The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Carbon Aerogels with Excellent CO2 Adsorption Capacity Synthesized from Clay-Reinforced Biobased Chitosan-Polybenzoxazine Nanocomposites
Abstract
The present study reports for the first time the use of biobased chitosan-polybenzoxazine (CTS-PBZ) as a precursor for high CO 2 adsorbing carbon aerogels (CAs). Montmorillonite (MMT) is used to reinforce the CTS-PBZ aerogel. MMT-CTS-PBZ nanocomposite aerogels are synthesized using the freeze-drying technique and then cross-linked via ring-opening polymerization of benzoxazine followed by carbonization at 800 °C. Polybenzoxazine improves the structural stability for removing CO 2 from the environment even at a high pressure. The properties of polymeric and nanocomposite aerogels have been evaluated using X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The microstructure of the CAs is characterized by N 2 adsorption–desorption measurements. The CAs exhibit mesoporous materials with pore sizes in the range of 2–7 nm and high BET surface area. The total pore volume of CAs is as large as 0.296 cm 3 g –1, and the maximum BET surface area is 710 m 2 g –1 . Breakthrough curves of CO 2 adsorption show high CO 2 adsorption capacity at ambient conditions and excellent CO 2 adsorption–desorption reversible performance with a maximum of 5.72 mmol g –1 . Adsorption isotherms and thermodynamic properties of CO 2 adsorption are described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Stuckert, A. N., & Yang, R. T. (2011) · Environmental Science & Technology · doi:10.1021/es202647a · Cited by 289
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Gong, J., Michalkiewicz, B., Chen, X., Mijowska, E., Liu, J., Jiang, Z., Wen, X., & Tang, T. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500603h · Cited by 136
Cited by
Recent advances in aerogels for environmental remediation applications: A review
Maleki, H. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.098 · Cited by 679
Recent advances in preparations and applications of carbon aerogels: A review
Lee, J.-H., & Park, S.-J. (2020) · Carbon · doi:10.1016/j.carbon.2020.02.073 · Cited by 471
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
Review of pre-combustion capture and ionic liquid in carbon capture and storage
Theo, W. L., Lim, J. S., Hashim, H., Mustaffa, A. A., & Ho, W. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.103 · Cited by 396
Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review
Kamran, U., & Park, S.-J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125776 · Cited by 262
Metadata
- Authors
- Alhwaige, A. A., Ishida, H., & Qutubuddin, S.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-15
- Volume
- 4
- Issue
- 3
- Pages
- 1286-1295
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2256415080
- Cited by
- 192
- References
- 6
- FWCI
- 16.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.