Stereocomplex Poly(lactic acid) Alloys with Superb Heat Resistance and Toughness
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Biobased, biocompatible, and biodegradable poly(lactic acid), PLA, possesses unique properties that give it high potential for a wide range of applications. However, its low thermal stability and brittleness are major obstacles for its use. In this study, both the thermal stability and toughness of PLA were simultaneously improved via stereocomplexation and reactive blending, by generating alloys composed of two PLA enantiomers, PLLA and PDLA, together with poly(ethylene- ran -methylacrylate– ran -glycidyl methacrylate), EMA-GMA. It was found that reactive blending at 200 °C was very effective in generating alloys with high degrees of stereocomplex (sc) crystallinity and that the interfacial reaction between PLA and EMA-GMA contributed to a significant improvement in toughness. Most importantly, a (40/40/20)PLLA/PDLA/EMA-GMA film with high sc crystallinity exhibited both much higher tensile impact strength and thermal stability than neat PLLA, retaining high storage modulus up to 210 °C. The scPLA alloys also exhibited superior chemical resistance to neat PLA. Thus, it was demonstrated that simultaneous complexation and the interfacial reaction transform PLA to the level of high performance materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
Effect of the addition of poly (D-lactic acid) on the thermal property of poly (L-lactic acid)
Yamane, H., & Sasai, K. (2003) · Polymer · doi:10.1016/s0032-3861(03)00092-2 · Cited by 266
Stereocomplex formation between enantiomeric poly(lactic acid)s. 6. Binary blends from copolymers
Tsuji, H., & Ikada, Y. (1992) · Macromolecules · doi:10.1021/ma00047a024 · Cited by 228
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
Xu, H., Tang, S., Chen, J., Yin, P., Pu, W., & Lu, Y. (2012) · Polymer Bulletin · doi:10.1007/s00289-011-0673-y · Cited by 25
Cited by
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Park, H.-S., & Hong, C.-K. (2021) · Polymers · doi:10.3390/polym13111851 · Cited by 85
Wang, H., Yu, J., Fang, H., Wei, H., Wang, X., & Ding, Y. (2018) · Polymer · doi:10.1016/j.polymer.2017.12.067 · Cited by 56
Deng, S., Yao, J., Bai, H., Xiu, H., Zhang, Q., & Fu, Q. (2021) · Polymer · doi:10.1016/j.polymer.2021.123736 · Cited by 45
Influence of scPLA microsphere on the crystallization behavior of PLLA/PDLA composites
Ma, B., Zhang, H., Wang, K., Xu, H., He, Y., & Wang, X. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100380 · Cited by 37
Metadata
- Authors
- Oyama, H. T., & Abe, S.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-12
- Volume
- 3
- Issue
- 12
- Pages
- 3245-3252
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2518510577
- Cited by
- 63
- References
- 8
- FWCI
- 2.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Stereocomplex Poly(lactic acid) Alloys with Superb Heat Resistance and Toughness. https://app.cochat.ai/papers/10.1021/acssuschemeng.5b00832
- The paper
- Oyama, H. T., & Abe, S. (2015). Stereocomplex Poly(lactic acid) Alloys with Superb Heat Resistance and Toughness. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.5b00832
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.