The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Synthesis and Characterization of Bio-based Epoxy Resins Derived from Vanillyl Alcohol
Abstract
Vanillyl alcohol, a lignin derived aromatic diol, is a potential platform chemical for the production of renewable epoxy thermosets. A bio-based bisphenolic analogue, bisguaiacol (BG), was synthesized via electrophilic aromatic condensation of vanillyl alcohol and guaiacol, from which diglycidyl ether of BG (DGEBG) was prepared. In addition, three single aromatic diglycidyl ethers were synthesized from vanillyl alcohol (DGEVA), gastrodigenin (DGEGD), and hydroquinone (DGEHQ). All epoxies were characterized via 1 H NMR, 13 C NMR, FTIR, MS, and GPC. Dynamic mechanical analyses of the epoxies by themselves or blended with a commercial epoxy resin and cured with a diamine were conducted to determine the effect of the methoxy and methylene moieties on polymer properties. The thermomechanical results indicate that the methoxy lowers the glass transition temperature ( T g ) yet increases the glassy storage modulus at 25 °C, while the methylene spacer between the aromatic ring and the epoxide further lowers the T g in cured epoxy–amine systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Human exposure to bisphenol A (BPA)
Vandenberg, L. N., Hauser, R., Marcus, M., Olea, N., & Welshons, W. V. (2007) · Reproductive Toxicology · doi:10.1016/j.reprotox.2007.07.010 · Cited by 2,885
Peppas, N. A. (1992) · Journal of Controlled Release · doi:10.1016/0168-3659(92)90108-4 · Cited by 2,043
Plant oil renewable resources as green alternatives in polymer science
Meier, M. A. R., Metzger, J. O., & Schubert, U. S. (2007) · Chemical Society Reviews · doi:10.1039/b703294c · Cited by 1,487
Introduction to Physical Polymer Science
Stamm, M. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600086 · Cited by 1,233
Biobased Thermosetting Epoxy: Present and Future
Auvergne, R., Caillol, S., David, G., Boutevin, B., & Pascault, J.-P. (2014) · Chemical Reviews · doi:10.1021/cr3001274 · Cited by 1,159
Lignin as Renewable Raw Material
Calvo‐Flores, F. G., & Dobado, J. A. (2010) · ChemSusChem · doi:10.1002/cssc.201000157 · Cited by 977
Holladay, J. E., White, J. F., Bozell, J. J., & Johnson, D. (2007) · doi:10.2172/921839 · Cited by 905
Polymer Science and Technology
(2010) · Chemistry International -- Newsmagazine for IUPAC · doi:10.1515/ci.2010.32.3.32a · Cited by 818
The pyrolytic degradation of wood-derived lignin from pulping process
Shen, D. K., Gu, S., Luo, K. H., Wang, S. R., & Fang, M. X. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.078 · Cited by 452
An integrated process to produce vanillin and lignin-based polyurethanes from Kraft lignin
Silva, E. A. B. D., Zabkova, M., Araújo, J. D., Cateto, C. A., Barreiro, M. F., Belgacem, M. N., & Rodrigues, A. E. (2009) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2009.05.008 · Cited by 444
Turning renewable resources into value-added polymer: development of lignin-based thermoplastic
Saito, T., Brown, R. H., Hunt, M. A., Pickel, D. L., Pickel, J. M., Messman, J. M., Baker, F. S., Keller, M., & Naskar, A. K. (2012) · Green Chemistry · doi:10.1039/c2gc35933b · Cited by 395
Bio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomers
Ma, S., Liu, X., Jiang, Y., Tang, Z., Zhang, C., & Zhu, J. (2013) · Green Chem. · doi:10.1039/c2gc36715g · Cited by 346
Vanillin: Synthetic Flavoring from Spent Sulfite Liquor
Hocking, M. B. (1997) · Journal of Chemical Education · doi:10.1021/ed074p1055 · Cited by 313
Stemmelen, M., Pessel, F., Lapinte, V., Caillol, S., Habas, J., & Robin, J. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24674 · Cited by 287
Vanillin production from lignin oxidation in a batch reactor
Araújo, J. D. P., Grande, C. A., & Rodrigues, A. E. (2010) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.01.021 · Cited by 272
New vanillin-derived diepoxy monomers for the synthesis of biobased thermosets
Fache, M., Auvergne, R., Boutevin, B., & Caillol, S. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.10.011 · Cited by 252
High Biobased Content Epoxy–Anhydride Thermosets from Epoxidized Sucrose Esters of Fatty Acids
Pan, X., Sengupta, P. P., & Webster, D. C. (2011) · Biomacromolecules · doi:10.1021/bm200549c · Cited by 243
Preparation and properties of bio-based epoxy networks derived from isosorbide diglycidyl ether
