Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Top-down fabrication of nanostructures with high throughput is still a challenge. We demonstrate the fast (>10 m/min) and continuous fabrication of multilength scale structures by roll-to-roll UV-nanoimprint lithography on a 250 mm wide web. The large-area nanopatterning is enabled by a multicomponent UV-curable resist system (JRcure) with viscous, mechanical, and surface properties that are tunable over a wide range to either allow for usage as polymer stamp material or as imprint resist. The adjustable elasticity and surface chemistry of the resist system enable multistep self-replication of structured resist layers. Decisive for defect-free UV-nanoimprinting in roll-to-roll is the minimization of the surface energies of stamp and resist, and the stepwise reduction of the stiffness from one layer to the next is essential for optimizing the reproduction fidelity especially for nanoscale features. Accordingly, we demonstrate the continuous replication of 3D nanostructures and the high-throughput fabrication of multilength scale resist structures resulting in flexible polyethylenetherephtalate film rolls with superhydrophobic properties. Moreover, a water-soluble UV-imprint resist (JRlift) is introduced that enables residue-free nanoimprinting in roll-to-roll. Thereby we could demonstrate high-throughput fabrication of metallic patterns with only 200 nm line width.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Nanowire active-matrix circuitry for low-voltage macroscale artificial skin
Takei, K., Takahashi, T., Ho, J. C., Ko, H., Gillies, A. G., Leu, P. W., Fearing, R. S., & Javey, A. (2010) · Nature Materials · doi:10.1038/nmat2835 · Cited by 1,274
Cited by
Roadmap for Optical Metasurfaces
Kuznetsov, A. I., Brongersma, M. L., Yao, J., Chen, M. K., Levy, U., Tsai, D. P., Zheludev, N. I., Faraon, A., Arbabi, A., Yu, N., et al. (2024) · ACS Photonics · doi:10.1021/acsphotonics.3c00457 · Cited by 420
High‐Aspect‐Ratio Nanostructured Surfaces as Biological Metamaterials
Higgins, S. G., Becce, M., Belessiotis‐Richards, A., Seong, H., Sero, J. E., & Stevens, M. M. (2020) · Advanced Materials · doi:10.1002/adma.201903862 · Cited by 256
Ha, S. T., Li, Q., Yang, J. K. W., Demir, H. V., Brongersma, M. L., & Kuznetsov, A. I. (2024) · Science · doi:10.1126/science.adm7442 · Cited by 112
Diatom frustules decorated with zinc oxide nanoparticles for enhanced optical properties
Lamastra, F. R., Grilli, M. L., Leahu, G., Belardini, A., Voti, R. L., Sibilia, C., Salvatori, D., Cacciotti, I., & Nanni, F. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa7d6f · Cited by 33
A Rapid Thermal Nanoimprint Apparatus through Induction Heating of Nickel Mold
Fu, X., Chen, Q., Chen, X., Zhang, L., Yang, A., Cui, Y., Yuan, C., & Ge, H. (2019) · Micromachines · doi:10.3390/mi10050334 · Cited by 17
Metadata
- Authors
- Leitgeb, M., Nees, D., Ruttloff, S., Palfinger, U., Götz, J., Liska, R., Belegratis, M. R., & Stadlober, B.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-05
- Volume
- 10
- Issue
- 5
- Pages
- 4926-4941
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2312692142
- Cited by
- 118
- References
- 2
- FWCI
- 6.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography. https://app.cochat.ai/papers/10.1021/acsnano.5b07411
- The paper
- Leitgeb, M., Nees, D., Ruttloff, S., Palfinger, U., Götz, J., Liska, R., Belegratis, M. R., & Stadlober, B. (2016). Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography. ACS Nano. https://doi.org/10.1021/acsnano.5b07411
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.