Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells
The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Abstract
Interfacial trap-assisted non-radiative recombination and residual stress impede the further increase of power conversion efficiency (PCE) and stability of the methylammonium-free (MA-free) perovskite solar cells (PSCs). Here, we report an interfacial defect passivation and stress release strategy through employing the multi-active-site Lewis base ligand (i.e., (5-mercapto-1,3,4-thiadiazol-2-ylthio)acetic acid (MTDAA)) to modify the surface and grain boundaries (GBs) of MA-free perovskite films. Both experimental and theoretical results confirm strong chemical interactions between multiple active sites in the MTDAA molecule and undercoordinated Pb 2+ at the surface or GBs of perovskite films. It is demonstrated theoretically that multi-active-site adsorption is more favorable thermodynamically as compared to single-active-site adsorption, regardless of PbI 2 termination and formamidinium iodide (FAI) termination types. MTDAA modification results in much reduced defect density, increased carrier lifetime, and almost thoroughly released interfacial residual stress. Upon MTDAA passivation, the PCE is boosted from 20.26% to 21.92%. The unencapsulated device modified by MTDAA maintains 99% of its initial PCE after aging under the relative humidity range of 10–20% for 1776 h, and 91% after aging at 60 °C for 1032 h.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Jeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Kim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells
Ni, Z., Bao, C., Liu, Y., Jiang, Q., Wu, W.-Q., Chen, S., Dai, X., Chen, B., Hartweg, B., Yu, Z., et al. (2020) · Science · doi:10.1126/science.aba0893 · Cited by 1,302
Yi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Lewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
Lee, J.-W., Kim, H.-S., & Park, N.-G. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00440 · Cited by 1,067
Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Turren-Cruz, S.-H., Hagfeldt, A., & Saliba, M. (2018) · Science · doi:10.1126/science.aat3583 · Cited by 1,055
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Wang, Q., Chen, B., Liu, Y., Deng, Y., Bai, Y., Dong, Q., & Huang, J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02941h · Cited by 886
Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
Abate, A., Saliba, M., Hollman, D. J., Stranks, S. D., Wojciechowski, K., Avolio, R., Grancini, G., Petrozza, A., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl500627x · Cited by 774
Juarez-Perez, E. J., Hawash, Z., Raga, S. R., Ono, L. K., & Qi, Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02016j · Cited by 761
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Self-citationLiu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Regulating strain in perovskite thin films through charge-transport layers
Xue, D.-J., Hou, Y., Liu, S.-C., Wei, M., Chen, B., Huang, Z., Li, Z., Sun, B., Proppe, A. H., Dong, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15338-1 · Cited by 678
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Wang, F., Geng, W., Zhou, Y., Fang, H., Tong, C., Loi, M. A., Liu, L., & Zhao, N. (2016) · Advanced Materials · doi:10.1002/adma.201603062 · Cited by 624
Trapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
The Role of Chlorine in the Formation Process of “CH3NH3PbI3‐xClx” Perovskite
Yu, H., Wang, F., Xie, F., Li, W., Chen, J., & Zhao, N. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401872 · Cited by 572
Self-citationReducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Chen, J., Zhao, X., Kim, S., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201902902 · Cited by 527
Self-citationMaterials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Self-citationInterfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
Wang, H., Zhu, C., Liu, L., Ma, S., Liu, P., Wu, J., Shi, C., Du, Q., Hao, Y., Xiang, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904408 · Cited by 499
Lee, J.-W., Dai, Z., Lee, C., Lee, H. M., Han, T.-H., De Marco, N., Lin, O., Choi, C. S., Dunn, B., Koh, J., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b01037 · Cited by 492
Bifunctional Surface Engineering on SnO2 Reduces Energy Loss in Perovskite Solar Cells
Jung, E. H., Chen, B., Bertens, K., Vafaie, M., Teale, S., Proppe, A., Hou, Y., Zhu, T., Zheng, C., & Sargent, E. H. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01566 · Cited by 389
Ahsan, M. A., Puente Santiago, A. R., Hong, Y., Zhang, N., Cano, M., Rodriguez-Castellon, E., Echegoyen, L., Sreenivasan, S. T., & Noveron, J. C. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c06960 · Cited by 373
