High-Performance Oxygen Evolution Anode from Stainless Steel via Controlled Surface Oxidation and Cr Removal
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Improving the water oxidation performance of abundantly available materials, such as stainless steel (SS), with notable intrinsic electrocatalytic oxygen evolution reaction (OER) activity due to the presence of Ni and Fe is highly anticipated in water splitting. A new method for promoting the corrosion of stainless steel (304) was found which assisted the uniform formation of oxygen evolution reaction (OER) enhancing NiO incorporated Fe 2 O 3 nanocrystals with the simultaneous reduction in the surface distribution of OER inactive Cr. An equimolar combination of KOH and hypochlorite was used as the corroding agent at 180 °C. The effect of corrosion time on the OER activity was studied and found that better water oxidation performance was observed when the corrosion time was 12 h (SS-12). The SS-12 showed an abnormal enhancement in OER activity compared to the untreated SS and other optimized versions of the same by requiring very low overpotentials of 260, 302, and 340 mV at the current densities of 10, 100, and 500 mA cm –2 along with a very low Tafel slope in the range of 35.6 to 43.5 mV dec –1 . These numbers have certainly shown the high-performance electrocatalytic water oxidizing ability of SS-12. The comparative study revealed that the state-of-the-art IrO 2 had failed to compete with our performance improved catalytic water oxidation anode “the SS-12”. This fruitful finding indicates that the SS-12 has the potential to be an alternate anode material to precious IrO 2 /RuO 2 for alkaline water electrolyzers in future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shi, Y., & Zhang, B. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00434a · Cited by 3,253
Anantharaj, S., Ede, S. R., Sakthikumar, K., Karthick, K., Mishra, S., & Kundu, S. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b02479 · Cited by 2,503
Self-citationDevelopments and perspectives of oxide-based catalysts for the oxygen evolution reaction
Fabbri, E., Habereder, A., Waltar, K., Kötz, R., & Schmidt, T. J. (2014) · Catal. Sci. Technol. · doi:10.1039/c4cy00669k · Cited by 1,303
NixCo3−xO4 Nanowire Arrays for Electrocatalytic Oxygen Evolution
Li, Y., Hasin, P., & Wu, Y. (2010) · Advanced Materials · doi:10.1002/adma.200903896 · Cited by 894
Zhuo, J., Cabán-Acevedo, M., Liang, H., Samad, L., Ding, Q., Fu, Y., Li, M., & Jin, S. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b01657 · Cited by 280
Anantharaj, S., Karthik, P. E., Subramanian, B., & Kundu, S. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b00965 · Cited by 244
Self-citation
Cited by
Chatenet, M., Pollet, B. G., Dekel, D. R., Dionigi, F., Deseure, J., Millet, P., Braatz, R. D., Bazant, M. Z., Eikerling, M., Staffell, I., et al. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01079k · Cited by 2,025
Anantharaj, S., Ede, S. R., Karthick, K., Sam Sankar, S., Sangeetha, K., Karthik, P. E., & Kundu, S. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03457a · Cited by 1,632
Self-citationAmorphous Catalysts and Electrochemical Water Splitting: An Untold Story of Harmony
Anantharaj, S., & Noda, S. (2020) · Small · doi:10.1002/smll.201905779 · Cited by 681
Self-citationNickel selenides as pre-catalysts for electrochemical oxygen evolution reaction: A review
Anantharaj, S., & Noda, S. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.04.073 · Cited by 187
Self-citation
Metadata
- Authors
- Anantharaj, S., Venkatesh, M., Salunke, A. S., Simha, T. V. S. V., Prabu, V., & Kundu, S.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-10-05
- Volume
- 5
- Issue
- 11
- Pages
- 10072-10083
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2759893893
- Cited by
- 127
- References
- 6
- FWCI
- 2.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.