Toughening Glassy Poly(lactide) with Block Copolymer Micelles
Open accessThe DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
Abstract Poly(lactide) (PLA), a compostable bioderived polyester, can be produced at a cost and scale that makes it an attractive replacement for nondegradable petroleum-derived thermoplastics. However, pristine PLA is brittle and unsuitable for use in applications where high impact strength and ductility are required. In this work we demonstrate that poly(l-lactide) (PLLA) in the glassy state can be toughened significantly via addition of an amphiphilic diblock polymer. Notably, a PLLA blend containing only 5 wt% poly(ethylene oxide)-b-poly(butylene oxide) (PEO–PBO) exhibited tensile toughness and notched Izod impact strength over an order of magnitude higher than neat amorphous PLLA without a significant reduction in transparency or elastic modulus. For a series of PLLA blends containing PEO–PBO of fixed composition (∼70% volume fraction PBO), the toughness was inversely related to the molar mass of the added modifier with the highest toughness observed for the blend containing the smallest diblock (∼7 kg/mol). Interestingly, at fixed composition and molar mass poly(l-lactide)-b-poly(butylene oxide) (PLLA–PBO) exhibited a substantial but reduced toughening efficiency compared to PEO–PBO. We attribute this difference to a change in the solubility parameter of the amphiphilc block. Using TEM, we show that the greatest toughening is observed when the diblock modifier forms small cylindrical micelles that are well dispersed in the PLLA matrix. This morphology is facilitated by a negative Flory–Huggins interaction parameter (χ) between PEO and PLLA. These insights suggest a new and versatile strategy for the facile and efficient toughening of brittle thermoplastics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Self-citationAnderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity
Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Scalable production of mechanically tunable block polymers from sugar
Xiong, M., Schneiderman, D. K., Bates, F. S., Hillmyer, M. A., & Zhang, K. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1404596111 · Cited by 203
Self-citation(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Research works printed but not linked: 44
- Miller, 2013, ACS Macro Lett., 2, 550, 10.1021/mz400207g · DOI · Paper page
- Perego, 1996, J. Appl. Polym. Sci., 59, 37, 10.1002/(SICI)1097-4628(19960103)59:1<37::AID-APP6>3.0.CO;2-N · doi:10.1002/(sici)1097-4628(19960103)59:1<37::aid-app6>3.0.co;2-n
- Murariu, 2008, Polym. Adv. Technol., 19, 636, 10.1002/pat.1131 · DOI · Paper page
- Ljungberg, 2002, J. Appl. Polym. Sci., 86, 1227, 10.1002/app.11077 · DOI · Paper page
- Martino, 2006, J. Therm. Anal. Calorim., 86, 707, 10.1007/s10973-006-7897-3 · DOI
- Hiljanen-Vainio, 1996, J. Appl. Polym. Sci., 59, 1281, 10.1002/(SICI)1097-4628(19960222)59:8<1281::AID-APP11>3.3.CO;2-E · doi:10.1002/(sici)1097-4628(19960222)59:8<1281::aid-app11>3.3.co;2-e
- Jing, 2008, J. Am. Chem. Soc., 130, 13826, 10.1021/ja804357u · DOI · Paper page
- Theryo, 2010, Macromolecules, 43, 7394, 10.1021/ma101155p · DOI · Paper page
- Vilay, 2009, J. Appl. Polym. Sci., 114, 1784, 10.1002/app.30683 · DOI
- Anderson, 2003, J. Appl. Polym. Sci., 89, 3757, 10.1002/app.12462 · DOI · Paper page
- Liu, 2010, Macromolecules, 43, 6058, 10.1021/ma101108g · DOI · Paper page
- Liu, 2011, Macromolecules, 44, 1513, 10.1021/ma1026934 · DOI · Paper page
- Urayama, 2003, Macromol. Mater. Eng., 288, 562, 10.1002/mame.200350004 · DOI
- Chen, 2005, J. Polym. Sci., Part B: Polym. Phys., 43, 478, 10.1002/polb.20345 · DOI
- Hasook, 2006, Polym. Eng. Sci., 46, 1001, 10.1002/pen.20579 · DOI · Paper page
- Grijpma, 2002, Polym. Int., 51, 845, 10.1002/pi.988 · DOI
- Labrecque, 1997, J. Appl. Polym. Sci., 66, 1507, 10.1002/(SICI)1097-4628(19971121)66:8<1507::AID-APP11>3.0.CO;2-0 · DOI · Paper page
- Panthani, 2015, Macromolecules, 48, 4529, 10.1021/acs.macromol.5b01029 · DOI
- Semba, 2006, J. Appl. Polym. Sci., 101, 1816, 10.1002/app.23589 · DOI · Paper page
