The DOI matches its Crossref record; 268 of the 270 references it cites were found in a registry or an index.
Characterizing Variability in Lignocellulosic Biomass: A Review
Abstract
Feedstock variability is a significant barrier to the scale-up and commercialization of lignocellulosic biofuel technologies. Variability in feedstock characteristics and behavior creates numerous challenges to the biorefining industry by affecting continuous operation and biofuels yields. Currently, feedstock variability is understood and explained largely on the basis of chemical composition. Physical and mechanical properties and behavior of lignocellulosic feedstock in various unit operations, studied through advanced analytical methods, can further explain variability. Such studies will enable us in developing processes and designing equipment to improve operation and conversion performance. In this perspective, we review several advanced analytical methods that measure density, moisture content, thermal properties, flowability, grindability, rheology properties, and micromorphological characteristics. We also discuss the correlations and interactions among these properties that reflect the complexity of lignocellulosic biomass as a feedstock and the associated quality metrics and logistics of supplying consistent quality feedstock to a biorefinery. We also examine methods that have not traditionally been used to characterize lignocellulosic feedstocks but have the potential to bridge the gap in our explanation of feedstock variability.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“several fundamental and technical questions related to the variability in biomass, operating parameters, and efficient catalysis need to be addressed in the hydrothermal processing of biomass into desired products and commercialization of biofuels and bioproducts”
From Hydrothermal carbonization and liquefaction for sustainable production of hydrochar and aromatics (2021) · cites this paper as [34]
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Energy production from biomass (part 1): overview of biomass
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00118-3 · Cited by 4,860
Biomass Recalcitrance: Engineering Plants and Enzymes for Biofuels Production
Himmel, M. E., Ding, S.-Y., Johnson, D. K., Adney, W. S., Nimlos, M. R., Brady, J. W., & Foust, T. D. (2007) · Science · doi:10.1126/science.1137016 · Cited by 4,533
Recommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Line profiles of neutron powder-diffraction peaks for structure refinement
Rietveld, H. M. (1967) · Acta Crystallographica · doi:10.1107/s0365110x67000234 · Cited by 3,660
Environmental, economic, and energetic costs and benefits of biodiesel and ethanol biofuels
Hill, J., Nelson, E., Tilman, D., Polasky, S., & Tiffany, D. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0604600103 · Cited by 2,871
Research works printed but not linked: 15
- Hegedus C. R., 1993, J. Coat. Technol. Res., 65, na
- 10.1007/978-1-4899-8014-4_2p 17-35 · doi:10.1007/978-1-4899-8014-4_2p
- 10.5849/sjaf.11-046pp · doi:10.5849/sjaf.11-046pp
- Fisher K., 1935, Angew. Chem., na
- 10.13031/2013.41661 · doi:10.13031/2013.41661
- 10.1007/s00397-009-0382-8 · DOI · Paper page
- Dalpke B., 2005, J. Pulp Pap. Sci., 31, 39
- Harmsen, P.; Huijgen, W.; Bermudez, L.; Bakker, R.; López, L.; Bakker, R. Literature Review of Physical and Chemical Pretreatment Processes for Lignocellulosic Biomass ; Wageningen UR Food & Biobased Research, 2010.
- 10.1016/B0-12-226770-2/07451-2 · DOI
- Mohanaiah P., 2013, Int. J. Sci. Res. Publ., 3, na
- Jenike, A. W. Storage and Flow of Solids ; Bulletin No. 123; University of Utah: Salt Lake City, UT, 1976.
- 10.1016/j.indcrop.2016.11.028 · DOI
- 1991, British Standard BS 2955: Glossary of Terms Relating to Particle Technology
- Hrncırová M., 2013, J. Eng. Mech., 20, 309
- 10.1002/(SICI)1097-0010(199805)77:1<38::AID-JSFA999>3.0.CO;2-5 · DOI · Paper page
Cited by
Items 101–134 of 134
Niu, Y., Han, T., Lee, C. K., & Leh, C. P. (2026) · Energy & Fuels · doi:10.1021/acs.energyfuels.6c02441 · Cited by 3
Hydrothermal Carbonization of Urban Lignocellulosic Wastes – A Review
Llanos, S. A. V., Quispe, A. P. B., Scheineder, S. H., Barrios, I. C. C., Collana, J. T. M., Sánchez-Purihuamán, M., Franco, J. F., Carreño-Farfán, C., & Gamarra, F. M. C. (2023) · International Journal of Membrane Science and Technology · doi:10.15379/ijmst.v10i3.1721 · Cited by 1
“% moisture (74), while the mixture of bark, pruning, chips, and sawdust contains 11 wt.”
