Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone)
Open accessThe DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index; 11 of the 31 sources its claims cite were checked for support.
Abstract
High Resolution Image Download MS PowerPoint Slide Well-defined six-arm star-branched bio-degradable block copolymers of l -lactide and ε-caprolactone were prepared using controlled ring-opening polymerization and a sequential monomer addition method using dipentaerythritol as the initiator core and organocatalysts at low temperatures in solution. Sequence of enchainment was changed by reversing the order of monomer addition giving, either, a crystalline PLA block or an amorphous PCL block as the outer segment. Well-defined six-arm poly(ε-caprolactone- b - l -lactide, 6s-PCL- b -PLA) block copolymers were obtained with a range of segment molecular weights. However, in the case of six-arm poly( l -lactide- b -ε-caprolactone, 6s-PLA- b -PCL), disruption of the block structure was observed on account of competing transesterification reactions accompanying a chain-growth reaction. Such sequence-controlled block copolymers showed interesting phase morphologies, as evidenced by differential scanning calorimetry (DSC) studies. 6s-PCL- b -PLA showed two glass-transition temperatures and two melting temperatures characteristic of the amorphous and crystalline blocks. 6s-PCL- b -PLA and 6s-PLA- b -PCL with different segment chain lengths were solution blended (10 wt %) with a commercially sourced PLA. All the blends were highly transparent. The structure and properties of the blend were examined by DSC, measurement of mechanical properties, and scanning electron microscopy. The results show that a phase-separated 6s-PCL- b -PLA copolymer results in two- to three-fold improvement in tensile toughness without the loss of modulus. A possible hypothesis for the mechanism of tensile toughness in the blend has been proposed.
Overview
CoChat Summary
## TL;DR
The paper reports that sequence-controlled six-arm star-branched PLA/PCL block copolymers can toughen PLA while preserving modulus, with the best performance from 6s-PCL-b-PLA. The authors argue that block sequence, segment molecular weight, and phase morphology strongly affect crystallization and tensile behavior.
## Key findings
- Six-arm star-branched block copolymers 6s-PCL-b-PLA and 6s-PLA-b-PCL were synthesized by sequential ring-opening polymerization in solution at low temperature, with targeted nominal Mn of 30,000, 50,000, and 70,000 g/mol.
- 6s-PCL-b-PLA was “well-defined,” while 6s-PLA-b-PCL showed disruption of block structure due to transesterification; all polymerization reactions were reported as well controlled with dispersities (Đ) in the range of 1.20 to 1.35 and Ieff generally between 0.90 and 0.95.
- Adding 10 wt % of either block copolymer to PLA improved % elongation at break with no significant loss of modulus; the paper states the best blend gave a two- to three-fold improvement in elongation at break without loss of modulus.
- The strongest improvement was observed for blends with block copolymers around Mn 46,000–47,000 g/mol; the paper notes poorer performance when Mn increased to about 66,000 g/mol and when the PLA segment was around 46,000 g/mol.
## Methods
- Sequential ring-opening polymerization was used to synthesize six-arm star-branched PCL and PLA macroinitiators and then block copolymers, using dipentaerythritol as the hexafunctional initiator; DBU catalyzed lactide polymerization and diphenyl phosphate (DPP) catalyzed ε-caprolactone polymerization.
- The PLA blend samples were prepared by solution blending 0.9 g PLA with 0.1 g block copolymer in dry dichloromethane, then cast into films by doctor blade and dried.
- Characterization included GPC, 1H and 13C NMR, DSC, tensile testing on five dumbbell specimens per sample, and SEM of fracture surfaces.
## Limitations
- The authors explicitly say that “further studies will be necessary” or “will be needed” to better understand the morphology, tensile toughening, and crystallization behavior, especially for 6s-PLA-b-PCL and the influence of monomer sequence.
- They note that some transesterification occurred during preparation of 6s-PLA-b-PCL, which complicates interpretation of that copolymer’s structure and properties.
