The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Reinforcement of Polycaprolactone/Chitosan with Nanoclay and Controlled Release of Curcumin for Wound Dressing
Abstract
A novel clay-reinforced polycaprolactone/chitosan/curcumin (PCl/CS/Clay/Cur) composite film was fabricated in this study. The prepared Cur-loading composite films were characterized with attenuated total reflection Fourier transformed infrared spectroscopy, scanning electron microscopy, atomic force microscopy, water contact angle, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction, and the results showed good dispersion of clay in the composite films. The addition of nanoclay was found to significantly increase the tensile strength. Also, the clay-enhanced drug-loading films exhibited better controlled-release profiles of Cur than those membranes without clay. Skin disinfection test demonstrated that the curcumin-loaded film could protect wound from bacterial infection. Cytotoxicity analysis proved the good biocompatibility of the composite films. The clay-enhanced Cur-loading films might be promising candidates for wound care.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“By increasing the chitosan concentration in the blended films (0.25 g H), the attraction between the anion and cation decreases. The cations from CS may form intramolecular bonds rather than intermolecular bonding with H due to the lack of anion in honey’s molecular structure. Intramolecular bonding led to a reduction in film rigidity [60].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [60]
In the citing paper
“Also, lower tensile strength and Young’s modulus may be due to the increased porosity of the films [47,60,68].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [60]
In the citing paper
“Intramolecular bonding led to a reduction in film rigidity and decreased tensile strength [60].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [60]
In the citing paper
“The increase in elongation is due to intramolecular hydrogen bonding rather than interatomic hydrogen bonding.”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [60]
In the citing paper
“This will lead to a reduction in film rigidity [44,60].”
From Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin (2023) · cites this paper as [60]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation and antibacterial activity of chitosan nanoparticles
Qi, L., Xu, Z., Jiang, X., Hu, C., & Zou, X. (2004) · Carbohydrate Research · doi:10.1016/j.carres.2004.09.007 · Cited by 1,804
Chitosan/clay nanocomposite film preparation and characterization
Xu, Y., Ren, X., & Hanna, M. A. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22664 · Cited by 301
Research works printed but not linked: 44
- Lin, 2017, Development of chitosan/poly-γ-glutamic acid/pluronic/curcumin nanoparticles in chitosan dressings for wound regeneration, J. Biomed. Mater. Res., Part B, 105, 81, 10.1002/jbm.b.33394 · DOI
- Aragona, 2017, Defining stem cell dynamics and migration during wound healing in mouse skin epidermis, Nat. Commun., 8, 14684, 10.1038/ncomms14684 · DOI · Paper page
- Dai, 2009, Chitosan-alginate sponge: preparation and application in curcumin delivery for dermal wound healing in rat, J. Biomed. Biotechnol., 2009, 595126, 10.1155/2009/595126 · DOI · Paper page
- Merrell, 2009, Curcumin-loaded poly(ε-caprolactone) nanofibres: diabetic wound dressing with anti-oxidant and anti-inflammatory properties, Clin. Exp. Pharm. Physiol., 36, 1149, 10.1111/j.1440-1681.2009.05216.x · DOI · Paper page
- Liang, 2008, Synthesis and anti-inflammatory activities of mono-carbonyl analogues of curcumin, Bioorg. Med. Chem. Lett., 18, 1525, 10.1016/j.bmcl.2007.12.068 · DOI
- Abe, 1999, Curcumin inhibition of inflammatory cytokine production by human peripheral blood monocytes and alveolar macrophages, Pharm. Res., 39, 41, 10.1006/phrs.1998.0404 · DOI · Paper page