BackgroundChemistry and modelling of biomass gasification
Kazmi, B., & Taqvi, S. A. A. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29210-1.00082-0 · Cited by 1
Donzella, S., Serra, I., Fumagalli, A., Pellegrino, L., & Compagno, C. (2021) · Research Square · doi:10.21203/rs.3.rs-934242/v1
Puente-Urbina, A. A. (2022) · Revista Tecnología en Marcha · doi:10.18845/tm.v35i7.6343 · Cited by 3
Gajera, B., Sarma, A. K., & Jha, M. K. (2023) · Springer proceedings in energy · doi:10.1007/978-981-99-5758-3_15
Lignocellulosic biomass: structure, properties, and a potential feedstock for biofuel
Mahmood, W. M. A. W., Ghazali, N. F., Jamil, M. S. S., & Taufiq‐Yap, Y. H. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-21527-8.00007-1
Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams
Finney, T. J., Oberteuffer-Bailey, R., Wilson, A. W., Zeng, Y., Navar, R., Donohoe, B. S., & Davis, B. L. (2025) · Waste and Biomass Valorization · doi:10.1007/s12649-025-03338-5
“In an improperly designed hopper, significant discharge problems such as particle interlocking, jamming, and arching can occur, leading to equipment failure, downtime and thus higher operating costs [16, 18].”
Self-citationYano, U., Sarkar, P., & Lynch, M. (2025) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.64898/2025.12.27.696699
Techno-economic Analysis of Biomass Waste Upgrading
Osemwegie, O. O., Lawal, O. T., Fakinle, B. S., Amoo, O. T., Arutselvan, R., Sivasubramanian, P., & Mageshwaran, V. (2026) · Springer eBooks · doi:10.1007/978-981-95-0991-1_11 · Cited by 1
Fan, Y., Liu, C., Zhang, Z., Wu, S., Zheng, A., Zheng, Z., Ouyang, J., & Xiao, R. (2026) · Fuel · doi:10.1016/j.fuel.2026.138478 · Cited by 1
Circular economy, life cycle assessment, and sustainability of waste derived catalysts
Kushwaha, S. P., Hasan, S. S., Singh, K., Kumar, A., Kushwaha, P., Hafeez, A., Pandey, M., Varshney, M. M., Mishra, H., & Soni, P. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-32958-6.00023-6
Electrification opportunities and challenges in solid waste utilization
Sen, A., Mondal, P., & Dong, Q. (2026) · Chem Circularity · doi:10.1016/j.checir.2026.100023
Anjana Krishnan, A. S., Narendran, D., Arunaa, M., Yogitha, P., Arthanareeswaran, G., Mangalaraja, R. V., & Arulraj, A. (2026) · Food Bioscience · doi:10.1016/j.fbio.2026.109359
Wijaya, C., Prastika, A., Atiqa, O. I., Apol, T. R., Pertiwi, U. N. L., Riadi, L., Muharja, M., & Widjaja, A. (2026) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2026.109859
Alfian, A. D., Tangahu, B. V., Arliyani, I., & Kurniawan, S. B. (2026) · Environmental Science and Pollution Research · doi:10.1007/s11356-026-38091-2
“…impeded by feedstock variability and the difficulty of maintaining quality consistency across heterogeneous biological inputs (Miller et al. 2024; Yan et al. 2020), by processing routes such as freeze-drying and multi-stage synthesis that do not scale linearly or economically, and by…”
Virmond, E., Panzo, M. D. F. S., Orcelli, M. J. S., de Amorim, M. E. L., Porfirio, J. P. G., de Aquino, T. F., Moreira, R. D. F. P. M., Watzko, E. S., & Andersen, S. L. F. (2026) · Sustainability · doi:10.3390/su18157739
“This moderate water absorption is consistent with the hydrophilic nature of lignocellulosic constituents, whose hydroxyl groups interact with water molecules [64].”
