A Multitechnique Characterization of Lignin Softening and Pyrolysis
The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Abstract
The understanding of lignin softening and pyrolysis is important for developing lignocellulosic biorefinery in order to produce carbon fibers, polymers additives, green aromatics, or biofuels. Protobind lignin (produced by soda pulping of a wheat straw) was characterized by thermogravimetry, calorimetry (for glass transition temperature and heat of pyrolysis reactions), in situ 1 H NMR (for the analysis of the mobility of protons upon lignin thermal conversion), and solution-state 13 C and 31 P NMR (determination of functional groups in lignin). In situ rheology reveals the real-time viscoelastic behavior of lignin as a function of temperature. Upon heating, lignin undergoes softening, through glass transition overlapped with depolymerization, and is followed by the solidification of the softened material by cross-linking reactions. The lignin residues were quenched within the rheometer at the midpoint temperatures of softening and solidification regions and were further analyzed by elemental analysis, GPC-UV of acetylated THF soluble fractions, FTIR, solid 13 C NMR, and laser desorption ionization (LDI) combined with very high-resolution mass spectrometry (HRMS). We present the first report on lignin biochars analysis by LDI-HRMS. NMR and FTIR analyses provide the evolution of functional moieties in lignin residues. 13 C NMR, GPC-UV, and LDI FTICRMS analyses depict the depolymerization mechanism combined with cross-linking and demethoxylation reactions. An overall physical and chemical mechanism for the thermal conversion of alkali lignin is proposed based on these complementary analyses.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“With increasing temperature (over the softening temperature of lignin at ~ 140 °C [144]), the content of THF-insoluble fraction of obtained lignin char contains a larger molecular weight, indicating the occurrence of repolymerization reaction.”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [144]
Citations
Cites
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Modelling one‐ and two‐dimensional solid‐state NMR spectra
Massiot, D., Fayon, F., Capron, M., King, I., Le Calvé, S., Alonso, B., Durand, J., Bujoli, B., Gan, Z., & Hoatson, G. (2002) · Magnetic Resonance in Chemistry · doi:10.1002/mrc.984 · Cited by 4,279
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Characterization of chars from pyrolysis of lignin
Sharma, R. K., Wooten, J. B., Baliga, V. L., Lin, X., Geoffrey Chan, W., & Hajaligol, M. R. (2004) · Fuel · doi:10.1016/j.fuel.2003.11.015 · Cited by 946
Upgrading of lignin-derived bio-oils by catalytic hydrodeoxygenation
Saidi, M., Samimi, F., Karimipourfard, D., Nimmanwudipong, T., Gates, B. C., & Rahimpour, M. R. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43081b · Cited by 944
Holladay, J. E., White, J. F., Bozell, J. J., & Johnson, D. (2007) · doi:10.2172/921839 · Cited by 905
Constant, S., Wienk, H. L. J., Frissen, A. E., Peinder, P. D., Boelens, R., van Es, D. S., Grisel, R. J. H., Weckhuysen, B. M., Huijgen, W. J. J., Gosselink, R. J. A., et al. (2016) · Green Chemistry · doi:10.1039/c5gc03043a · Cited by 893
Song, Q., Wang, F., Cai, J., Wang, Y., Zhang, J., Yu, W., & Xu, J. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23741e · Cited by 891
Recent advances in low‐cost carbon fiber manufacture from lignin
Baker, D. A., & Rials, T. G. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39273 · Cited by 664
Characterization and analysis of the molecular weight of lignin for biorefining studies
Tolbert, A., Akinosho, H., Khunsupat, R., Naskar, A. K., & Ragauskas, A. J. (2014) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1500 · Cited by 504
Research works printed but not linked: 2
- Koullas D. P., 2006, Cellul. Chem. Technol., 40, 9
- Ghislain, T.; Carré, V.; Le Brech, Y.; Mauviel, G.; Dufour, A.; Aubriet, F.Proceedings from the62nd ASMS Conference on Mass Spectrometry and Allied Topics, June 15–19, 2014, Baltimore, Maryland;ASMS:Santa Fe, NM, 2014.
Cited by
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Wang, W., Lemaire, R., Bensakhria, A., & Luart, D. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105479 · Cited by 429
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
“With increasing temperature (over the softening temperature of lignin at ~ 140 °C [144]), the content of THF-insoluble fraction of obtained lignin char contains a larger molecular weight, indicating the occurrence of repolymerization reaction.”