- Huang, 1991, Inhibitory effects of curcumin on in vitro lipoxygenase and cyclooxygenase activities in mouse epidermis, Cancer Res., 51, 813
- Vaughn, 2017, Potential role of curcumin against biofilm-producing organisms on the skin: a review, Phytother. Res., 31, 1807, 10.1002/ptr.5912 · DOI
- Gopinath, 2004, Dermal wound healing processes with curcumin incorporated collagen films, Biomaterials, 25, 1911, 10.1016/S0142-9612(03)00625-2 · DOI · Paper page
- Ng, 2007, In vivo evaluation of an ultra-thin polycaprolactone film as a wound dressing, J. Biomater. Sci., Polym. Ed., 18, 925, 10.1163/156856207781367693 · DOI
- Al-Omair, 2015, Synthesis of Antibacterial Silver–poly(ε-caprolactone)-methacrylic acid graft copolymer nanofibers and their evaluation as potential wound dressing, Polymer, 7, 1464, 10.3390/polym7081464 · DOI
- Liu, 2016, Ultrasound-mediated preparation and evaluation of a collagen/PVP-PCL micro-and nanofiber scaffold electrospun from chloroform/ethanol mixture, Fibers Polym., 17, 1186, 10.1007/s12221-016-6400-4 · DOI
- Ramasamy, 2015, Characterization and wound healing property of collagen–chitosan film from sepia kobiensis (Hoyle, 1885), Int. J. Biol. Macromol., 74, 93, 10.1016/j.ijbiomac.2014.11.034 · DOI
- Lin, 2018, Photo-crosslinked keratin/chitosan membranes as potential wound dressing materials, Polymer, 10, 987, 10.3390/polym10090987 · DOI
- Chen, 2016, Study on the cross-linking effect of a natural derived oxidized chitosan oligosaccharide on the porcine acellular dermal matrix, RSC Adv., 6, 38052, 10.1039/C6RA03434A · DOI
- Liu, 2017, A novel grapheme oxide-modified collagen-chitosan bio-film for controlled growth factor release in wound healing applications, Mater. Sci. Eng., C, 77, 202, 10.1016/j.msec.2017.03.256 · DOI
- Liu, 2016, Feasibility study of the natural derived chitosan dialdehyde for chemical modification of collagen, Int. J. Biol. Macromol., 82, 989, 10.1016/j.ijbiomac.2015.11.015 · doi:10.1016/j.ijbiomac.2015.11.015
- Gupta, 2000, Preparation, characterization and release profiles of pH-sensitive chitosan beads, Polym. Int., 49, 141, 10.1002/(SICI)1097-0126(200002)49:2<141::AID-PI303>3.0.CO;2-0 · DOI
- Salgado, 2012, Characterization of chitosan and polycaprolactone membranes designed for wound repair application, J. Mater. Sci., 47, 659, 10.1007/s10853-011-5836-6 · DOI
- Poornima, 2017, Fabrication of chitosan-polycaprolactone composite nanofibrous scaffold for simultaneous delivery of ferulic acid and resveratrol, Carbohydr. Polym., 157, 1741, 10.1016/j.carbpol.2016.11.056 · DOI · Paper page
- Podsiadlo, 2007, Ultrastrong and stiff layered polymer nanocomposites, Science, 318, 80, 10.1126/science.1143176 · DOI · Paper page
- Dawson, 2013, Clay: new opportunities for tissue regeneration and biomaterial design, Adv. Mater., 25, 4069, 10.1002/adma.201301034 · DOI · Paper page
- Han, 2017, Mussel-inspired adhesive and tough hydrogel based on nanoclay confined dopamine polymerization, ACS Nano, 11, 2561, 10.1021/acsnano.6b05318 · DOI · Paper page
- Li, 2014, Evaluation of bacterial cellulose/hyaluronan nanocomposite biomaterials, Carbohydr. Polym., 103, 496, 10.1016/j.carbpol.2013.12.059 · doi:10.1016/j.carbpol.2013.12.059
- Figueira, 2016, Production and characterization of polycaprolactone- hyaluronic acid/chitosan- zein electrospun bilayer nanofibrous membrane for tissue regeneration, Int. J. Biol. Macromol., 93, 1100, 10.1016/j.ijbiomac.2016.09.080 · DOI · Paper page
- Noori, 2018, Poly(vinyl alcohol)/chitosan/honey/clay responsive nanocomposite hydrogel wound dressing, J. Appl. Polym. Sci., 135, 46311, 10.1002/app.46311 · DOI · Paper page
- Yallapu, 2010, Fabrication of curcumin encapsulated PLGA nanoparticles for improved therapeutic effects in metastatic cancer cells, J. Colloid Interface Sci., 351, 19, 10.1016/j.jcis.2010.05.022 · DOI · Paper page
