The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
Moisture and Oxygen Barrier Properties of Cellulose Nanomaterial-Based Films
Abstract
Applications of cellulose nanomaterials (CNMs) have attracted increasing attention in recent years. One conceivable path lies in their commercial applications for packaging, in which their barrier properties will play an important role in determining their competiveness with conventional materials. This review critically analyzes the performance of CNMs acting as a barrier against moisture and oxygen permeation in CNM films, CNM-coated polymers and papers, and CNM-reinforced polymer composites, gives some insights into remaining challenges, and brings an overall perspective of compositing CNMs with other materials to achieve balanced properties adequate for barrier packaging. In general, CNMs are a poor moisture barrier but excellent oxygen barrier in the dry state and are still good below 65% relative humidity. The addition of CNMs can improve the oxygen barrier of the resulting polymer composites; however, neat CNM coatings and films can afford better oxygen barrier properties than dispersed CNMs in coatings and nanocomposites. The morphology and surface functionality of CNMs can be tailored to maximize the barrier performance of materials comprising them. The higher the surface charge density is of CNMs, the better is the barrier performance of coated polymers. Like other oxygen barriers such as ethylene vinyl alcohol and cellophane, the moisture sensitivity and sealability of CNMs can be improved by sandwiching them with high moisture-resistant and sealable polymers such as a polyolefin. A multilayered structure with layers of CNMs providing oxygen resistance covered by other layers of polymers providing moisture resistance and sealability might be competitive in barrier packaging markets dominated by synthetic plastics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Visualization of Cellulose Synthase Demonstrates Functional Association with Microtubules
Paredez, A. R., Somerville, C. R., & Ehrhardt, D. W. (2006) · Science · doi:10.1126/science.1126551 · Cited by 1,371
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Modeling the Barrier Properties of Polymer-Layered Silicate Nanocomposites
Bharadwaj, R. K. (2001) · Macromolecules · doi:10.1021/ma010780b · Cited by 1,128
Structure formation of regenerated cellulose materials from NMMO-solutions
Fink, H.-P., Weigel, P., Purz, H. J., & Ganster, J. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00025-9 · Cited by 1,025
Bugnicourt, E., Cinelli, P., Lazzeri, A., & Alvarez, V. (2014) · Express Polymer Letters · doi:10.3144/expresspolymlett.2014.82 · Cited by 943
Edible Coatings and Films to Improve Food Quality
Park, H. (1995) · Trends in Food Science & Technology · doi:10.1016/s0924-2244(00)88935-9 · Cited by 880
Recent innovations in barrier technologies for plastic packaging—a review
Lange, J., & Wyser, Y. (2003) · Packaging Technology and Science · doi:10.1002/pts.621 · Cited by 842
Oxygen and oil barrier properties of microfibrillated cellulose films and coatings
Aulin, C., Gällstedt, M., & Lindström, T. (2010) · Cellulose · doi:10.1007/s10570-009-9393-y · Cited by 749
Nanofibrillated Cellulose Surface Modification: A Review
Missoum, K., Belgacem, M., & Bras, J. (2013) · Materials · doi:10.3390/ma6051745 · Cited by 658
Application of bioplastics for food packaging
Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2013.06.003 · Cited by 615
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Strength and barrier properties of MFC films
Syverud, K., & Stenius, P. (2009) · Cellulose · doi:10.1007/s10570-008-9244-2 · Cited by 592
Sustainable Films and Coatings from Hemicelluloses: A Review
Hansen, N. M. L., & Plackett, D. (2008) · Biomacromolecules · doi:10.1021/bm800053z · Cited by 529