- Evident from the text: the blend study is limited to 10 wt % additive in PLA, so the reported performance is not shown across a broader composition range.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures




![Figure 3 SEM of fractured surfaces of PLA and blends, PLA/6s-PCL-b-PLA and PLA/6s-PLA-b-PCL, after break of dumb-bell shaped specimens during tensile testing “[A: PLA; B: PLA+ 1a (6s-PCL-b-PLA, Mn = 27,300 g/mol); C: PLA + 1b (6s-PCL-b-PLA, Mn = 47,850 g/mol); D: PLA+ 1c (6s-PCL-b-PLA, Mn = 66,100 g/mol): E: PLA+ 2a (6s-PLA-b-PCL, Mn = 27,750 g/mol); F: PLA+2b (6s-PLA-b-PCL, Mn = 46,500 g/mol); and G: PLA+2c (6s-PLA-b-PCL, Mn = 66,350 g/mol)]”.](https://figures.cochat.ai/paper-figures/f92f216808904bcd80d1e46e72737838/toughening-poly-scp-l-scp-lactide-blends-effectiveness-of-sequence-controlled-figure-3.jpg)
Verification
Claims the paper makes
4 Valid · 3 Not valid · 14 Not checked · 87 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Most of the copolymers used are predominantly amorphous and ductile, for example, poly(ε-caprolactone),11 poly(ε-caprolactone-co-d, l-lactide),30 poly(ε-caprolactone-co-δ-valerolactone),31 and poly(lactide-b-polyethylene glycol).52”
§ Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) > Results and Discussion > Effect of Six-Arm Star-Branched Poly(ε-caprolactone-b-l-lactide) (6s-PCL-b-PLA) and Poly(l-lactide-b-ε-caprolactone) (6s-PLA-b-PCL) Copolymers on the Mechanical Properties of the PLA Blend
What the sources say
- Partly supportedcites [11] sourceExperimental — accuracy not yet measured
The Introduction describes poly(ε-caprolactone), the material attached to this citation, as soft and as having a rubbery amorphous phase at room temperature. It also calls PCL semicrystalline; it does not establish that PCL is predominantly amorphous. This citation does not bear on the other listed materials. (LLM, conf=0.83)
- Not matchedcites [30]
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Supportedcites [31] sourceExperimental — accuracy not yet measured
Citation 30 is attached specifically to poly(ε-caprolactone-co-d,l-lactide), not to every polymer in the sentence. A Semantic Scholar snippet from “Recent advances in high performance poly(lactide)” identifies Odent et al. (2013) as studying that random copolyester as an impact modifier and describes related materials as rubbery-like. The cited paper returned no paper-scoped snippets, so the amorphous and ductile characterization is supported indirectly rather than verified in its full text. The proposed Jing and Li match is only a title containing a different copolymer, not evidence of misattribution. (LLM, conf=0.82)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“It has also been reported that in brittle polymers, when multiple crazing mechanism dominates, the size of the dispersed phase in the matrix is about 2–3 μm.8”
§ Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) > Results and Discussion > Effect of Six-Arm Star-Branched Poly(ε-caprolactone-b-l-lactide) (6s-PCL-b-PLA) and Poly(l-lactide-b-ε-caprolactone) (6s-PLA-b-PCL) Copolymers on the Mechanical Properties of the PLA Blend
What the sources say
- Partly supportedcites [8] sourceExperimental — accuracy not yet measured
The section on particle size of flexible or elastic polymers in a PLA matrix says larger dispersed particles can initiate multiple crazes, which dominate in amorphous PLA. It does not give a general dispersed-phase size of 2–3 μm for brittle polymers; instead, it reports an optimum of 0.7–1.1 μm for amorphous PLA blends. Page numbers are unavailable in our copy. (LLM, conf=0.86)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The peaks due to carbonyl resonances appear between 169.1 and 169.7 ppm, which are attributed to the LLL sequence.”
§ Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) > Results and Discussion > Synthesis of 6s-PCL-b-PLA and 6s-PLA-b-PCL Block Copolymers
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Well-defined six-arm poly(ε-caprolactone-b-l-lactide, 6s-PCL-b-PLA) block copolymers were obtained with a range of segment molecular weights.”
§ Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Furthermore, the absence of additional responses in the region of carbonyl resonances indicates the absence of transesterification reaction.”
§ Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) > Results and Discussion > Synthesis of 6s-PCL-b-PLA and 6s-PLA-b-PCL Block Copolymers
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
71 more claims
Create a free account to see all 108 claims and every source verdict.
- Probably not a substantial claim. 17
- It may state two separate claims as one. 19
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“For polymers having Mn of 6,400 g/mol (Đ: 1.5) and 13, 410 g/mol (Đ: 1.15), reported Tg were 51.2 and 55.7 °C, respectively. This should be compared with the values reported herein for a six-arm star-branched polymer of ε-caprolactone, Tm: 54.0 °C for a polymer having Mn: 8,400 g/mol (Đ: 1.2) and Tm: 54.6 °C for a polymer having a Mn: 13,800 g/mol.”
§ Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) > Results and Discussion > Melting and Glass Transition of 6s-PCL-b-PLA and 6s-PLA-b-PCL Block Copolymers
Reported 55.7 · recomputed 2.8
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Organocatalytic Ring-Opening Polymerization
Kamber, N. E., Jeong, W., Waymouth, R. M., Pratt, R. C., Lohmeijer, B. G. G., & Hedrick, J. L. (2007) · Chemical Reviews · doi:10.1021/cr068415b · Cited by 1,489
Organocatalysis: Opportunities and Challenges for Polymer Synthesis
Kiesewetter, M. K., Shin, E. J., Hedrick, J. L., & Waymouth, R. M. (2010) · Macromolecules · doi:10.1021/ma9025948 · Cited by 907
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Organic Catalysis for Ring-Opening Polymerization
Dove, A. P. (2012) · ACS Macro Letters · doi:10.1021/mz3005956 · Cited by 541
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Cameron, D. J. A., & Shaver, M. P. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00091d · Cited by 421
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Research works printed but not linked: 2
- 10.1007/s00289-016-1713-4 · DOI
- Witzke, D. R. Introduction to Properties, Engineering and Prospects of Polylactide Polymers. Ph.D. Thesis; Michigan State University: East Lansing, MI, 1999; p 389.
Cited by
Yousfi, R. E., Brahmi, M., Dalli, M., Achalhi, N., Azougagh, O., Tahani, A., Touzani, R., & Idrissi, A. E. (2023) · Polymers · doi:10.3390/polym15081835 · Cited by 69
Gazquez-Navarro, J. J., Sanoguera, D. G., Balart, R., García‐García, D., & Gómez-Caturla, J. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03396-1 · Cited by 23
Toughening polylactide with nonlinear, degradable analogues of PEG and its copolymers
Li, H., Yan, Y., jiang, X., Lin, J., & Li, M. (2022) · Polymer Chemistry · doi:10.1039/d2py01307j · Cited by 15
Jeong, J., Yoon, S., Yang, X. M., & Kim, Y. J. (2023) · Polymers · doi:10.3390/polym15122617 · Cited by 13
Guo, M., Zhao, Z., Xie, Z., Wu, W., Wu, W., & Gao, Q. (2022) · Langmuir · doi:10.1021/acs.langmuir.2c02867 · Cited by 9
Plant oil fillers toughened poly(3-hydroxybutyrate) green biocomposites
Muiruri, J. K., Yeo, J. C. C., Run, H., Lin, T., Hou, X., Raveenkumar, V., Jian, B. Y., Thitsartarn, W., He, C., & Li, Z. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112926 · Cited by 8
Symmetric star poly(substituted glycolide) homopolymers and their surface properties
Çolak, Y., Belen, S. N., Çetin, D., Cengiz, U., & Mert, O. (2024) · Polymer Chemistry · doi:10.1039/d4py01229a · Cited by 8