- Yeum, 2011, Novel poly (vinyl alcohol)/clay nanocomposite microspheres via suspension polymerization and saponification, Polym.-Plast. Technol. Eng., 50, 1149, 10.1080/03602559.2011.566302 · doi:10.1080/03602559.2011.566302
- Chen, 2006, Poly (ε-caprolactone)– clay nanocomposites: structure and mechanical properties, Macromolecules, 39, 747, 10.1021/ma052154a · DOI
- Lai, 2014, Overview of the preparation of organic polymeric nanoparticles for drug delivery based on gelatine, chitosan, poly( d , l -lactide-co-glycolic acid) and polyalkylcyanoacrylate, Colloid Surf., B, 118, 154, 10.1016/j.colsurfb.2014.03.017 · DOI · Paper page
- Soares, 2016, Chitosan-based nanoparticles as drug delivery systems for doxorubicin: Optimization and modelling, Carbohydr. Polym., 147, 304, 10.1016/j.carbpol.2016.03.028 · DOI · Paper page
- Ianchis, 2018, Hydrogel-clay nanocomposites as carriers for controlled release, Curr. Med. Chem., 10.2174/0929867325666180831151055 · DOI
- Joshi, 2009, Montmorillonite as a drug delivery system: intercalation and in vitro release of timolol maleate, Int. J. Pharm., 374, 53, 10.1016/j.ijpharm.2009.03.004 · DOI · Paper page
- Yuan, 2010, Controlled and extended drug release behavior of chitosan-based nanoparticle carrier, Acta Biomater., 6, 1140, 10.1016/j.actbio.2009.08.027 · DOI · Paper page
- Kevadiya, 2015, Application and evaluation of layered silicate–chitosan composites for site specific delivery of diclofenac, Biocybern. Biomed. Eng., 35, 120, 10.1016/j.bbe.2014.08.004 · DOI
- Hua, 2010, Controlled release of ofloxacin from chitosan–montmorillonite hydrogel, Appl. Clay Sci., 50, 112, 10.1016/j.clay.2010.07.012 · DOI
- Hsu, 2012, Biocompatibility and antimicrobial evaluation of montmorillonite/chitosan nanocomposites, Appl. Clay Sci., 56, 53, 10.1016/j.clay.2011.09.016 · DOI
- Maisanaba, 2014, In vivo toxicity evaluation of the migration extract of an organomodified clay-poly(lactic) acid nanocomposite, J. Toxicol. Environ. Health, 77, 731, 10.1080/15287394.2014.890987 · DOI
- Maisanaba, 2015, Toxicological evaluation of clay minerals and derived nanocomposites: a review, Environ. Res., 138, 233, 10.1016/j.envres.2014.12.024 · DOI · Paper page
- Liu, 2016, Preparation and characterization of an advanced collagen aggregate from porcine acellular dermal matrix, Int. J. Biol. Macromol., 88, 179, 10.1016/j.ijbiomac.2016.03.066 · DOI
- Singh, 2009, A study towards release dynamics of thiram fungicide from starch-alginate beads to control environmental and health hazards, J. Hazard. Mater., 161, 208, 10.1016/j.jhazmat.2008.03.074 · DOI
- Fan, 2017, Mussel-inspired synthesis of NIR-responsive and biocompatible Ag-graphene 2D nano-agents for versatile bacterial disinfections, ACS Appl. Mater. Interfaces, 10, 296, 10.1021/acsami.7b16283 · DOI
- Huang, 2019, Facile fabrication of gelatin and polycaprolactone based bilayered membranes via spin coating method with antibacterial and cyto-compatible properties, Int. J. Biol. Macromol., 124, 699, 10.1016/j.ijbiomac.2018.11.262 · DOI
- Huang, 2018, Bilayered antimicrobial nanofiber membranes for wound dressings via in situ cross-Linking polymerization and electrospinning, Ind. Eng. Chem. Res., 57, 17048, 10.1021/acs.iecr.8b03122 · DOI
Cited by
Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin
Madian, N. G., El-Ashmanty, B. A., & Abdel-Rahim, H. K. (2023) · Polymers · doi:10.3390/polym15122587 · Cited by 66
Metadata
- Authors
- Huang, Y., Dan, N., Dan, W., & Zhao, W.
- Affiliations
- Sichuan University , , ,
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-12-19
- Volume
- 4
- Issue
- 27
- Pages
- 22292-22301
- ISSN
- 2470-1343
- Cited by
- 62
- References
- 2
- Language
- en
- Funders
- Ministry of Education of the People's Republic of China
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.