02.010 · Cited by 456
Mei, D., Zhu, X., He, Y.-L., Yan, J. D., & Tu, X. (2014) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/24/1/015011 · Cited by 380
Self-citationWang, L., Yi, Y., Wu, C., Guo, H., & Tu, X. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707131 · Cited by 355
Self-citationCatalysis Enabled by Plasma Activation of Strong Chemical Bonds: A Review
Mehta, P., Barboun, P., Go, D. B., Hicks, J. C., & Schneider, W. F. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00263 · Cited by 346
Wang, L., Yi, Y., Guo, H., & Tu, X. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b02733 · Cited by 310
Self-citationLiu, F., Kong, W., Qi, C., Zhu, L., & Xiao, F.-S. (2012) · ACS Catalysis · doi:10.1021/cs200613p · Cited by 244
Hong, J., Prawer, S., & Murphy, A. B. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02381 · Cited by 235
Iwamoto, M., Akiyama, M., Aihara, K., & Deguchi, T. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b01624 · Cited by 212
Wind-powered ammonia fuel production for remote islands: A case study
Morgan, E., Manwell, J., & McGowan, J. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.06.034 · Cited by 203
Ammonia Synthesis by Radio Frequency Plasma Catalysis: Revealing the Underlying Mechanisms
Shah, J., Wang, W., Bogaerts, A., & Carreon, M. L. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00898 · Cited by 200
Fluid modelling of a packed bed dielectric barrier discharge plasma reactor
Van Laer, K., & Bogaerts, A. (2016) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/25/1/015002 · Cited by 191
A role for ammonia in the hydrogen economy
Avery, W. (1988) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(88)90037-7 · Cited by 160
Kinetic modelling of NH3production in N2–H2non-equilibrium atmospheric-pressure plasma catalysis
Hong, J., Pancheshnyi, S., Tam, E., Lowke, J. J., Prawer, S., & Murphy, A. B. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aa6229 · Cited by 158
Carrasco, E., Jiménez-Redondo, M., Tanarro, I., & Herrero, V. J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp22284h · Cited by 150
Nonthermal Plasma Synthesis of Ammonia over Ni-MOF-74
Shah, J. R., Wu, T., Lucero, J. M., Carreón, M. A., & Carreon, M. L. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03705 · Cited by 148
Distinguishing Plasma Contributions to Catalyst Performance in Plasma-Assisted Ammonia Synthesis
Barboun, P., Mehta, P., Herrera, F. A., Go, D. B., Schneider, W. F., & Hicks, J. C. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00406 · Cited by 147
Efficient synthesis of ammonia from N 2 and H 2 alone in a ferroelectric packed-bed DBD reactor
Gómez‐Ramírez, A., Cotrino, J., Lambert, R. M., & González-Elipe, A. R. (2015) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/24/6/065011 · Cited by 146
Akay, G., & Zhang, K. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02053 · Cited by 146
Ammonia and the Fertiliser Industry: The Development of Ammonia at Billingham
Brightling, J. (2018) · Johnson Matthey Technology Review · doi:10.1595/205651318x696341 · Cited by 141
Plasma synthesis of ammonia with a microgap dielectric barrier discharge at ambient pressure
Bai, M., Zhang, Z., Bai, X., Bai, M., & Ning, W. (2003) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2003.818761 · Cited by 139
A Review of Ammonia-Based Thermochemical Energy Storage for Concentrating Solar Power
Dunn, R. I., Lovegrove, K. M., & Burgess, G. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2166529 · Cited by 126
Hong, J., Aramesh, M., Shimoni, O., Seo, D. H., Yick, S., Greig, A. D., Charles, C., Prawer, S., & Murphy, A. B. (2016) · Plasma Chemistry and Plasma Processing · doi:10.1007/s11090-016-9711-8 · Cited by 107
Ammonia synthesis by means of plasma over MgO catalyst
Sugiyama, K., Akazawa, K., OSHIMA, M., Miura, H., Matsuda, T., & Nomura, O. (1986) · Plasma Chemistry and Plasma Processing · doi:10.1007/bf00571275 · Cited by 95
Vibrational spectra of N2: An advanced undergraduate laboratory in atomic and molecular spectroscopy
Bayram, S., & Freamat, M. (2012) · American Journal of Physics · doi:10.1119/1.4722793 · Cited by 68
Mode Transition of Filaments in Packed-Bed Dielectric Barrier Discharges
Gao, M., Zhang, Y., Wang, H., Guo, B., Zhang, Q., & Bogaerts, A. (2018) · Catalysts · doi:10.3390/catal8060248 · Cited by 33
BenYaala, M., Marot, L., Steiner, R., Moser, L., Temmerman, G. D., Poroşnicu, C., Lungu, C. P., Oberkofler, M., & Meyer, E. (2018) · Nuclear Fusion · doi:10.1088/1741-4326/aad483 · Cited by 19
Wang, C., Ma, X., Ge, Q., et al. (2015) · Catalysis Science & Technology · doi:10.1039/c4cy01494d · Cited by 16
Cited by
A Review of Non-Thermal Plasma Technology: A novel solution for CO2 conversion and utilization
George, A., Shen, B., Craven, M., Wang, Y., Kang, D., Wu, C., & Tu, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109702 · Cited by 497
Self-citationEmerging Materials and Methods toward Ammonia‐Based Energy Storage and Conversion
Chang, F., Gao, W., Guo, J., & Chen, P. (2021) · Advanced Materials · doi:10.1002/adma.202005721 · Cited by 443
A review: Synthesis, modification and photocatalytic applications of ZnIn2S4
Wang, J., Sun, S., Zhou, R., Li, Y., He, Z., Ding, H., Chen, D., & Ao, W. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.09.045 · Cited by 360
Plasma-driven catalysis: green ammonia synthesis with intermittent electricity
Rouwenhorst, K. H. R., Engelmann, Y., van ‘t Veer, K., Postma, R. S., Bogaerts, A., & Lefferts, L. (2020) · Green Chemistry · doi:10.1039/d0gc02058c · Cited by 331
N2 Fixation by Plasma-Activated Processes
Winter, L. R., & Chen, J. G. (2021) · Joule · doi:10.1016/j.joule.2020.11.009 · Cited by 327
Metadata
- Authors
- Wang, Y., Craven, M., Yu, X., Ding, J., Bryant, P., Huang, J., & Tu, X.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-10-18
- Volume
- 9
- Issue
- 12
- Pages
- 10780-10793
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2980739205
- Cited by
- 402
- References
- 39
- FWCI
- 6.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.