Mechanical Properties of PLA/PCL Blends Compatibilized with PEG‐b‐PCL Multiblock Copolymer
Staffa, L. H., Bettini, S. H. P., & Chinelatto, M. A. (2022) · Macromolecular Symposia · doi:10.1002/masy.202200039 · Cited by 7
Review: Syntheses of poly(lactic acid)s and their block copolymers for drug delivery applications
Oktavia, L. W., Bégué, D., Campana, P. T., & Hiorns, R. C. (2023) · Polymer International · doi:10.1002/pi.6529 · Cited by 7
Haddouchy, H., Loughmari, S., Tahiri, Y., et al. (2025) · Chemical Papers · doi:10.1007/s11696-025-04569-5 · Cited by 4
Synthesis and Characterization of Poly(DL-lactide) Containing Fluorene Structures
Yu, C.-F., Rwei, S., Yang, S., Tsen, W., & Lin, L. (2023) · Polymers · doi:10.3390/polym15112555 · Cited by 5
Synthesis, Thermal and Mechanical Properties of Linear and Star Poly(L‐lactide)s
Nanok, T., Khanom, N., Hormnirun, P., Chansaenroch, C., & Laobuthee, A. (2023) · ChemistrySelect · doi:10.1002/slct.202301046 · Cited by 3
Yousfi, R. E., Farcaş, E., Atanase, L. I., Delaite, C., Achalhi, N., Belkadi, M. C., & Idrissi, A. E. (2025) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2025.128322 · Cited by 2
Buchatip, S., Supmak, W., Sangroniz, L., Opaprakasit, M., Petchsuk, A., Opaprakasit, P., & Müller, A. J. (2025) · ACS Omega · doi:10.1021/acsomega.5c03596 · Cited by 3
Well-controlled synthesis of biodegradable polyesters using edible catalysts
Miwa, T., Suzuki, R., Gao, T., Yamamoto, T., Li, F., Isono, T., & Satoh, T. (2026) · Green Chemistry · doi:10.1039/d5gc05933j · Cited by 2
Guo, M., Wu, W., Wu, W., Wang, R., & Gao, Q. (2023) · New Journal of Chemistry · doi:10.1039/d2nj05098f · Cited by 1
Toughening of Poly(lactic acid): Strategies and Tradeoffs
Koh, J. J., Muiruri, J. K., Yeo, J. C. C., Hou, X., & He, C. (2026) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2026.102179
Du, Y., Liu, G., Zhou, L., Hu, J., Wang, W., Bian, X., Duan, R., & Chen, X. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03165 · Cited by 1
Sriyai, M., Chaiwon, T., Meepowpan, P., Molloy, R., Nalampang, K., Worajittiphon, P., Kaabbuatong, N., & Punyodom, W. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05735-1 · Cited by 1
The Ring-Opening Co-Polymerization of ε-Caprolactone and L-Lactide by TiO2-SiO2 in Eutectic MixturesPreprint
Alvarado-Molina, G., Quiñonez-Angulo, M., Ruíz-Baltazar, Á. D. J., Mota-Morales, J. D., Ríos, E. H., & López, S. Y. R. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.5047443
Metadata
- Authors
- Deokar, M. D., Garnaik, B., & Sivaram, S.
- Affiliations
- National Chemical Laboratory (IN)
- Indian Institute of Science Education and Research Pune (IN)
- Corresponding author
- Sivaram, Swaminathan
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-03-09
- Volume
- 7
- Issue
- 11
- Pages
- 9118-9129
- ISSN
- 2470-1343 (ISSN-L)
- PMC
- PMC8945082
- OpenAlex
- W4220760098
- Cited by
- 21
- References
- 60
- Citations by year
- 2026: 4 · 2025: 4 · 2024: 4 · 2023: 6 · 2022: 3
- FWCI
- 1.06
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- ACS Omega (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Indian National Science Academy
- Council of Scientific and Industrial Research
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- poly(L-lactic acid), polycaprolactone, sequence-controlled polymerization, ring-opening polymerization, organocatalysts, transesterification, polymer blends, tensile toughness, phase separation, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.