CoChat

Separation of Lithium from Aluminum-Containing Clay Mineral Leachate Solution Using Energy-Efficient Membrane Solvent Extraction

Open access

The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.

Abstract

High Resolution Image Download MS PowerPoint Slide This study investigated a novel membrane solvent extraction (MSX) process for the recovery and separation of lithium (Li) from clay minerals using a cation exchange organic extractant [di-(2-ethylhexyl)phosphoric acid] (DEHPA). The Li is selectively extracted from clay mineral leachate solution using highly efficient aluminum hydroxide sorbents to form lithium aluminum double hydroxide sulfate (LDH sulfate) as the precipitate. Several delithiation methods have been explored to separate Li from aluminum (Al). LDH sulfate is dissolved in dilute H 2 SO 4 and used as the feed solution, and DEHPA is used to selectively separate Li and Al from the feed solution. The MSX process immobilizes DEHPA in the microporous membrane pores and continuously removes Al from the feed solution to obtain pure Li. The efficiency of DEHPA for the selective separation of Li from Al is determined by measuring its distribution coefficient. This study used the optimum feed solution pH of 3, strip solution concentration of 2 mol/L H 2 SO 4, and an organic phase composition of 30% v/v DEHPA in Isopar-L. The MSX process achieved a Li yield of about 92% and a purity of ⩾ 94%. The results suggest that the innovative MSX technology is a time- and energy-efficient approach for the recovery and separation of high-purity Li for application in Li-ion batteries and other clean energy technologies.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsomega.3c05009

Cites

30 of 30 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic of the MSX system used to separate Li from Al in LDH sulfate.
Figure 1 Schematic of the MSX system used to separate Li from Al in LDH sulfate.CC BY-NC-ND · PubMed Central
Figure 2 Li and Al separation performance using MSX: (a) feed concentration, (b) strip concentration, (c) purity of Li in the feed solution, and (d) extraction rate.
Figure 2 Li and Al separation performance using MSX: (a) feed concentration, (b) strip concentration, (c) purity of Li in the feed solution, and (d) extraction rate.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 30 references

Cited by

Metadata

Authors
Wagh, P., Islam, S. Z., Lamichhane, T. N., Bhave, R. R., & Paranthaman, M. P.
Affiliations
Oak Ridge National Laboratory (US)
Corresponding author
Paranthaman, Mariappan Parans
Venue
ACS Omega
Published
2023-11-30
Volume
8
Issue
49
Pages
46523-46527
ISSN
2470-1343 (ISSN-L)
OpenAlex
W4389164562
Cited by
20
References
29
Citations by year
2026: 8 · 2025: 6 · 2024: 6
FWCI
1.97
Type
journal article
Language
en
Open access
Locations
  • ACS Omega (publishedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
  • Vehicle Technologies Program
  • Advanced Materials and Manufacturing Technologies Office
Topics
  • Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Chemical Synthesis and Characterization
Keywords
lithium recovery, D2EHPA, delithiation, lithium-ion battery materials, energy-efficient separation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.