CoChat

High-Solid Lignocellulose Processing Enabled by Natural Deep Eutectic Solvent for Lignin Extraction and Industrially Relevant Production of Renewable Chemicals

Chen, Zhu, Bai, Xianglan, A, Lusi, Wan, Caixia · 2018 · ACS Sustainable Chemistry & Engineering

The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.

Abstract

This study investigated high-solid loading deep eutectic solvent (DES) pretreatment for lignocellulose fractionation and subsequent conversion into platform chemicals (i.e., furfural, 2,3-butanediol). Switchgrass was pretreated with choline chloride:ethylene glycol (ChCl:EG) under acidic condition at high solid loadings of 20% and 27%. Cellulose was enriched to as high as 72.6% in pretreated switchgrass due to substantial removal of lignin and xylan but minor cellulose loss. Highly concentrated sugar hydrolysate containing up to 241.2 g/L fermentable sugars (206.5 g/L glucose and 34.7 g/L xylose) with 86.2% glucose yield was obtained from pretreated switchgrass via 25% solid loading enzymatic hydrolysis for only 48 h. The high sugar concentration allowed the production of 90.2 g/L 2,3-butanediol upon fermentation, a record high titer produced from lignocellulose hydrolysate without additional sugar concentration. ChCl:EG showed good recyclability, and its reuse facilitated lignin recovery from pretreatment liquor. The pretreatment liquor resulting from four pretreatment cycles was enriched with xylan-based sugars (96.8 g/L xylose equivalents), of which 84.6% was converted to furfural. 2D HSQC NMR revealed that β-O-4 interunit linkage experienced substantial cleavage during the pretreatment. The degree of bond cleavage depended on the solid loading for pretreatment. Lignin derived from a higher solid loading pretreatment preserved the original structure of natural lignin better, thus producing increased amounts of phenolic monomers upon pyrolysis. This study demonstrated that high-solid loading, ChCl:EG pretreatment was not only effective for biomass fractionation but also enabled industrially relevant production of concentrated sugar hydrolysate, furfural, and 2,3-butanediol.

Overview

Integrity signals

Registry

Crossref · 10.1021/acssuschemeng.8b02541

Cites

44 of 44 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Cited by

See all 221

Metadata

Authors
Chen, Z., Bai, X., A, L., & Wan, C.
Affiliations
  • University of Missouri (US)
  • Iowa State University (US)
  • Iowa State University , , 2529 Union Drive , , ,
Corresponding author
Wan, Caixia
Venue
ACS Sustainable Chemistry & Engineering
Published
2018-07-31
Volume
6
Issue
9
Pages
12205-12216
ISSN
2168-0485 (ISSN-L)
OpenAlex
W2887470031
Cited by
221
References
44
Citations by year
2026: 20 · 2025: 30 · 2024: 37 · 2023: 25 · 2022: 37 · 2021: 30 · 2020: 26 · 2019: 13 · 2018: 2
FWCI
7.11
Type
journal article
Language
en
Open access
closed
Locations
ACS Sustainable Chemistry & Engineering (publishedVersion)
Funders
University of Missouri Research Board
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
  • Physical Sciences › Chemical Engineering › Catalysis › Catalysis for Biomass Conversion
  • Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
Keywords
deep eutectic solvents, choline chloride-ethylene glycol, lignocellulose fractionation, switchgrass, lignin extraction, 2,3-butanediol, furfural, enzymatic hydrolysis, lignin recovery, xylan, β-O-4 bond cleavage, lignin pyrolysis, phenolic monomers, solvent recyclability, renewable chemicals

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.