BackgroundFacile Extraction of Wheat Straw by Deep Eutectic Solvent (DES) to Produce Lignin Nanoparticles
Lou, R., Ma, R., Lin, K.-T., Ahamed, A., & Zhang, X. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05816 · Cited by 205
Yamakawa, C. K., Qin, F., & Mussatto, S. I. (2018) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2018.09.007 · Cited by 179
Bamboo flattening technique: a literature and patent review
Lou, Z., Wang, Q., Sun, W. G., Zhao, Y., Wang, X., Liu, X., & Li, Y. (2021) · European Journal of Wood and Wood Products · doi:10.1007/s00107-021-01722-1 · Cited by 160
Prospects for the integration of lignin materials into the circular economy
Tardy, B. L., Lizundia, E., Guizani, C., Hakkarainen, M., & Sipponen, M. H. (2023) · Materials Today · doi:10.1016/j.mattod.2023.04.001 · Cited by 153
Rodriguez Correa, C., Hehr, T., Voglhuber-Slavinsky, A., Rauscher, Y., & Kruse, A. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.03.007 · Cited by 141
Comprehensive mechanism of initial stage for lignin pyrolysis
Li, J., Bai, X., Fang, Y., Chen, Y., Wang, X., Chen, H., & Yang, H. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.01.016 · Cited by 127
Biobased Polyurethane Coatings with High Biomass Content: Tailored Properties by Lignin Selection
de Haro, J. C., Allegretti, C., Smit, A. T., Turri, S., D’Arrigo, P., & Griffini, G. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01873 · Cited by 124
Fabrication and characterization of carbon foams using 100% Kraft lignin
Yan, Q., Arango, R. A., Li, J., & Cai, Z. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109460 · Cited by 83
A Review on Lignin Liquefaction: Advanced Characterization of Structure and Microkinetic Modeling
Terrell, E., Dellon, L. D., Dufour, A., Bartolomei, E., Broadbelt, L. J., & Garcia-Perez, M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05744 · Cited by 71
Self-citationOrdoñez-Loza, J., Chejne, F., Jameel, A. G. A., Telalović, S., Amell, A., & Sarathy, S. M. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106144 · Cited by 73
The glass transition temperature of isolated native, residual, and technical lignin
Henrik-Klemens, Å., Caputo, F., Ghaffari, R., Westman, G., Edlund, U., Olsson, L., & Larsson, A. (2024) · Holzforschung · doi:10.1515/hf-2023-0111 · Cited by 73
Fast pyrolysis of tannins from pine bark as a renewable source of catechols
Pinto, O., Romero, R., Carrier, M., Appelt, J., & Segura, C. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.10.022 · Cited by 63
Characterization of lignin at pre-pyrolysis temperature to investigate its melting problem
Han, T., Sophonrat, N., Tagami, A., Sevastyanova, O., Mellin, P., & Yang, W. (2018) · Fuel · doi:10.1016/j.fuel.2018.08.120 · Cited by 57
Improving fast pyrolysis of lignin using three additives with different modes of action
Ghysels, S., Dubuisson, B., Pala, M., Rohrbach, L., den Bulcke, J. V., Heeres, H. J., & Ronsse, F. (2020) · Green Chemistry · doi:10.1039/d0gc02417a · Cited by 48
Mankar, A. R., Modak, A., & Pant, K. K. (2021) · Advanced Sustainable Systems · doi:10.1002/adsu.202100299 · Cited by 52
Terrell, E., & Garcìa-Pèrez, M. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01687 · Cited by 49
Fast Pyrolysis of Hydrolysis Lignin in Fluidized Bed Reactors
Pienihäkkinen, E., Lindfors, C., Ohra‐aho, T., Lehtonen, J. S., Granström, T. B., Yamamoto, M., & Oasmaa, A. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01719 · Cited by 47
Toloue Farrokh, N., Suopajärvi, H., Mattila, O., Umeki, K., Phounglamcheik, A., Romar, H., Sulasalmi, P., & Fabritius, T. (2018) · Energy · doi:10.1016/j.energy.2018.08.161 · Cited by 43
Terrell, E., Carré, V., Dufour, A., Aubriet, F., Brech, Y. L., & Garcìa-Pèrez, M. (2020) · ChemSusChem · doi:10.1002/cssc.202000239 · Cited by 46
