The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Abstract
Moisture, in the form of ambient humidity, has a significant impact on methylammonium lead halide perovskite films. In particular, due to the hygroscopic nature of the methylammonium component, moisture plays a significant role during film formation. This issue has so far not been well understood and neither has the impact of moisture on the physical properties of resultant films. Herein, we carry out a comprehensive and well-controlled study of the effect of moisture exposure on methylammonium lead halide perovskite film formation and properties. We find that films formed in higher humidity atmospheres have a less continuous morphology but significantly improved photoluminescence, and that film formation is faster. In photovoltaic devices, we find that exposure to moisture, either in the precursor solution or in the atmosphere during formation, results in significantly improved open-circuit voltages and hence overall device performance. We then find that by post-treating dry films with moisture exposure, we can enhance photovoltaic performance and photoluminescence in a similar way. The enhanced photoluminescence and open-circuit voltage imply that the material quality is improved in films that have been exposed to moisture. We determine that this improvement stems from a reduction in trap density in the films, which we postulate to be due to the partial solvation of the methylammonium component and "self-healing" of the perovskite lattice. This work highlights the importance of controlled moisture exposure when fabricating high-performance perovskite devices and provides guidelines for the optimum environment for fabrication. Moreover, we note that often an unintentional water exposure is likely responsible for the high performance of solar cells produced in some laboratories, whereas careful synthesis and fabrication in a dry environment will lead to lower-performing devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Self-citationAn improved experimental determination of external photoluminescence quantum efficiency
de Mello, J. C., Wittmann, H. F., & Friend, R. H. (1997) · Advanced Materials · doi:10.1002/adma.19970090308 · Cited by 2,056
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Self-citationDeschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Self-citationNoel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Self-citationXiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells
Leguy, A. M. A., Hu, Y., Campoy-Quiles, M., Alonso, M. I., Weber, O. J., Azarhoosh, P., van Schilfgaarde, M., Weller, M. T., Bein, T., Nelson, J., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00660 · Cited by 1,366
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Rau, U. (2007) · Physical Review B · doi:10.1103/physrevb.76.085303 · Cited by 1,231
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Self-citationRecombination Kinetics in Organic-Inorganic Perovskites: Excitons, Free Charge, and Subgap States
Stranks, S. D., Burlakov, V. M., Leijtens, T., Ball, J. M., Goriely, A., & Snaith, H. J. (2014) · Physical Review Applied · doi:10.1103/physrevapplied.2.034007 · Cited by 1,189
Self-citationDualeh, A., Tétreault, N., Moehl, T., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304022 · Cited by 967
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
Self-citationWu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
Abate, A., Saliba, M., Hollman, D. J., Stranks, S. D., Wojciechowski, K., Avolio, R., Grancini, G., Petrozza, A., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl500627x · Cited by 774
Self-citationAbate, A., Leijtens, T., Pathak, S., Teuscher, J., Avolio, R., Errico, M. E., Kirkpatrik, J., Ball, J. M., Docampo, P., McPherson, I., et al. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44397j · Cited by 674
Self-citationTuning the Light Emission Properties by Band Gap Engineering in Hybrid Lead Halide Perovskite
D’Innocenzo, V., Srimath Kandada, A. R., De Bastiani, M., Gandini, M., & Petrozza, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja511198f · Cited by 623
Self-citationNguyen, W. H., Bailie, C. D., Unger, E. L., & McGehee, M. D. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504539w · Cited by 611
Neutral Color Semitransparent Microstructured Perovskite Solar Cells
Eperon, G. E., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn4052309 · Cited by 470
Self-citationRecombination Study of Combined Halides (Cl, Br, I) Perovskite Solar Cells
Suarez, B., Gonzalez-Pedro, V., Ripolles, T. S., Sanchez, R. S., Otero, L., & Mora-Sero, I. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006797 · Cited by 428
Role of Chloride in the Morphological Evolution of Organo-Lead Halide Perovskite Thin Films
Williams, S. T., Zuo, F., Chueh, C.-C., Liao, C.-Y., Liang, P.-W., & Jen, A. K.-Y. (2014) · ACS Nano · doi:10.1021/nn5041922 · Cited by 385
Ko, H.-S., Lee, J.-W., & Park, N.-G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00658a · Cited by 334
Radiative efficiency of lead iodide based perovskite solar cells
Tvingstedt, K., Malinkiewicz, O., Baumann, A., Deibel, C., Snaith, H. J., Dyakonov, V., & Bolink, H. J. (2014) · Scientific Reports · doi:10.1038/srep06071 · Cited by 317
Self-citationTan, K. W., Moore, D. T., Saliba, M., Sai, H., Estroff, L. A., Hanrath, T., Snaith, H. J., & Wiesner, U. (2014) · ACS Nano · doi:10.1021/nn500526t · Cited by 293
Self-citationChloride in Lead Chloride-Derived Organo-Metal Halides for Perovskite-Absorber Solar Cells
Unger, E. L., Bowring, A. R., Tassone, C. J., Pool, V. L., Gold-Parker, A., Cheacharoen, R., Stone, K. H., Hoke, E. T., Toney, M. F., & McGehee, M. D. (2014) · Chemistry of Materials · doi:10.1021/cm503828b · Cited by 281
Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
Raga, S. R., Jung, M.-C., Lee, M. V., Leyden, M. R., Kato, Y., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm5041997 · Cited by 280
Grancini, G., Marras, S., Prato, M., Giannini, C., Quarti, C., De Angelis, F., De Bastiani, M., Eperon, G. E., Snaith, H. J., Manna, L., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501877h · Cited by 263
Self-citationSaliba, M., Tan, K. W., Sai, H., Moore, D. T., Scott, T., Zhang, W., Estroff, L. A., Wiesner, U., & Snaith, H. J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500717w · Cited by 241
Self-citationPathak, S., Sepe, A., Sadhanala, A., Deschler, F., Haghighirad, A., Sakai, N., Goedel, K. C., Stranks, S. D., Noel, N., Price, M., et al. (2015) · ACS Nano · doi:10.1021/nn506465n · Cited by 198
Self-citationDar, M. I., Arora, N., Gao, P., Ahmad, S., Grätzel, M., & Nazeeruddin, M. K. (2014) · Nano Letters · doi:10.1021/nl503279x · Cited by 193
Morphology control of the perovskite films for efficient solar cells
Zheng, L., Zhang, D., Ma, Y., Lu, Z., Chen, Z., Wang, S., Xiao, L., & Gong, Q. (2015) · Dalton Transactions · doi:10.1039/c4dt03869j · Cited by 168
Cited by
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
A polymer scaffold for self-healing perovskite solar cells
Zhao, Y., Wei, J., Li, H., Yan, Y., Zhou, W., Yu, D., & Zhao, Q. (2016) · Nature Communications · doi:10.1038/ncomms10228 · Cited by 667
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Humidity‐Induced Degradation via Grain Boundaries of HC(NH2)2PbI3 Planar Perovskite Solar Cells
Yun, J. S., Kim, J., Young, T., Patterson, R. J., Kim, D., Seidel, J., Lim, S., Green, M. A., Huang, S., & Ho‐Baillie, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705363 · Cited by 382
Palazon, F., Akkerman, Q. A., Prato, M., & Manna, L. (2016) · ACS Nano · doi:10.1021/acsnano.5b06536 · Cited by 369
Metadata
- Authors
- Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., Janssen, R. A. J., Petrozza, A., & Snaith, H. J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-06
- Volume
- 9
- Issue
- 9
- Pages
- 9380-9393
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2409321964
- Cited by
- 574
- References
- 39
- FWCI
- 30.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.