Adhesion and Surface Issues in Cellulose and Nanocellulose
Gardner, D. J., Oporto, G. S., Mills, R., & Samir, M. A. S. A. (2008) · Journal of Adhesion Science and Technology · doi:10.1163/156856108x295509 · Cited by 525
Self-citationNanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review
Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. J. (2017) · BioResources · doi:10.15376/biores.12.1.2143-2233 · Cited by 508
Evidence for Egg-Box-Compatible Interactions in Calcium−Alginate Gels from Fiber X-ray Diffraction
Sikorski, P., Mo, F., Skjåk-Bræk, G., & Stokke, B. T. (2007) · Biomacromolecules · doi:10.1021/bm0701503 · Cited by 503
Fortunati, E., Peltzer, M., Armentano, I., Torre, L., Jiménez, A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.025 · Cited by 494
Fujisawa, S., Okita, Y., Fukuzumi, H., Saito, T., & Isogai, A. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.029 · Cited by 457
Clay Nanopaper with Tough Cellulose Nanofiber Matrix for Fire Retardancy and Gas Barrier Functions
Liu, A., Walther, A., Ikkala, O., Belova, L., & Berglund, L. A. (2011) · Biomacromolecules · doi:10.1021/bm101296z · Cited by 412
Selection of barrier materials from molecular structure
Lee, W. M. (1980) · Polymer Engineering and Science · doi:10.1002/pen.760200111 · Cited by 401
Bio-Based Coatings for Paper Applications
Rastogi, V., & Samyn, P. (2015) · Coatings · doi:10.3390/coatings5040887 · Cited by 397
Chemical Coupling in Wood Fiber and Polymer Composites: A Review of Coupling Agents and Treatments
Lu, J. Z., Wu, Q., & McNabb, H. S. J. (2000) · Wood and Fiber Science (Society of Wood Science and Technology) · Cited by 395
Water sorption behavior and gas barrier properties of cellulose whiskers and microfibrils films
Belbekhouche, S., Bras, J., Siqueira, G., Chappey, C., Lebrun, L., Khelifi, B., Marais, S., & Dufresne, A. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.036 · Cited by 394
Structure, mechanical and barrier properties of amylose and amylopectin films
Rindlav-Westling, A., Stading, M., Hermansson, A.-M., & Gatenholm, P. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(98)00025-3 · Cited by 390
Nanocellulose in packaging: Advances in barrier layer technologies
Ferrer, A., Pal, L., & Hubbe, M. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.012 · Cited by 382
High performance green barriers based on nanocellulose
Nair, S. S., Zhu, J., Deng, Y., & Ragauskas, A. J. (2014) · Sustainable Chemical Processes · doi:10.1186/s40508-014-0023-0 · Cited by 368
Bras, J., Hassan, M. L., Bruzesse, C., Hassan, E. A., El-Wakil, N. A., & Dufresne, A. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.07.018 · Cited by 366
Structural characteristics defining high barrier properties in polymeric materials
Lagaron, J. M., Catalá, R., & Gavara, R. (2004) · Materials Science and Technology · doi:10.1179/026708304225010442 · Cited by 358
Poly(vinyl alcohol)/cellulose nanocrystal barrier membranes
Paralikar, S. A., Simonsen, J., & Lombardi, J. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.04.009 · Cited by 349
Spence, K. L., Venditti, R. A., Rojas, O. J., Habibi, Y., & Pawlak, J. J. (2010) · Cellulose · doi:10.1007/s10570-010-9424-8 · Cited by 337
A Fast Method to Produce Strong NFC Films as a Platform for Barrier and Functional Materials
Österberg, M., Vartiainen, J., Lucenius, J., Hippi, U., Seppälä, J., Serimaa, R., & Laine, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401046x · Cited by 336
Chitosan Film Mechanical and Permeation Properties as Affected by Acid, Plasticizer, and Storage
Caner, C., Vergano, P. J., & Wiles, J. L. (1998) · Journal of Food Science · doi:10.1111/j.1365-2621.1998.tb15852.x · Cited by 330
PLA-PHB/cellulose based films: Mechanical, barrier and disintegration properties
Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J., & Kenny, J. M. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.05.010 · Cited by 325
Structure and properties of cellulose nanocomposite films containing melamine formaldehyde
Henriksson, M., & Berglund, L. A. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26946 · Cited by 318
Rodionova, G., Lenes, M., Eriksen, Ø., & Gregersen, Ø. (2011) · Cellulose · doi:10.1007/s10570-010-9474-y · Cited by 313
A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches
Qing, Y., Sabo, R., Zhu, J. Y., Agarwal, U., Cai, Z., & Wu, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.086 · Cited by 311
Self-citationAbdul Khalil, H. P. S., Davoudpour, Y., Saurabh, C. K., Hossain, M. S., Adnan, A. S., Dungani, R., Paridah, M. T., Islam Sarker, M. Z., Fazita, M. R. N., Syakir, M. I., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.072 · Cited by 306
Ultrastrong and High Gas-Barrier Nanocellulose/Clay-Layered Composites
Wu, C.-N., Saito, T., Fujisawa, S., Fukuzumi, H., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm300465d · Cited by 303
Song, Z., Xiao, H., & Zhao, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.049 · Cited by 298
Gontard, N., Thibault, R., Cuq, B., et al. (1996) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf9504327 · Cited by 285
The Wiley encyclopedia of packaging technology
(2010) · Choice Reviews Online · doi:10.5860/choice.47-6003 · Cited by 283
Permeability of polymers in protective organic coatings
Sangaj, N. S., & Malshe, V. C. (2004) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2003.09.015 · Cited by 270
Sun, B., Hou, Q., Liu, Z., & Ni, Y. (2015) · Cellulose · doi:10.1007/s10570-015-0575-5 · Cited by 268
Overview of Cellulose Nanomaterials, Their Capabilities and Applications
Moon, R. J., Schueneman, G. T., & Simonsen, J. (2016) · JOM · doi:10.1007/s11837-016-2018-7 · Cited by 263
Aulin, C., Salazar-Alvarez, G., & Lindström, T. (2012) · Nanoscale · doi:10.1039/c2nr31726e · Cited by 260
Influence of TEMPO-oxidized cellulose nanofibril length on film properties
Fukuzumi, H., Saito, T., & Isogai, A. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.04.069 · Cited by 258
Brodin, F. W., Gregersen, Ø. W., & Syverud, K. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p156-166 · Cited by 256
Encyclopedia of Agriculture and Food Systems
(2014) · Elsevier eBooks · doi:10.1016/c2009-0-03584-3 · Cited by 241
A facile route to prepare cellulose-based films
Xu, Q., Chen, C., Rosswurm, K., Yao, T., & Janaswamy, S. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.114 · Cited by 231
Shimizu, M., Saito, T., & Isogai, A. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.11.002 · Cited by 229
Espino-Pérez, E., Bras, J., Ducruet, V., Guinault, A., Dufresne, A., & Domenek, S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.017 · Cited by 222
Reduced water vapour sorption in cellulose nanocomposites with starch matrix
Svagan, A. J., Hedenqvist, M. S., & Berglund, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.11.016 · Cited by 212
Fortunati, E., Puglia, D., Luzi, F., Santulli, C., Kenny, J. M., & Torre, L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.075 · Cited by 212
Comparison of nano- and microfibrillated cellulose films
Kumar, V., Bollström, R., Yang, A., Chen, Q., Chen, G., Salminen, P., Bousfield, D., & Toivakka, M. (2014) · Cellulose · doi:10.1007/s10570-014-0357-5 · Cited by 201
Self-citationEfficient approach to high barrier packaging using microfibrillar cellulose and shellac
Hult, E.-L., Iotti, M., & Lenes, M. (2010) · Cellulose · doi:10.1007/s10570-010-9408-8 · Cited by 200
Péroval, C., Debeaufort, F., Despré, D., & Voilley, A. (2002) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf0116449 · Cited by 200