Self-citationInfluence of additives on lignin agglomeration and pyrolysis behavior
Li, J., Bai, X., Dong, Z., Chen, Y., Yang, H., Wang, X., & Chen, H. (2020) · Fuel · doi:10.1016/j.fuel.2019.116629 · Cited by 41
Lignin Depolymerization: A Comparison of Methods to Analyze Monomers and Oligomers
Bartolomei, E., Brech, Y. L., Dufour, A., Carré, V., Aubriet, F., Terrell, E., Garcìa-Pèrez, M., & Arnoux, P. (2020) · ChemSusChem · doi:10.1002/cssc.202001126 · Cited by 42
Self-citationTechnology Overview of Fast Pyrolysis of Lignin: Current State and Potential for Scale‐Up
Singh‐Morgan, A., Puente-Urbina, A. A., & van Bokhoven, J. A. (2022) · ChemSusChem · doi:10.1002/cssc.202200343 · Cited by 40
A novel solar powered biomass pyrolysis reactor for producing fuels and chemicals
Rony, A. H., Mosiman, D. S., Sun, Z. L., Qin, D., Zheng, Y. F., Boman, J. H., & Fan, M. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.03.020 · Cited by 38
Dong, Z., Yang, H., Liu, Z., Chen, P., Chen, Y., Wang, X., & Chen, H. (2021) · Fuel · doi:10.1016/j.fuel.2021.121237 · Cited by 36
Lignin catalytic hydroconversion in a semi-continuous reactor: An experimental study
Pu, J., Nguyen, T., Leclerc, E., Lorentz, C., Laurenti, D., Pitault, I., Tayakout‐Fayolle, M., & Geantet, C. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.117769 · Cited by 32
Structural changes of chars produced from fast pyrolysis of lignin at 100–300 °C
Chua, Y. W., Yu, Y., & Wu, H. (2019) · Fuel · doi:10.1016/j.fuel.2019.115754 · Cited by 31
Guizani, C., Trogen, M., Zahra, H., Pitkänen, L., Moriam, K., Rissanen, M., Mäkelä, M., Sixta, H., & Hummel, M. (2021) · Cellulose · doi:10.1007/s10570-021-03923-6 · Cited by 29
Bortoluz, J., Cemin, A., Bonetto, L. R., Ferrarini, F., Esteves, V. I., & Giovanela, M. (2019) · Cellulose · doi:10.1007/s10570-019-02399-9 · Cited by 27
Bartolomei, E., Brech, Y. L., Gadiou, R., Bertaud, F., Leclerc, S., Vidal, L., Meins, J. L., & Dufour, A. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c02704 · Cited by 29
Self-citationRollag, S. A., Jeong, K., Peterson, C. A., Kim, K. H., & Brown, R. C. (2022) · Green Chemistry · doi:10.1039/d1gc04837f · Cited by 25
Hydrothermal carbonization of industrial kraft lignin: Assessment of operational parameters
Salcedo-Puerto, O., Sermyagina, E., Mendoza-Martinez, C., Saari, J., & Vakkilainen, E. K. (2024) · Fuel · doi:10.1016/j.fuel.2024.132389 · Cited by 24
Li, J., Li, S., Dong, Z., Gong, M., Chen, Y., Yang, H., & Chen, H. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01921 · Cited by 23
Jiang, Y., Feng, Y., Lei, B., & Zhong, H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.318 · Cited by 24
Jalalabadi, T., Drewery, M., Tremain, P., Wilkinson, J., Moghtaderi, B., & Allen, J. A. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se01031f · Cited by 23
Tian, Y., & Perré, P. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4232502 · Cited by 26
How to make furfural and HMF production greener? Lessons from life cycle assessments
He, O., Smith, B. A., Champagne, P., Jessop, P. G., & Yu, H. (2025) · Green Chemistry · doi:10.1039/d5gc03729h · Cited by 23
Zheng, Q., Li, Z., Guo, T., Fan, Q., Hu, S., Xiang, J. H., & Fu, P. (2023) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2023.105912 · Cited by 21
Evaluating the potential of a novel hardwood biomass using a superbase ionic liquid
Muazzam, R., Asim, A. M., Uroos, M., Muhammad, N., & Hallett, J. P. (2021) · RSC Advances · doi:10.1039/d1ra01328a · Cited by 26
Mystifications and misconceptions of lignin: revisiting understandings
Souto, F., & Calado, V. M. D. A. (2022) · Green Chemistry · doi:10.1039/d2gc01914k · Cited by 23
Guizani, C., Sorsa, O., Siipola, V., Ohra‐aho, T., Paalijärvi, R., Pasanen, A., Mäkelä, M., Kalliola, A., Vilkman, M., & Torvinen, K. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-04373-9 · Cited by 23