Chrysanthos, M., Galy, J., & Pascault, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.06.001 · Cited by 240
Vanillin-based resin for use in composite applications
Stanzione III, J. F., Sadler, J. M., La Scala, J. J., Reno, K. H., & Wool, R. P. (2012) · Green Chemistry · doi:10.1039/c2gc35672d · Cited by 208
Self-citationSynthesis and Characterization of Thermosetting Furan-Based Epoxy Systems
Hu, F., La Scala, J. J., Sadler, J. M., & Palmese, G. R. (2014) · Macromolecules · doi:10.1021/ma500687t · Cited by 207
Self-citationFine Chemicals from Lignosulfonates. 1. Synthesis of Vanillin by Oxidation of Lignosulfonates
Bjørsvik, H.-R., & Minisci, F. (1999) · Organic Process Research & Development · doi:10.1021/op9900028 · Cited by 189
Primary and secondary lignin pyrolysis reaction pathways
Jegers, H. E., & Klein, M. T. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200028a030 · Cited by 182
Glycerin as a Renewable Feedstock for Epichlorohydrin Production. The GTE Process
Bell, B. M., Briggs, J. R., Campbell, R. M., Chambers, S. M., Gaarenstroom, P. D., Hippler, J. G., Hook, B. D., Kearns, K., Kenney, J. M., Kruper, W. J., et al. (2008) · CLEAN – Soil, Air, Water · doi:10.1002/clen.200800067 · Cited by 162
Kinetics of Vanillin Production from Kraft Lignin Oxidation
Fargues, C., Mathias, Á., & Rodrigues, A. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950267k · Cited by 160
Wang, Z., Zhang, X., Wang, R., Kang, H., Qiao, B., Ma, J., Zhang, L., & Wang, H. (2012) · Macromolecules · doi:10.1021/ma301938a · Cited by 149
Novel biobased epoxy compounds: epoxidized sucrose esters of fatty acids
Pan, X., Sengupta, P. P., & Webster, D. C. (2011) · Green Chemistry · doi:10.1039/c0gc00882f · Cited by 147
Bio-Based Alternative to the Diglycidyl Ether of Bisphenol A with Controlled Materials Properties
Maiorana, A., Spinella, S., & Gross, R. A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00014 · Cited by 145
The influence of chemical structure on the properties in methacrylate-based dentin adhesives
Park, J., Eslick, J. C., Ye, Q., Misra, A. K., & Spencer, P. (2011) · Dental Materials · doi:10.1016/j.dental.2011.07.011 · Cited by 143
Preparation of a bio-based epoxy with comparable properties to those of petroleum-based counterparts
Liu, X. Q., Huang, W. Q., Jiang, Y., Zhu, J., & Zhang, C. Z. (2012) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2012.32 · Cited by 143
Aouf, C., Lecomte, J., Villeneuve, P., Dubreucq, É., & Fulcrand, H. (2012) · Green Chemistry · doi:10.1039/c2gc35558b · Cited by 140
Harvey, B. G., Guenthner, A. J., Lai, W., Meylemans, H. A., Davis, M. C., Cambrea, L. R., Reams, J. T., & Lamison, K. R. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00496 · Cited by 117
DMA testing of epoxy resins: The importance of dimensions
McAninch, I. M., Palmese, G. R., Lenhart, J. L., & Scala, J. J. L. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24167 · Cited by 95
Synthesis of Renewable Bisphenols from Creosol
Meylemans, H. A., Groshens, T. J., & Harvey, B. G. (2011) · ChemSusChem · doi:10.1002/cssc.201100402 · Cited by 95
Fast pyrolysis of Kraft lignin—Vapor cracking over various fixed-bed catalysts
Choi, H. S., & Meier, D. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.12.025 · Cited by 80
Cited by
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
Sun, Z., Fridrich, B., de Santi, A., Elangovan, S., & Barta, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00588 · Cited by 2,191
Bio-based polymers with performance-advantaged properties
Cywar, R. M., Rorrer, N. A., Hoyt, C. B., Beckham, G. T., & Chen, E. Y.-X. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00363-3 · Cited by 811
Liu, J., Wang, S., Peng, Y., Zhu, J., Zhao, W., & Liu, X. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101353 · Cited by 418
Miao, J.-T., Yuan, L., Guan, Q., Liang, G., & Gu, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01222 · Cited by 254
Metadata
- Authors
- Hernandez, E. D., Bassett, A. W., Sadler, J. M., La Scala, J. J., & Stanzione, J. F.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-07-18
- Volume
- 4
- Issue
- 8
- Pages
- 4328-4339
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2469197306
- Cited by
- 307
- References
- 34
- FWCI
- 32.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.