The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
Plasmonic Ti3C2Tx MXene Enables Highly Efficient Photothermal Conversion for Healable and Transparent Wearable Device
Abstract
Skin-mountable and transparent devices are highly desired for next-generation electronic applications but are susceptible to unexpected ruptures or undesired scratches, which can drastically reduce the device lifetime. Developing wearable and transparent materials with healable function that can recover their original functionality after mechanical damage under mild and noninvasive repairing operation is thus imperative. Herein, we demonstrate that the incorporation of ultrasmall quantities of plasmonic silver nanoparticle (AgNP)@MXene nanosheet hybrids to serve as photothermal fillers in waterborne elastic polyurethane enables high transparency as well as effective light-triggered healing capabilities for wearable composite coatings. The AgNP@MXene hybrid functions as a highly effective photon captor, energy transformer, and molecular heater due to the amalgamation of (1) ultrahigh photothermal conversion efficiency, high thermal conductivity, and structural properties of MXene, (2) the outstanding plasmonic effect of AgNPs, and (3) the synergistic effects from their hybrids. The resulting wearable composite coating with ultralow loading of plasmonic AgNP@MXene hybrids (0.08 wt % or 0.024 vol %) can produce a significant temperature increase of ∼111 ± 2.6 °C after the application of 600 mW cm –2 light irradiation for 5 min, while maintaining a high optical transmittance of ∼83% at a thickness of ∼60 μm. This local temperature increase can rapidly heal the mechanical damage to the composite coating, with a healing efficiency above 97%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Cited by
Photothermal Nanomaterials: A Powerful Light-to-Heat Converter
Cui, X., Ruan, Q., Zhuo, X., Xia, X., Hu, J., Fu, R., Li, Y., Wang, J., & Xu, H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00159 · Cited by 1,944
Xu, D., Li, Z., Li, L., & Wang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000712 · Cited by 744
Flexible MXene‐Based Composites for Wearable Devices
Ma, C., Ma, M., Si, C., Ji, X., & Wan, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009524 · Cited by 544
Surface functionalization of MXenes
Mozafari, M., & Soroush, M. (2021) · Materials Advances · doi:10.1039/d1ma00625h · Cited by 395
Fan, X., Yang, Y., Shi, X., Liu, Y., Li, H., Liang, J., & Chen, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007110 · Cited by 366
Self-citationMXene as emerging nanofillers for high-performance polymer composites: A review
Gong, K., Zhou, K., Qian, X., Shi, C., & Yu, B. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108867 · Cited by 362
Zhou, B., Su, M., Yang, D., Han, G., Feng, Y., Wang, B., Ma, J., Ma, J., Liu, C., & Shen, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c09020 · Cited by 330
Li, M., Zhang, Y., Lian, L., Liu, K., Lu, M., Chen, Y., Zhang, L., Zhang, X., & Wan, P. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202208141 · Cited by 329
Self-citationMXenes: Synthesis, Optical Properties, and Applications in Ultrafast Photonics
Fu, B., Sun, J., Wang, C., Shang, C., Xu, L., Li, J., & Zhang, H. (2021) · Small · doi:10.1002/smll.202006054 · Cited by 328
Niobium and Titanium Carbides (MXenes) as Superior Photothermal Supports for CO2 Photocatalysis
Wu, Z., Li, C., Li, Z., Feng, K., Cai, M., Zhang, D., Wang, S., Chu, M., Zhang, C., Shen, J., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c00990 · Cited by 283
MXene/Polymer Nanocomposites: Preparation, Properties, and Applications
Chen, X., Zhao, Y., Li, L., Wang, Y., Wang, J., Xiong, J., Du, S., Zhang, P., Shi, X., & Yu, J. (2021) · Polymer Reviews · doi:10.1080/15583724.2020.1729179 · Cited by 279
Guselnikova, O., Lim, H., Kim, H., Kim, S. H., Gorbunova, A., Eguchi, M., Postnikov, P., Nakanishi, T., Asahi, T., Na, J., et al. (2022) · Small · doi:10.1002/smll.202107182 · Cited by 263
Metadata
- Authors
- Fan, X., Ding, Y., Liu, Y., Liang, J., & Chen, Y.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-19
- Volume
- 13
- Issue
- 7
- Pages
- 8124-8134
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2950295185
- Cited by
- 407
- References
- 73
- FWCI
- 14.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.