Water vapor transport properties of regenerated cellulose and nanofibrillated cellulose films
Bedane, A. H., Eić, M., Farmahini-Farahani, M., & Xiao, H. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.06.009 · Cited by 195
Siró, I., Plackett, D., Hedenqvist, M., Ankerfors, M., & Lindström, T. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.32831 · Cited by 189
Mascheroni, E., Rampazzo, R., Ortenzi, M. A., Piva, G., Bonetti, S., & Piergiovanni, L. (2016) · Cellulose · doi:10.1007/s10570-015-0853-2 · Cited by 183
Investigation of mass transport properties of microfibrillated cellulose (MFC) films
Minelli, M., Baschetti, M. G., Doghieri, F., Ankerfors, M., Lindström, T., Siró, I., & Plackett, D. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.04.030 · Cited by 182
Effect of Film Thickness on the Gas-Permeation Characteristics of Glassy Polymer Membranes
Huang, Y., & Paul, D. R. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0610804 · Cited by 180
Permeation of oxygen and water vapor through EVOH films as influenced by relative humidity
Zhang, Z., Britt, I. J., & Tung, M. A. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2030 · Cited by 167
HPMC reinforced with different cellulose nano-particles
Bilbao-Sainz, C., Bras, J., Williams, T., Sénechal, T., & Orts, W. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.060 · Cited by 164
ADAME, D., & BEALL, G. (2009) · Applied Clay Science · doi:10.1016/j.clay.2008.03.005 · Cited by 162
Strength and Barrier Enhancements of Cellophane and Cellulose Derivative Films: A Review
Paunonen, S. (2013) · BioResources · doi:10.15376/biores.8.2.3098-3121 · Cited by 160
Multi-functional coating of cellulose nanocrystals for flexible packaging applications
Li, F., Biagioni, P., Bollani, M., Maccagnan, A., & Piergiovanni, L. (2013) · Cellulose · doi:10.1007/s10570-013-0015-3 · Cited by 157
Water vapor barrier properties of coated and filled microfibrillated cellulose composite films
Spence, K. L., Venditti, R. A., Rojas, O. J., Pawlak, J. J., & Hubbe, M. A. (2011) · BioResources · doi:10.15376/biores.6.4.4370-4388 · Cited by 148
Roll-to-Roll Processed Cellulose Nanofiber Coatings
Kumar, V., Elfving, A., Koivula, H. M., Bousfield, D. W., & Toivakka, M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b00417 · Cited by 148
Self-citationChen, Q., Cho, H., Manthiram, K., Yoshida, M., Ye, X., & Alivisatos, A. P. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00001 · Cited by 147
Yu, H., Yan, C., & Yao, J. (2014) · RSC Advances · doi:10.1039/c4ra12691b · Cited by 136
Aulin, C., & Ström, G. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301785a · Cited by 132
Dhar, P., Bhardwaj, U., Kumar, A., & Katiyar, V. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24127 · Cited by 131
Mousavi, S. M. M., Afra, E., Tajvidi, M., Bousfield, D. W., & Firouzabadi, M. D. (2017) · Cellulose · doi:10.1007/s10570-017-1299-5 · Cited by 127
Self-citationPredicting equilibrium moisture content of wood by mathematical models
Simpson, W. T. (1973) · Wood and Fiber Science (Society of Wood Science and Technology) · Cited by 122
Films from oat spelt arabinoxylan plasticized with glycerol and sorbitol
Mikkonen, K. S., Heikkinen, S. L., Soovre, A., Peura, M., Serimaa, R. E., Talja, R. A., Helén, H., Hyvönen, L. E. T., & Tenkanen, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30513 · Cited by 119
Market projections of cellulose nanomaterial-enabled products - Part 2: Volume estimates
COWIE, J., Bilek, E. M., Wegner, T. H., et al. (2014) · TAPPI Journal · doi:10.32964/tj13.6.57 · Cited by 117
Stochastic molecular model of enzymatic hydrolysis of cellulose for ethanol production
Kumar, D., & Murthy, G. S. (2013) · Biotechnology for Biofuels · doi:10.1186/1754-6834-6-63 · Cited by 116
