Designed from Recycled: Turning Polyethylene Waste to Covalently Attached Polylactide Plasticizers
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Abstract High-density polyethylene (HDPE) waste was successfully feedstock recycled, and the obtained chemicals were utilized for synthesis of plasticizers for polylactide (PLA). First, an effective route to recycle HDPE through a microwave-assisted hydrothermal process was established. This process led to selective degradation of HDPE to a few well-defined chemicals, namely, succinic, glutaric, and adipic acid. A model plasticizer was synthesized from the same composition of dicarboxylic acids, 1,4-butanediol, and crotonic acid. The function of crotonic acid was to produce oligomers with crotonate end groups for coupling the plasticizer to PLA main chain. The plasticizer was then blended with or coupled to PLA by a reactive extrusion process. Adding the plasticizer to PLA decreased the Tg and increased the strain at break, thus reducing the brittleness of the films. The addition of 20% (w/w) grafted plasticizer increased the strain at break of PLA from 6 to 156% and decreased the Tg by 15 °C compared with neat PLA. Finally, to verify the concept, a plasticizer was also synthesized from the dicarboxylic acid product mixture obtained from the feedstock recycling of HDPE. The recycled grafted plasticizer increased the strain at break of PLA to 142% and reduced the Tg by 10 °C. A promising route for designing from recycled feedstock, turning HDPE waste to PLA plasticizers, was thus demonstrated .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Gong, J., Michalkiewicz, B., Chen, X., Mijowska, E., Liu, J., Jiang, Z., Wen, X., & Tang, T. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500603h · Cited by 136
Sawant, S. Y., Somani, R. S., Panda, A. B., & Bajaj, H. C. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400119b · Cited by 49
Cited by
Beyond Mechanical Recycling: Giving New Life to Plastic Waste
Vollmer, I., Jenks, M. J. F., Roelands, M. C. P., White, R. J., van Harmelen, T., de Wild, P., van der Laan, G. P., Meirer, F., Keurentjes, J. T. F., & Weckhuysen, B. M. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915651 · Cited by 1,905
Critical advances and future opportunities in upcycling commodity polymers
Jehanno, C., Alty, J. W., Roosen, M., De Meester, S., Dove, A. P., Chen, E. Y.-X., Leibfarth, F. A., & Sardon, H. (2022) · Nature · doi:10.1038/s41586-021-04350-0 · Cited by 1,325
Advances and approaches for chemical recycling of plastic waste
Thiounn, T., & Smith, R. C. (2020) · Journal of Polymer Science · doi:10.1002/pol.20190261 · Cited by 857
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Upcycling and catalytic degradation of plastic wastes
Hou, Q., Zhen, M., Qian, H., Nie, Y., Bai, X., Xia, T., Laiq Ur Rehman, M., Li, Q., & Ju, M. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100514 · Cited by 335
Metadata
- Authors
- Bäckström, E., Odelius, K., & Hakkarainen, M.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-17
- Volume
- 7
- Issue
- 12
- Pages
- 11004-11013
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2946412212
- Cited by
- 98
- References
- 6
- FWCI
- 2.46
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Designed from Recycled: Turning Polyethylene Waste to Covalently Attached Polylactide Plasticizers. https://app.cochat.ai/papers/10.1021/acssuschemeng.9b02092
- The paper
- Bäckström, E., Odelius, K., & Hakkarainen, M. (2019). Designed from Recycled: Turning Polyethylene Waste to Covalently Attached Polylactide Plasticizers. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.9b02092
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.