The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
A Combination of Boron Nitride Nanotubes and Cellulose Nanofibers for the Preparation of a Nanocomposite with High Thermal Conductivity
Abstract
With the current development of modern electronics toward miniaturization, high-degree integration and multifunctionalization, considerable heat is accumulated, which results in the thermal failure or even explosion of modern electronics. The thermal conductivity of materials has thus attracted much attention in modern electronics. Although polymer composites with enhanced thermal conductivity are expected to address this issue, achieving higher thermal conductivity (above 10 W m –1 K –1 ) at filler loadings below 50.0 wt % remains challenging. Here, we report a nanocomposite consisting of boron nitride nanotubes and cellulose nanofibers that exhibits high thermal conductivity (21.39 W m –1 K –1 ) at 25.0 wt % boron nitride nanotubes. Such high thermal conductivity is attributed to the high intrinsic thermal conductivity of boron nitride nanotubes and cellulose nanofibers, the one-dimensional structure of boron nitride nanotubes, and the reduced interfacial thermal resistance due to the strong interaction between the boron nitride nanotubes and cellulose nanofibers. Using the as-prepared nanocomposite as a flexible printed circuit board, we demonstrate its potential usefulness in electronic device-cooling applications. This thermally conductive nanocomposite has promising applications in thermal interface materials, printed circuit boards or organic substrates in electronics and could supplement conventional polymer-based materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,603
The chips are down for Moore’s law
Waldrop, M. M. (2016) · Nature · doi:10.1038/530144a · Cited by 2,397
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Review of thermal conductivity in composites: Mechanisms, parameters and theory
Burger, N., Laachachi, A., Ferriol, M., Lutz, M., Toniazzo, V., & Ruch, D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.001 · Cited by 1,357
Functionalized hexagonal boron nitride nanomaterials: emerging properties and applications
Weng, Q., Wang, X., Wang, X., Bando, Y., & Golberg, D. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00869g · Cited by 1,282
High-performance green flexible electronics based on biodegradable cellulose nanofibril paper
Jung, Y. H., Chang, T.-H., Zhang, H., Yao, C., Zheng, Q., Yang, V. W., Mi, H., Kim, M., Cho, S. J., Park, D.-W., et al. (2015) · Nature Communications · doi:10.1038/ncomms8170 · Cited by 891
Interface effect on thermal conductivity of carbon nanotube composites
Nan, C.-W., Liu, G., Lin, Y., & Li, M. (2004) · Applied Physics Letters · doi:10.1063/1.1808874 · Cited by 860
Highly Anisotropic, Highly Transparent Wood Composites
Zhu, M., Song, J., Li, T., Gong, A., Wang, Y., Dai, J., Yao, Y., Luo, W., Henderson, D., & Hu, L. (2016) · Advanced Materials · doi:10.1002/adma.201600427 · Cited by 744
Self-citationHuang, X., Zhi, C., Jiang, P., Golberg, D., Bando, Y., & Tanaka, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201824 · Cited by 647
Zeng, X., Yao, Y., Gong, Z., Wang, F., Sun, R., Xu, J., & Wong, C. (2015) · Small · doi:10.1002/smll.201502173 · Cited by 618
Self-citationTransparent paper: fabrications, properties, and device applications
Zhu, H., Fang, Z., Preston, C., Li, Y., & Hu, L. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43024c · Cited by 550
Zhi, C., Bando, Y., Terao, T., Tang, C., Kuwahara, H., & Golberg, D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801435 · Cited by 519
Thermal Conduction in Aligned Carbon Nanotube–Polymer Nanocomposites With High Packing Density
Marconnet, A. M., Yamamoto, N., Panzer, M. A., Wardle, B. L., & Goodson, K. E. (2011) · ACS Nano · doi:10.1021/nn200847u · Cited by 474
Isotope Effect on the Thermal Conductivity of Boron Nitride Nanotubes
Chang, C. W., Fennimore, A. M., Afanasiev, A., Okawa, D., Ikuno, T., Garcia, H., Li, D., Majumdar, A., & Zettl, A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.085901 · Cited by 419
Goyal, V., & Balandin, A. A. (2012) · Applied Physics Letters · doi:10.1063/1.3687173 · Cited by 387
Hamedi, M. M., Hajian, A., Fall, A. B., Håkansson, K., Salajkova, M., Lundell, F., Wågberg, L., & Berglund, L. A. (2014) · ACS Nano · doi:10.1021/nn4060368 · Cited by 381