Khan, R. A., Beck, S., Dussault, D., Salmieri, S., Bouchard, J., & Lacroix, M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38896 · Cited by 112
Liu, A., Medina, L., & Berglund, L. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15561 · Cited by 109
Li, S., Bashline, L., Zheng, Y., Xin, X., Huang, S., Kong, Z., Kim, S. H., Cosgrove, D. J., & Gu, Y. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1613273113 · Cited by 107
Hansen, N. M. L., Blomfeldt, T. O. J., Hedenqvist, M. S., & Plackett, D. (2012) · Cellulose · doi:10.1007/s10570-012-9764-7 · Cited by 102
Modified nanofibrillated cellulose–polyvinyl alcohol films with improved mechanical performance
Virtanen, S., Vartianen, J., Setälä, H., Tammelin, T., & Vuoti, S. (2014) · RSC Advances · doi:10.1039/c3ra46287k · Cited by 102
Spruce galactoglucomannan films show promising barrier properties
Mikkonen, K. S., Heikkilä, M. I., Helén, H., Hyvönen, L. E. T., & Tenkanen, M. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.10.049 · Cited by 100
Meesorn, W., Shirole, A., Vanhecke, D., de Espinosa, L. M., & Weder, C. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02629 · Cited by 97
Lavoine, N., Bras, J., & Desloges, I. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40106 · Cited by 96
Analysis of water adsorption by wood using the Guggenheim-Anderson-de Boer equation
Bratasz, Ł., Kozłowska, A., & Kozłowski, R. (2011) · European Journal of Wood and Wood Products · doi:10.1007/s00107-011-0571-x · Cited by 95
Liu, K., Lin, X., Chen, L., Huang, L., Cao, S., & Wang, H. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf4010065 · Cited by 92
Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan
Saxena, A., & Ragauskas, A. J. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.03.039 · Cited by 91
Gas permeability and selectivity of cellulose nanocrystals films (layers) deposited by spin coating
Herrera, M. A., Mathew, A. P., & Oksman, K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.06.036 · Cited by 91
Rodionova, G., Saito, T., Lenes, M., Eriksen, Ø., Gregersen, Ø. W., Fukuzumi, H., & Isogai, A. (2012) · Cellulose · doi:10.1007/s10570-012-9664-x · Cited by 91
Plackett, D., Anturi, H., Hedenqvist, M. S., Ankerfors, M., Gällstedt, M., Lindström, T., & Siró, I. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32254 · Cited by 90
High-barrier coated bacterial cellulose nanowhiskers films with reduced moisture sensitivity
Martínez‐Sanz, M., López‐Rubio, A., & Lagaron, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.020 · Cited by 90
The elementary fibril and supermolecular structure of cellulose in soft wood fiber
Heyn, A. N. J. (1969) · Journal of Ultrastructure Research · doi:10.1016/s0022-5320(69)90035-5 · Cited by 89
Gicquel, E., Martin, C., Yanez, J. G., et al. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0589-x · Cited by 82
Herrera, M. A., Sirviö, J. A., Mathew, A. P., & Oksman, K. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.12.127 · Cited by 80
Bardet, R., Reverdy, C., Belgacem, M. N., Leirset, I., Syverud, K., Bardet, M., & Bras, J. (2015) · Cellulose · doi:10.1007/s10570-015-0547-9 · Cited by 77
High Oxygen Nanocomposite Barrier Films Based on Xylan and Nanocrystalline Cellulose
Saxena, A., Elder, T., Kenvin, J. C., & Ragauskas, A. J. (2010) · Nano-Micro Letters · doi:10.1007/bf03353849 · Cited by 70
Bio‐based multilayer barrier films by extrusion, dispersion coating and atomic layer deposition
Vartiainen, J., Shen, Y., Kaljunen, T., Malm, T., Vähä‐Nissi, M., Putkonen, M. I., & Harlin, A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42260 · Cited by 68
Phosphorylated nanofibrillated cellulose: production and properties
Naderi, A., Lindström, T., Flodberg, G., Sundström, J., Junel, K., Runebjörk, A., Weise, C. F., & Erlandsson, J. (2016) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2016-31-01-p020-029 · Cited by 68