Qi, Y., & Volmer, D. A. (2018) · Rapid Communications in Mass Spectrometry · doi:10.1002/rcm.8254 · Cited by 20
On the Design of Novel Biofoams Using Lignin, Wheat Straw, and Sugar Beet Pulp as Precursor Material
Gupta, S., Dey, M., Javaid, S., Ji, Y., & Payne, S. A. (2020) · ACS Omega · doi:10.1021/acsomega.0c00721 · Cited by 20
Lignin from Bioethanol Production as a Part of a Raw Material Blend of a Metallurgical Coke
Koskela, A., Suopajärvi, H., Mattila, O., Uusitalo, J., & Fabritius, T. M. J. (2019) · Energies · doi:10.3390/en12081533 · Cited by 19
Sander, K., Dütsch, L., Bremer, M., Fischer, S., Vogt, C., & Zuber, J. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c03538 · Cited by 18
Terrell, E., & Garcìa-Pèrez, M. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c02928 · Cited by 21
Wang, H., Han, H., Sun, E., Han, Y., Zhang, Y., Li, J., Chen, Y., Song, H. L., Zhao, H., & Kang, Y. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00755 · Cited by 17
Production of Fuel Range Hydrocarbons from Pyrolysis of Lignin over Zeolite Y, Hydrogen
Ali, G., Afraz, M., Muhammad, F., Nisar, J., Shah, A., Munir, S., & Hussain, S. T. (2022) · Energies · doi:10.3390/en16010215 · Cited by 16
Plasma-based ozonolysis of lignin waste materials for the production of value-added chemicals
Muazzam, R., Hafeez, A., Uroos, M., SAEED, M. K., Rehman, F., & Muhammad, N. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-021-01707-3 · Cited by 16
Effect of oxygen on the temperatures and conversion of tobacco in an electrically heated system
Bechikhi, M., Quilès, F., Lainé, R., Brech, Y. L., & Dufour, A. (2023) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2023.106312 · Cited by 14
Self-citationEffect of Solvents on Lignin–Surface Interactions via Molecular Dynamics Simulations
Rajbangshi, J., Sener, C., & Lehn, R. C. V. (2025) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5c02943 · Cited by 13
Global insights into biomass pyrolysis mechanisms: A scientometric and mechanistic approach
Abioye, K. J., Falua, K. J., Rezaee, M., Zamiri, M. A., Zou, F., & Acharya, B. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.107123 · Cited by 16
Kinetic, products and shrinkage for the pyrolysis of flax fibers
Dhahak, A., Cézard, L., Baumberger, S., & Peixinho, J. (2024) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2024.106538 · Cited by 12
Zhang, J., & Huang, X. (2025) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2025.107451 · Cited by 14
Chua, Y. W., Wu, H., & Yu, Y. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b02813 · Cited by 12
Riddell, L. A., Lindner, J.-P. B., de Peinder, P., Meirer, F., & Bruijnincx, P. C. A. (2024) · ChemSusChem · doi:10.1002/cssc.202301464 · Cited by 11
Carbon dots inspired upgradable hierarchical carbon for enhanced tetracycline adsorption
Yang, C., Su, Y., & Zhang, H. (2025) · Carbon · doi:10.1016/j.carbon.2025.120595 · Cited by 10
Mechanisms of Low-Temperature Processes of Biomass Conversion (A Review)
Kulikova, M. V., Krylova, A. Y., Krysanova, K. O., Kulikov, A. B., & Maximov, A. L. (2023) · Petroleum Chemistry · doi:10.1134/s0965544123040011 · Cited by 11
A comprehensive in-situ analysis of lignin softening and pyrolysis mechanism
Dong, Z., Yang, H., Lainé, R., Leclerc, S., Chen, L., Hua, D., & Chen, H. (2024) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2024.105603 · Cited by 10
Self-citationLy, T. B., Nguyen, D. D. B., Trinh, A. M. H., Tran, N. T. T., Truong, T. H., Le, K. A., Le, H. V., & Le, P. K. (2024) · Bioresource Technology · doi:10.1016/j.biortech.2024.132025 · Cited by 10
Solihat, N. N., Hermiati, E., & Adi, D. T. N. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/935/1/012046 · Cited by 10
Pilot scale fast pyrolysis of lignin in a twin-screw reactor