- Harada, 2007, J. Appl. Polym. Sci., 106, 1813, 10.1002/app.26717 · DOI · Paper page
- Li, 2007, Macromol. Biosci., 7, 921, 10.1002/mabi.200700027 · DOI · Paper page
- Robertson, 2010, Macromolecules, 43, 1807, 10.1021/ma9022795 · DOI
- Anderson, 2004, Polymer, 45, 8809, 10.1016/j.polymer.2004.10.047 · DOI · Paper page
- Li, 2009, Eur. Polym. J., 45, 738, 10.1016/j.eurpolymj.2008.12.010 · DOI · Paper page
- Knoll, 1998, Styrolux+ and styroflex+-from transparent high impact polystyrene to new thermoplastic elastomers: Syntheses, applications and blends with other styrene based polymers, 231
- Adhikari, 2004, Prog. Polym. Sci., 29, 949, 10.1016/j.progpolymsci.2004.06.002 · DOI
- Leibler, 2005, Prog. Polym. Sci., 30, 898, 10.1016/j.progpolymsci.2005.06.007 · DOI
- Li, 2016, J. Polym. Sci., Part B: Polym. Phys., 54, 189, 10.1002/polb.23894 · DOI
- Borukhov, 2002, Macromolecules, 35, 5171, 10.1021/ma011351g · DOI · Paper page
- Borukhov, 2000, Phys. Rev. E: Stat. Phys., Plasmas, Fluids, Relat. Interdiscip. Top., 62, R41, 10.1103/PhysRevE.62.R41 · DOI
- Tsuji, 2000, J. Appl. Polym. Sci., 75, 629, 10.1002/(SICI)1097-4628(20000131)75:5<629::AID-APP5>3.0.CO;2-A · DOI
- Lin, 2006, Polymer, 47, 6826, 10.1016/j.polymer.2006.07.039 · doi:10.1016/j.polymer.2006.07.039
- Nijenhuis, 1996, Polymer, 37, 5849, 10.1016/S0032-3861(96)00455-7 · DOI · Paper page
- Lai, 2004, Polymer, 45, 3073, 10.1016/j.polymer.2004.03.003 · DOI · Paper page
- Yang, 2012, Macromolecules, 45, 4254, 10.1021/ma202505f · DOI · Paper page
- Kowalczyk, 2012, J. Appl. Polym. Sci., 124, 4579, 10.1002/app.35489 · DOI
- Bartczak, 2014, Mechanical Properties of Polymer Blends, 1203, 10.1007/978-94-007-6064-6_13 · DOI
- Declet-Perez, 2013, ACS Macro Lett., 2, 939, 10.1021/mz4004419 · DOI
- Redline, 2014, Polymer, 55, 4172, 10.1016/j.polymer.2014.06.016 · doi:10.1016/j.polymer.2014.06.016
- Heckmann, 2005, Structure–property relationships in rubber modified amorphous thermoplastic polymers, 429
- Li, 2014, Prog. Org. Coat., 77, 1145, 10.1016/j.porgcoat.2014.03.015 · doi:10.1016/j.porgcoat.2014.03.015
- Hentze, 2002, Rev. Mol. Biotechnol., 90, 27, 10.1016/S1389-0352(01)00046-0 · DOI
- Cooper, 2003, Adv. Mater., 15, 1049, 10.1002/adma.200300380 · DOI · Paper page
- Su, 2011, Appl. Phys. A: Mater. Sci. Process., 104, 269, 10.1007/s00339-010-6122-1 · DOI
Cited by
50th Anniversary Perspective: Block Polymers—Pure Potential
Bates, C. M., & Bates, F. S. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02355 · Cited by 788
Self-citationUltra-stretchable hydrogels with reactive liquid metals as asymmetric force-sensors
Peng, H., Xin, Y., Xu, J., Liu, H., & Zhang, J. (2019) · Materials Horizons · doi:10.1039/c8mh01561a · Cited by 261
Self-citationHaider, M. S., Lübtow, M. M., Endres, S., Forster, S., Flegler, V. J., Böttcher, B., Aseyev, V., Pöppler, A.-C., & Luxenhofer, R. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b22495 · Cited by 100
Xiang, S., Feng, L., Bian, X., Zhang, B., Sun, B., Liu, Y., Li, G., & Chen, X. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4530 · Cited by 42
Gong, L., Hu, Z., Chen, Y., Zhang, J., Cao, W., Liu, X., Chen, W., & Bao, J. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250032 · Cited by 2
Self-citation
Metadata
- Authors
- Li, T., Zhang, J., Schneiderman, D. K., Francis, L. F., & Bates, F. S.
- Venue
- ACS Macro Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-06
- Volume
- 5
- Issue
- 3
- Pages
- 359-364
- ISSN
- 2161-1653 (ISSN-L)
- OpenAlex
- W2288909525
- Cited by
- 105
- References
- 15
- FWCI
- 5.64
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Funders
- National Science Foundation (CHE-1413862, DMR-1420013)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Toughening Glassy Poly(lactide) with Block Copolymer Micelles. https://app.cochat.ai/papers/10.1021/acsmacrolett.6b00063
- The paper
- Li, T., Zhang, J., Schneiderman, D. K., Francis, L. F., & Bates, F. S. (2016). Toughening Glassy Poly(lactide) with Block Copolymer Micelles. ACS Macro Letters. https://doi.org/10.1021/acsmacrolett.6b00063
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.