The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Top-Down Approach Making Anisotropic Cellulose Aerogels as Universal Substrates for Multifunctionalization
Open accessAbstract
Abstract Highly porous, strong aerogels with anisotropic structural properties are of great interest for multifunctional materials for applications including insulators in buildings, filters for oil cleanup, electrical storage devices, etc. Contemporary aerogels are mostly extracted from fossil resources and synthesized from bottom-up techniques, often requiring additional strategies to obtain high anisotropy. In this work, a universal approach to prepare porous, strong, anisotropic aerogels is presented through exploiting the natural hierarchical and anisotropic structure of wood. The preparation comprises nanoscale removal of lignin, followed by dissolution–regeneration of nanofibers, leading to enhanced cell wall porosity with nanofibrillated networks occupying the pore space in the cellular wood structure. The aerogels retain structural anisotropy of natural wood, exhibit specific surface areas up to 247 m2/g, and show high compression strength at 95% porosity. This is a record specific area value for wood aerogels/foams and even higher than most cellulose-based aerogels for its assigned strength. The aerogel can serve as a platform for multifunctional composites including scaffolds for catalysis, gas separation, or liquid purification due to its porous matrix or as binder-free electrodes in electronics. To demonstrate the multifunctionality, the aerogels are successfully decorated with metal nanoparticles (Ag) and metal oxide nanoparticles (TiO2) by in situ synthesis, coated by the conductive polymer (PEDOT:PSS), and carbonized to yield conductive aerogels. This approach is found to be a universal way to prepare highly porous anisotropic aerogels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Park, S., Baker, J. O., Himmel, M. E., Parilla, P. A., & Johnson, D. K. (2010) · Biotechnology for Biofuels · doi:10.1186/1754-6834-3-10 · Cited by 3,395
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Review of Hydrogels and Aerogels Containing Nanocellulose
De France, K. J., Hoare, T., & Cranston, E. D. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00531 · Cited by 1,344
A High‐Performance Self‐Regenerating Solar Evaporator for Continuous Water Desalination
Kuang, Y., Chen, C., He, S., Hitz, E. M., Wang, Y., Gan, W., Mi, R., & Hu, L. (2019) · Advanced Materials · doi:10.1002/adma.201900498 · Cited by 1,005
Plasmonic Wood for High‐Efficiency Solar Steam Generation
Zhu, M., Li, Y., Chen, F., Zhu, X., Dai, J., Li, Y., Yang, Z., Yan, X., Song, J., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701028 · Cited by 937
Self-citationPolysaccharide-based aerogels—Promising biodegradable carriers for drug delivery systems
García-González, C. A., Alnaief, M., & Smirnova, I. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.066 · Cited by 725
Solution studies of cellulose in lithium chloride and N,N-dimethylacetamide
McCormick, C. L., Callais, P. A., & Hutchinson, B. H. (1985) · Macromolecules · doi:10.1021/ma00154a010 · Cited by 672
Guan, H., Cheng, Z., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b05763 · Cited by 666
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Self-citationAdvanced carbon aerogels for energy applications
Biener, J., Stadermann, M., Suss, M., Worsley, M. A., Biener, M. M., Rose, K. A., & Baumann, T. F. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00627k · Cited by 651
Sacui, I. A., Nieuwendaal, R. C., Burnett, D. J., Stranick, S. J., Jorfi, M., Weder, C., Foster, E. J., Olsson, R. T., & Gilman, J. W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500359f · Cited by 647
High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC)
Sehaqui, H., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.003 · Cited by 568
Self-citationHighly Compressible, Anisotropic Aerogel with Aligned Cellulose Nanofibers
Song, J., Chen, C., Yang, Z., Kuang, Y., Li, T., Li, Y., Huang, H., Kierzewski, I., Liu, B., He, S., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b04246 · Cited by 536
Self-citationSehaqui, H., Salajková, M., Zhou, Q., & Berglund, L. A. (2010) · Soft Matter · doi:10.1039/b927505c · Cited by 462
Self-citationNiederberger, M., Bartl, M. H., & Stucky, G. D. (2002) · Chemistry of Materials · doi:10.1021/cm021203k · Cited by 419
Nanofibrillar cellulose aerogels
Jin, H., Nishiyama, Y., Wada, M., & Kuga, S. (2004) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.03.007 · Cited by 350
Svagan, A. J., Samir, M. A. S. A., & Berglund, L. A. (2008) · Advanced Materials · doi:10.1002/adma.200701215 · Cited by 347
Self-citationSelf-assembly and applications of anisotropic nanomaterials: A review
Thorkelsson, K., Bai, P., & Xu, T. (2015) · Nano Today · doi:10.1016/j.nantod.2014.12.005 · Cited by 344
THE LITHIUM CHLORIDE/DIMETHYLACETAMIDE SOLVENT FOR CELLULOSE: A LITERATURE REVIEW
Dawsey, T. R., & McCormick, C. L. (1990) · Journal of Macromolecular Science, Part C · doi:10.1080/07366579008050914 · Cited by 333
Polysaccharide-based aerogels as drug carriers
Mehling, T., Smirnova, I., Guenther, U., & Neubert, R. H. H. (2009) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2009.08.038 · Cited by 303