de Araujo, A. C. C., Funke, A., Margellou, A. G., Triantafyllidis, K. S., & Dahmen, N. (2025) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2025.108041 · Cited by 11
Xiang, D., Shen, F., Jiang, X., An, H., Zheng, H., & Gao, Q. (2021) · ACS Omega · doi:10.1021/acsomega.0c05052 · Cited by 9
Dong, Z., Dufour, A., Lainé, R., Leclerc, S., Jia, L., Chen, Y., Wang, X., Chen, H., & Yang, H. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2022.107390 · Cited by 9
Self-citationYang, W., Tóth, P., Song, Y. Q., & Li, W. (2022) · Thermochimica Acta · doi:10.1016/j.tca.2022.179230 · Cited by 9
Zhang, J., Ke, L., Wu, Q., Fan, L., Cobb, K., Ruan, R. R., & Wang, Y. (2025) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2025.107084 · Cited by 8
Ishimaru, H., Yoshikawa, T., Higuchi, Y., Nakasaka, Y., Yoshida, A., Sonoki, T., & Masuda, T. (2023) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2023.105009 · Cited by 8
Riddell, L. A., de Peinder, P., Lindner, J.-P. B., Meirer, F., & Bruijnincx, P. C. A. (2025) · Nature Protocols · doi:10.1038/s41596-025-01139-7 · Cited by 8
Fast Pyrolysis of Lignin Pretreated with Magnesium Formate and Magnesium Hydroxide
Patel, M., Hill, N., Mullen, C. A., Gunukula, S., & DeSisto, W. J. (2020) · Energies · doi:10.3390/en13194995 · Cited by 7
Effect of Solvent on the Interaction of Lignin with a Zeolite Nanosheet in the Condensed Phase
Huda, M. M., & Rai, N. (2023) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.3c02085 · Cited by 7
Gao, Y., Ji, R., Ren, Z., Jiang, Z., Xu, S., & Matharu, A. S. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c07767 · Cited by 6
Synthesis and characterization of novel foams by pyrolysis of lignin
Gupta, S., Dey, M., Matzke, C., Ellis, G., Javaid, S., Hall, K., Ji, Y., & Payne, S. A. (2019) · TAPPI Journal · doi:10.32964/tj18.1.45 · Cited by 6
Chen, Y., Fang, F., Abbel, R., Patel, M., & Parker, K. (2021) · Sensors · doi:10.3390/s21051911 · Cited by 6
Xiao, T., Song, J., Jia, W., Sun, Y., Guo, Y., Fatehi, P., & Shi, H. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.142643 · Cited by 5
Steam explosion-treated mushroom substrate for robust and water-resistant wood composites
Wang, Z., Li, J., Wang, P., Liu, T., Bushra, R., Guo, J., Zhu, W., Khan, M. R., Cao, H., Xiao, H., et al. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e00992 · Cited by 8
Role of sodium sulfate in electrical conductivity and structure of lignin-derived carbons
Kane, S., Hodge, D. B., Saulnier, B. K., Bécsy-Jakab, V. E., Dülger, D. N., & Ryan, C. A. (2024) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2024.106600 · Cited by 5
Pyrolysis characteristics and kinetics of typical Chinese herbal medicine residues
Zhang, J., Cao, R., You, M., Liu, Y., & Han, K. (2026) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2026.109010 · Cited by 5
Properties evolutions during carbonization of carbon foam using lignin as sole precursor
Liang, C., Chen, W., Yin, L., Wu, X., Xu, J., Du, C., & Qu, W. (2024) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2024.10.013 · Cited by 4
Jang, M., Park, J. E., Choi, J., & Kim, S. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c08229 · Cited by 4
Deng, H., Zhang, D., Li, X., Shi, J., Zhang, Y., & Xu, W. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.119999 · Cited by 4
A STUDY OF CELLULOSE AND LIGNIN EXTRACTED FROM SĀNCI BARK AND THEIR MODIFICATION
Ali, A. A., Mazumdar, S., & Dutta, R. K. (2023) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2023.57.63 · Cited by 4
Pauls, G., Sorsa, O., Paajanen, A., Modi, V., Leclerc, S., Bouizi, Y., Dufour, A., Kalliola, A., & Guizani, C. (2026) · Bioresource Technology · doi:10.1016/j.biortech.2026.134177 · Cited by 4
Self-citationSynthesis of ternary ceramics (Cr 2 AlC) by using biochars