Kholmanov, I., Kim, J., Ou, E., Ruoff, R. S., & Shi, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b02917 · Cited by 341
Thermal properties and percolation in carbon nanotube-polymer composites
Bonnet, P., Sireude, D., Garnier, B., & Chauvet, O. (2007) · Applied Physics Letters · doi:10.1063/1.2813625 · Cited by 332
Nanocellulose as green dispersant for two-dimensional energy materials
Li, Y., Zhu, H., Shen, F., Wan, J., Lacey, S., Fang, Z., Dai, H., & Hu, L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.015 · Cited by 322
Zeng, X., Ye, L., Yu, S., Li, H., Sun, R., Xu, J., & Wong, C.-P. (2015) · Nanoscale · doi:10.1039/c5nr00228a · Cited by 286
Self-citationChitin Nanofiber Transparent Paper for Flexible Green Electronics
Jin, J., Lee, D., Im, H., Han, Y. C., Jeong, E. G., Rolandi, M., Choi, K. C., & Bae, B. (2016) · Advanced Materials · doi:10.1002/adma.201600336 · Cited by 280
Wang, S., Cheng, Y., Wang, R., Sun, J., & Gao, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500009p · Cited by 276
Self-citationGulotty, R., Castellino, M., Jagdale, P., Tagliaferro, A., & Balandin, A. A. (2013) · ACS Nano · doi:10.1021/nn400726g · Cited by 251
Terao, T., Zhi, C., Bando, Y., Mitome, M., Tang, C., & Golberg, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911431f · Cited by 220
Lu, H., Yao, Y., Huang, W. M., Leng, J., & Hui, D. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.03.007 · Cited by 158
Self-citationCrystallite Size Effect on Thermal Conductive Properties of Nonwoven Nanocellulose Sheets
Uetani, K., Okada, T., & Oyama, H. T. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00617 · Cited by 136
Silver nanowire array-polymer composite as thermal interface material
Ju, X., Munari, A., Dalton, E., Mathewson, A., & Razeeb, K. M. (2009) · Journal of Applied Physics · doi:10.1063/1.3271149 · Cited by 130
Thermal Conduction in Vertically Aligned Copper Nanowire Arrays and Composites
Barako, M. T., Roy, S., English, T. S., Kodama, T., Asheghi, M., Kenny, T. W., & Goodson, K. E. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05147 · Cited by 129
Thermal Conductivity Improvement of Polymer Films by Catechin-Modified Boron Nitride Nanotubes
Terao, T., Bando, Y., Mitome, M., Zhi, C., Tang, C., & Golberg, D. V. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp903159s · Cited by 123
Chen, H., Chen, M., Di, J., Xu, G., Li, H., & Li, Q. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp2086158 · Cited by 107
Nanowire-filled polymer composites with ultrahigh thermal conductivity
Balachander, N., Seshadri, I. P., Mehta, R. J., Schadler, L. S., Borca-Tasciuc, T., Keblinski, P., & Ramanath, G. (2013) · Applied Physics Letters · doi:10.1063/1.4793419 · Cited by 94
Thermal Conductivity of Nanostructured Boron Nitride Materials
Tang, C., Bando, Y., Liu, C., Fan, S., Zhang, J., Ding, X., & Golberg, D. V. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0607014 · Cited by 91
Mougel, J.-B., Adda, C., Bertoncini, P., Capron, I., Cathala, B., & Chauvet, O. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b07289 · Cited by 68
Lu, H., Huang, W., & Leng, J. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.02.003 · Cited by 64
Nautiyal, P., Loganathan, A., Agrawal, R., Boesl, B., Wang, C., & Agarwal, A. K. (2016) · Scientific Reports · doi:10.1038/srep29498 · Cited by 59
Stretchable Twisted‐Pair Transmission Lines for Microwave Frequency Wearable Electronics
Jung, Y. H., Lee, J., Qiu, Y., Cho, N., Cho, S. J., Zhang, H., Lee, S., Kim, T. J., Gong, S., & Ma, Z. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600856 · Cited by 51
Cited by
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Han, J., Du, G., Gao, W., & Bai, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900412 · Cited by 620
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Chen, J., Huang, X., Sun, B., Wang, Y., Zhu, Y., & Jiang, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08061 · Cited by 375
Metadata
- Authors
- Zeng, X., Sun, J., Yao, Y., Sun, R., Xu, J.-B., & Wong, C.-P.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-17
- Volume
- 11
- Issue
- 5
- Pages
- 5167-5178
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2605792304
- Cited by
- 523
- References
- 40
- FWCI
- 22.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