Hoppe, C. E., Lazzari, M., Pardiñas-Blanco, I., & López-Quintela, M. A. (2006) · Langmuir · doi:10.1021/la060885d · Cited by 299
Zhang, C., Liu, R., Xiang, J., Kang, H., Liu, Z., & Huang, Y. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp506013c · Cited by 299
Nanocellulose-derived highly porous carbon aerogels for supercapacitors
Zu, G., Shen, J., Zou, L., Wang, F., Wang, X., Zhang, Y., & Yao, X. (2016) · Carbon · doi:10.1016/j.carbon.2015.11.079 · Cited by 284
Frey, M., Widner, D., Segmehl, J. S., Casdorff, K., Keplinger, T., & Burgert, I. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18646 · Cited by 271
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13629a · Cited by 268
Review on the Production of Polysaccharide Aerogel Particles
Ganesan, K., Budtova, T., Ratke, L., Gurikov, P., Baudron, V., Preibisch, I., Niemeyer, P., Smirnova, I., & Milow, B. (2018) · Materials · doi:10.3390/ma11112144 · Cited by 254
Liebner, F., Haimer, E., Wendland, M., Neouze, M., Schlufter, K., Miethe, P., Heinze, T., Potthast, A., & Rosenau, T. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.200900371 · Cited by 200
Xiao, S., Gao, R., Lu, Y., Li, J., & Sun, Q. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.11.041 · Cited by 195
Jiang, F., & Hsieh, Y.-L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13577 · Cited by 195
Composition and structure of balsa (Ochroma pyramidale) wood
Borrega, M., Ahvenainen, P., Serimaa, R., & Gibson, L. (2015) · Wood Science and Technology · doi:10.1007/s00226-015-0700-5 · Cited by 189
Munier, P., Gordeyeva, K., Bergström, L., & Fall, A. B. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00304 · Cited by 186
Donius, A. E., Liu, A., Berglund, L. A., & Wegst, U. G. K. (2014) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.05.012 · Cited by 162
Self-citationZhang, X., Wang, H., Cai, Z., Yan, N., Liu, M., & Yu, Y. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03554 · Cited by 155
Seantier, B., Bendahou, D., Bendahou, A., Grohens, Y., & Kaddami, H. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.11.032 · Cited by 144
Bio-inspired functional wood-based materials – hybrids and replicates
Burgert, I., Cabane, É., Zollfrank, C., & Berglund, L. A. (2015) · International Materials Reviews · doi:10.1179/1743280415y.0000000009 · Cited by 128
Self-citationMechanically strong fully biobased anisotropic cellulose aerogels
Chen, B., Zheng, Q., Zhu, J., Li, J., Cai, Z., Chen, L., & Gong, S. (2016) · RSC Advances · doi:10.1039/c6ra19280g · Cited by 123
Impact of selected solvent systems on the pore and solid structure of cellulose aerogels
Pircher, N., Carbajal, L., Schimper, C. B., Bacher, M., Rennhofer, H., Nédélec, J., Lichtenegger, H. C., Rosenau, T., & Liebner, F. W. (2016) · Cellulose · doi:10.1007/s10570-016-0896-z · Cited by 111
Liu, A., Medina, L., & Berglund, L. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15561 · Cited by 109
Self-citationSai, H., Li, X., Xiang, J., Cui, L., Jiao, J., Zhao, C., Li, Z., Li, F., & Zhang, T. (2014) · RSC Advances · doi:10.1039/c4ra02752c · Cited by 106
Cellulose Nanocomposite Biopolymer Foam—Hierarchical Structure Effects on Energy Absorption
Svagan, A. J., Berglund, L. A., & Jensen, P. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200183u · Cited by 85
Self-citationAbe, K., & Yamamoto, H. (2005) · Journal of Wood Science · doi:10.1007/s10086-004-0667-6 · Cited by 84
Cellulose aerogels prepared from an aqueous zinc chloride salt hydrate melt
Schestakow, M., Karadagli, I., & Ratke, L. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.10.097 · Cited by 80
Phase transformations in microcrystalline cellulose due to partial dissolution
Duchemin, B., Newman, R. H., & Staiger, M. P. (2007) · Cellulose · doi:10.1007/s10570-007-9121-4 · Cited by 78
Zhang, X., Wang, Y., Zhao, J., Xiao, M., Zhang, W., & Lu, C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00814 · Cited by 78
Kriechbaum, K., Munier, P., Apostolopoulou‐Kalkavoura, V., et al. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02278 · Cited by 50
Matsuyama, K., Morotomi, K., Inoue, S., Nakashima, M., Nakashima, H., Okuyama, T., Kato, T., Muto, H., & Sugiyama, H. (2018) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2018.08.008 · Cited by 49
Zhang, R., Chen, Q., Zhen, Z., Jiang, X., Zhong, M., & Zhu, H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04808 · Cited by 43
The structure of cellular solids
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326.004 · Cited by 40
Dal’Acqua, N., de Mattos, A. B., Krindges, I., Pereira, M. B., Barud, H. D. S., Ribeiro, S. J. L., Duarte, G. C. S., Radtke, C., Almeida, L. C., Giovanela, M., et al. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp509359b · Cited by 22
Cited by
Emerging Engineered Wood for Building Applications
Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00450 · Cited by 326
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
Metadata
- Authors
- Garemark, J., Yang, X., Sheng, X., Cheung, O., Sun, L., Berglund, L. A., & Li, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-05-15
- Volume
- 14
- Issue
- 6
- Pages
- 7111-7120
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3024977590
- Cited by
- 256
- References
- 53
- FWCI
- 7.76
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.