Transparent nanocellulose-pigment composite films
Honorato‐Rios, C., Kumar, V., Liu, J., Koivula, H. M., Xu, C., & Toivakka, M. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9291-7 · Cited by 66
Lindström, T., & Aulin, C. (2014) · Scandinavian Journal of Forest Research · doi:10.1080/02827581.2014.928365 · Cited by 65
Halász, K., Hosakun, Y., & Csóka, L. (2015) · International Journal of Polymer Science · doi:10.1155/2015/954290 · Cited by 64
Thermal properties of water insoluble alginate films containing di- and trivalent cations
Nakamura, K., Nishimura, Y., Hatakeyama, T., & Hatakeyama, H. (1995) · Thermochimica Acta · doi:10.1016/0040-6031(95)02491-3 · Cited by 64
Zhu, J., Zhou, H., Chai, X., et al. (2014) · TAPPI Journal · doi:10.32964/tj13.1.57 · Cited by 59
Fox, D. M., Rodriguez, R. S., Devilbiss, M. N., Woodcock, J. W., Davis, C. S., Sinko, R., Keten, S., & Gilman, J. W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06083 · Cited by 54
Spoljaric, S., Salminen, A., Luong, N. D., Lahtinen, P., Vartiainen, J., Tammelin, T., & Seppälä, J. V. (2013) · Polymer Composites · doi:10.1002/pc.22759 · Cited by 52
Tomé, L. C., Gonçalves, C. M. B., Boaventura, M., Brandão, L., Mendes, A. M. M., Silvestre, A. J. D., Neto, C. P., Gandini, A., Freire, C. S. R., & Marrucho, I. M. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.060 · Cited by 50
Fabrication of micropillars on nanocellulose films using a roll-to-roll nanoimprinting method
Mäkelä, T., Kainlauri, M., Willberg‐Keyriläinen, P., Tammelin, T., & Forsström, U. (2016) · Microelectronic Engineering · doi:10.1016/j.mee.2016.05.023 · Cited by 47
Yang, Q., Fujisawa, S., Saito, T., & Isogai, A. (2012) · Cellulose · doi:10.1007/s10570-012-9683-7 · Cited by 46
Butylamino-functionalized cellulose nanocrystal films: barrier properties and mechanical strength
Visanko, M., Liimatainen, H., Sirviö, J. A., Mikkonen, K. S., Tenkanen, M., Sliz, R., Hormi, O. E. O., & Niinimäki, J. (2015) · RSC Advances · doi:10.1039/c4ra15445b · Cited by 44
Biobased mineral‐oil barrier‐coated food‐packaging films
Vartiainen, J., Laine, C., Willberg‐Keyriläinen, P., Pitkänen, M., & Ohra‐aho, T. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44586 · Cited by 21
Barriers from wood hydrolysate/quaternized cellulose polyelectrolyte complexes
Yaich, A. I., Edlund, U., & Albertsson, A. (2015) · Cellulose · doi:10.1007/s10570-015-0621-3 · Cited by 15
Cited by
Developing fibrillated cellulose as a sustainable technological material
Li, T., Chen, C., Brozena, A. H., Zhu, J. Y., Xu, L., Driemeier, C., Dai, J., Rojas, O. J., Isogai, A., Wågberg, L., et al. (2021) · Nature · doi:10.1038/s41586-020-03167-7 · Cited by 1,674
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
A critical review on intelligent and active packaging in the food industry: Research and development
Soltani Firouz, M., Mohi-Alden, K., & Omid, M. (2021) · Food Research International · doi:10.1016/j.foodres.2021.110113 · Cited by 581
Application of Biodegradable Polymers in Food Packaging Industry: A Comprehensive Review
Mangaraj, S., Yadav, A., Bal, L. M., Dash, S. K., & Mahanti, N. K. (2019) · Journal of Packaging Technology and Research · doi:10.1007/s41783-018-0049-y · Cited by 525
Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications
Perera, K. Y., Jaiswal, A. K., & Jaiswal, S. (2023) · Foods · doi:10.3390/foods12122422 · Cited by 440
Metadata
- Authors
- Wang, J., Gardner, D. J., Stark, N. M., Bousfield, D. W., Tajvidi, M., & Cai, Z.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-12-12
- Volume
- 6
- Issue
- 1
- Pages
- 49-70
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2769088577
- Cited by
- 675
- References
- 116
- FWCI
- 8.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.