Control of PLA Stereoisomers-Based Polyurethane Elastomers as Highly Efficient Shape Memory Materials
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Poly(lactic acid) (PLA) has received increasing attention in the development of shape memory polymers (SMPs) due to its excellent physical properties and good biocompatibility. However, the intrinsically increased crystallinity of PLA at higher deformation ratios still remains a significant challenge, which remarkably restricts the chain mobility and reduces shape recovery efficiency. Being different from other types of biodegradable polymers, the diverse isomeric forms of PLA have provided great opportunities for modulation of PLA toward a favorable property by incorporating different PLA stereoisomers in one macromolecular architecture. In this paper, we report a completely amorphous PLA poly(ester urethane) elastomer that exhibits excellent shape fixity (>99%) and shape recovery (>99%) in a time frame of seconds. By means of adjusting the stereoisomeric ratios and control over architecture, the resultant poly(PLLA/PDLLA urethane)s (PLDU) elastomers show a single glass transition temperature ( T g ), as the only thermal event, in the range of 38–46 °C in a predictable manner. The elastic moduli of PLDU elastomers display a 100-fold loss during the sharp transition from a glassy to a rubbery state with temperature alternation across their corresponding T g, indicating a successful manipulation of the thermo-mechanical properties by temperature as required in thermally induced SMPs. In addition, all samples display a typical elastomeric behavior with elongation at break (ε b ) greater than 400%. The effect of the stereoisomer content on the tensile modulus and elastic mechanical behavior were also systematically investigated. Together with the prominent degradation property, the new PLDU elastomers developed in this study show great potential for biomedical applications as shape memory implants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
Electromagnetic activation of shape memory polymer networks containing magnetic nanoparticles
Schmidt, A. M. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600225 · Cited by 518
AB-polymer networks based on oligo(ɛ-caprolactone) segments showing shape-memory properties
Lendlein, A., Schmidt, A. M., & Langer, R. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.98.3.842 · Cited by 303
Water soluble polyhydroxyalkanoates: future materials for therapeutic applications
Li, Z., & Loh, X. J. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00089k · Cited by 291
Self-citationBiodegradable, Amorphous Copolyester‐Urethane Networks Having Shape‐Memory Properties
Alteheld, A., Feng, Y., Kelch, S., & Lendlein, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200461360 · Cited by 237
Liu, Y., Li, Y., Yang, G., Zheng, X., & Zhou, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5081056 · Cited by 214
Biodegradable Thermoplastic Polyurethanes Incorporating Polyhedral Oligosilsesquioxane
Knight, P. T., Lee, K. M., Qin, H., & Mather, P. T. (2008) · Biomacromolecules · doi:10.1021/bm8004935 · Cited by 141
Cited by
Advancements in CO2 capture by absorption and adsorption: A comprehensive review
Soo, X. Y. D., Lee, J. J. C., Wu, W.-Y., Tao, L., Wang, C., Zhu, Q., & Bu, J. (2024) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2024.102727 · Cited by 509
Shape‐Memory Polymers for Biomedical Applications
Delaey, J., Dubruel, P., & Van Vlierberghe, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909047 · Cited by 407
Biobased polyurethanes for biomedical applications
Wendels, S., & Avérous, L. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.002 · Cited by 379
Yeo, J. C. C., Muiruri, J. K., Thitsartarn, W., Li, Z., & He, C. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.11.006 · Cited by 343
Self-citationLi, Z., Muiruri, J. K., Thitsartarn, W., Zhang, X., Tan, B. H., & He, C. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.02.026 · Cited by 105
Self-citation
Metadata
- Authors
- Fan, X., Tan, B. H., Li, Z., & Loh, X. J.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-12
- Volume
- 5
- Issue
- 1
- Pages
- 1217-1227
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2560289202
- Cited by
- 123
- References
- 11
- FWCI
- 10.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Control of PLA Stereoisomers-Based Polyurethane Elastomers as Highly Efficient Shape Memory Materials. https://app.cochat.ai/papers/10.1021/acssuschemeng.6b02652
- The paper
- Fan, X., Tan, B. H., Li, Z., & Loh, X. J. (2017). Control of PLA Stereoisomers-Based Polyurethane Elastomers as Highly Efficient Shape Memory Materials. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.6b02652
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.