Kim, M., Motti, S. G., Sorrentino, R., & Petrozza, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01101j · Cited by 344
You, S., Zeng, H., Ku, Z., Wang, X., Wang, Z., Rong, Y., Zhao, Y., Zheng, X., Luo, L., Li, L., et al. (2020) · Advanced Materials · doi:10.1002/adma.202003990 · Cited by 329
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Self-citationQin, P., Yang, G., Ren, Z., Cheung, S. H., So, S. K., Chen, L., Hao, J., Hou, J., & Li, G. (2018) · Advanced Materials · doi:10.1002/adma.201706126 · Cited by 293
Zheng, X., Troughton, J., Gasparini, N., Lin, Y., Wei, M., Hou, Y., Liu, J., Song, K., Chen, Z., Yang, C., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.005 · Cited by 270
Self-citationChen, J., Kim, S., & Park, N. (2018) · Advanced Materials · doi:10.1002/adma.201801948 · Cited by 254
Self-citationZhou, Q., Duan, J., Yang, X., Duan, Y., & Tang, Q. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202010252 · Cited by 252
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
You, S., Wang, H., Bi, S., Zhou, J., Qin, L., Qiu, X., Zhao, Z., Xu, Y., Zhang, Y., Shi, X., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706924 · Cited by 242
Chen, Y., Tan, S., Li, N., Huang, B., Niu, X., Li, L., Sun, M., Zhang, Y., Zhang, X., Zhu, C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.07.006 · Cited by 242
Yao, Q., Xue, Q., Li, Z., Zhang, K., Zhang, T., Li, N., Yang, S., Brabec, C. J., Yip, H., & Cao, Y. (2020) · Advanced Materials · doi:10.1002/adma.202000571 · Cited by 227
Yang, N., Zhu, C., Chen, Y., Zai, H., Wang, C., Wang, X., Wang, H., Ma, S., Gao, Z., Wang, X., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01736a · Cited by 219
Zhou, Y., Jia, Y., Fang, H., Loi, M. A., Xie, F., Gong, L., Qin, M., Lu, X., Wong, C., & Zhao, N. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803130 · Cited by 195
Zhang, Y., Seo, S., Lim, S. Y., Kim, Y., Kim, S.-G., Lee, D.-K., Lee, S.-H., Shin, H., Cheong, H., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02348 · Cited by 193
Research Update: Strategies for improving the stability of perovskite solar cells
Habisreutinger, S. N., McMeekin, D. P., Snaith, H. J., & Nicholas, R. J. (2016) · APL Materials · doi:10.1063/1.4961210 · Cited by 157
Stolterfoht, M., Corre, V. M. L., Feuerstein, M., Caprioglio, P., Koster, L. J. A., & Neher, D. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02262 · Cited by 150
Tavakoli, M. M., Bi, D., Pan, L., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800275 · Cited by 132
Wen, T. Y., Yang, S., Liu, P. F., Tang, L. J., Qiao, H. W., Chen, X., Yang, H. G., Hou, Y., & Yang, H. G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703143 · Cited by 111
Starr, D. E., Sadoughi, G., Handick, E., Wilks, R. G., Alsmeier, J. H., Köhler, L., Gorgoi, M., Snaith, H. J., & Bär, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00403a · Cited by 105
Xie, L., Lin, K., Lu, J., Feng, W., Song, P., Yan, C., Liu, K., Shen, L., Tian, C., & Wei, Z. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b11546 · Cited by 101
Rashid, M., Husain, A., Mishra, R., Karim, S., Khan, S., Ahmad, M., Al-wabel, N., Husain, A., Ahmad, A., & Khan, S. A. (2015) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.08.019 · Cited by 78
Euvrard, J., Gunawan, O., & Mitzi, D. B. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902706 · Cited by 72
Efficient and Stable All‐Inorganic Perovskite Solar Cells
Chen, J., & Choy, W. C. H. (2020) · Solar RRL · doi:10.1002/solr.202000408 · Cited by 64
Self-citationLi, S., Fan, K., Cui, Y., Leng, S., Ying, Y., Zou, W., Liu, Z., Li, C., Yao, K., & Huang, H. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00871 · Cited by 51
Ren, Y., Yan, Y., Wang, Y., Zhang, H., & Li, X. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127839 · Cited by 26
Cited by
Li, H., Zhang, C., Gong, C., Zhang, D., Zhang, H., Zhuang, Q., Yu, X., Gong, S., Chen, X., Yang, J., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01295-8 · Cited by 404
Self-citationLessons learned: how to report XPS data incorrectly about lead-halide perovskites
Li, C., Zhang, N., & Gao, P. (2023) · Materials Chemistry Frontiers · doi:10.1039/d3qm00574g · Cited by 295
Liu, W., Lu, Y., Wei, D., Huo, X., Huang, X., Li, Y., Meng, J., Zhao, S., Qiao, B., Liang, Z., et al. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta04788h · Cited by 52
Metadata
- Authors
- Liu, B., Bi, H., He, D., Bai, L., Wang, W., Yuan, H., Song, Q., Su, P., Zang, Z., Zhou, T., & Chen, J.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-06-18
- Volume
- 6
- Issue
- 7
- Pages
- 2526-2538
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W3175342719
- Cited by
- 276
- References
- 69
- FWCI
- 14.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.