Dey, M., Mahmoodi, N. Z., Javaid, S., Matzke, C., & Gupta, S. (2021) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13969 · Cited by 3
Wang, F., Zhang, Y., Su, Y., Zhang, D., Xia, N., Sun, Y., & Liu, Y. (2021) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2021.2015388 · Cited by 3
Continuous Fabrication of Strong, Scalable, High-Yield, and Sustainable Materials from Aspen
Rafi, A. A., Nyström, S. K., Shamirza, N., Bartocci, P., Karpenja, T., Garcia-Lindgren, C., Engstrand, P., & Córdova, A. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c10377 · Cited by 2
Kraft Lignin-Based Polyurethane with GVL: A Sustainable Coating Alternative for Recycled Linerboard
Figueiredo, J. D. C., Lelis, R. C. C., Castro, R., Gomes, F. J. B., Redmond, E. F. A., & Bujanovic, B. (2025) · Polymers · doi:10.3390/polym18010118 · Cited by 2
Zhao, X., Chen, C., Zhao, S., Wang, L., Jiang, M., & Yang, R. (2026) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2026.107693 · Cited by 2
How to Reduce Char Formation in the Lignin Degradation Process: A Review
Ma, J., Ma, X., Li, M., Sun, Y., & Wang, T. (2023) · ChemistrySelect · doi:10.1002/slct.202204655 · Cited by 3
The effect of temperature and reaction time on lignin content of Imperata Cylindrica
Riyadi, R., Masyithah, Z., Hutagalung, A., & Haryanto, B. (2021) · AIP conference proceedings · doi:10.1063/5.0045368 · Cited by 2
Krysanova, K. O., Krylova, A. Y., Pudova, Y. D., & Зайченко, В. М. (2023) · Solid Fuel Chemistry · doi:10.3103/s0361521923040055 · Cited by 1
Figueiredo, J. D. C., Gomes, F. J. B., Redmond, E. F. A., Bujanovic, B., Lelis, R. C. C., Santana, M. F., & Mickles, C. (2026) · Polymers · doi:10.3390/polym18070787 · Cited by 1
Development Of Technologies For High Value Products From Biomass Pyrolysis
Barbiero, C. (2020) · Scholarship@Western (Western University) · Cited by 2
Ge, Y., Lyu, J., Li, X., Hao, X., Qiao, J., Wu, Y., Wu, Y., & Li, X. (2025) · European Journal of Wood and Wood Products · doi:10.1007/s00107-025-02200-8 · Cited by 1
[Symposium: the role of laboratory medicine in modern medical care--chairman's remarks].
MIYAI, K., & Nakano, H. (1992) · PubMed
Lou, Z., Li, Y., & Zhao, Y. (2023) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-99-0232-3_7
Métodos inovadores de hidrofobização de celulose fibrilada
Marotti, B. D. S. (2022) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.97.2022.tde-19072023-112233
Metadata
- Authors
- Shrestha, B., le Brech, Y., Ghislain, T., Leclerc, S., Carré, V., Aubriet, F., Hoppe, S., Marchal, P., Pontvianne, S., Brosse, N., & Dufour, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- LRGP, CNRS, Université de Lorraine, ENSIC, 1 rue Grandville 54000 Nancy, France
- Laboratoire de Chimie et Physique - Approche Multi-échelle des Milieux Complexes (FR)
- Laboratoire d'Etudes et de Recherche sur le Matériau Bois (FR)
- Corresponding author
- Dufour, Anthony
- ORCID
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-18
- Volume
- 5
- Issue
- 8
- Pages
- 6940-6949
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2643703840
- Cited by
- 108
- References
- 66
- Citations by year
- 2026: 10 · 2025: 14 · 2024: 10 · 2023: 12 · 2022: 11 · 2021: 18 · 2020: 13 · 2019: 13 · 2018: 6
- FWCI
- 3.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion)
- HAL (submittedVersion)
- Funders
- Agence Nationale de la Recherche (ANR-11BS09-003)
- European Regional Development Fund
- Centre National de la Recherche Scientifique
- R?gion Lorraine
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Keywords
- lignin pyrolysis, soda pulping, wheat straw, alkali lignin, depolymerization mechanism, crosslinking, demethoxylation, glass transition, in situ rheology, in situ NMR, lignin functional groups, lignocellulosic biorefinery
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.