Appiah, H., Park, S. H., & Tongco, J. V. (2026) · C – Journal of Carbon Research · doi:10.3390/c12030064 · Cited by 1
“…high structural variability (characterized by the combination of the amorphous and crystalline domains of cellulose and the highly cross-linked and aromatic structures of lignin) presents significant thermodynamic and kinetic barriers to efficient energy conversion and biofuel extraction [10,11].”
Jain, S., & Kumar, S. (2026) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2026.108049
Biochemical approaches for synthesis of performance-advantaged polymers from lignocellulosic biomass
Qian, L., Jana, S., Javaid, T., Wang, Y., Karoki, P. K., Pu, Y., Webb, E., Ragauskas, A. J., Yang, X., Urbanowicz, B. R., et al. (2026) · Green Chemistry · doi:10.1039/d6gc01235c
Self-citationKacaribu, A. A., Aisyah, Y., Febriani, Kemala, P., & Darwin (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.103012
Sound absorption of foam-formed bean hull and birch fibres
Langhans, M., Hänninen, T., Yürek, A. O., Cucharero, J., Lokki, T., & Vapaavuori, J. (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.103055
Leveraging Organic Waste for Biomethane to Contribute to Carbon Neutrality
Kusch-Brandt, S., & Weichgrebe, D. (2026) · Springer eBooks · doi:10.1007/978-981-99-7917-2_2-1
Lignocellulosic waste biomass as a valuable energy source for bioethanol production: a review
Mazhar, S., Ijaz, I., Zafar, M. N., Safdar, Z., Ahmad, F., Zubair, M., & Shafqat, S. S. (2026) · RSC Advances · doi:10.1039/d6ra06051j
Faber, F., Dernbecher, A., Gruber, S., Foerst, P., Dieguez-Alonso, A., & Vorhauer-Huget, N. (2026) · Energy & Fuels · doi:10.1021/acs.energyfuels.6c03101
Adaptive Low-Carbon Bioethanol Energy Management through Knowledge Graph–Digital Twin Frameworks
Niu, Y., Tye, Y. Y., Lee, C. K., & Leh, C. P. (2026) · ACS Omega · doi:10.1021/acsomega.6c06697 · Cited by 1
García-León, R. A., Jaramillo, H. Y., Martínez-Trinidad, J., Moreno-Pacheco, L. A., & Camperos, J. A. G. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.09.185
Padilla-Esquivel, C. A., Hernández-Pérez, L. G., & Ponce‐Ortega, J. M. (2026) · Processes · doi:10.3390/pr14193067
Deconstruction–Reconstruction Strategies Toward Sustainable, Circular Lignocellulosic Materials
Muiruri, J. K., Yeo, J. C. C., Koh, J. J., Hu, J., Sathasivam, T., Kai, D., Loh, X. J., & Li, Z. (2026) · ChemSusChem · doi:10.1002/cssc.71079
Alayont, E. K., Altintas, D., Hintoglu, K., Acik, G., & Bayrak, Y. (2026) · Water Environment Research · doi:10.1002/wer.70623
Senhaji, Y., Duret, E., Robles, E., Herrera, R., Raydan, N. D. V., & Charrier, F. (2026) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-026-07294-5
“…composition of lignocellulosic biomass, which, beyond its three main structural polymers, also contains extractable compounds (waxes, resins, tannins, and fatty acids), inorganic ash (silica, calcium, potassium), and minor components such as proteins and pectins (Yan et al., 2020) [ 73 ].”
Altaf, N. U. H., Ayyaz, M., Samart, C., He, M., Ahmad, F., & Zhang, Y. (2026) · Biochar · doi:10.1007/s42773-026-00655-3
“…to elemental analysis or ash content without mentioning more informative characteristics such as cellulose/hemicellulose/lignin distribution, extractives, inorganic speciation, particle-size distribution, moisture level, and morphology (Guo et al. 2024; Yan et al. 2020; Zhou et al. 2025a, 2025b).”
Metadata
- Authors
- Yan, J., Oyedeji, O., Leal, J. H., Donohoe, B. S., Semelsberger, T. A., Li, C., Hoover, A. N., Webb, E., Bose, E. A., Zeng, Y., Williams, C. L., Schaller, K. D., Sun, N., Ray, A. E., & Tanjore, D.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Oak Ridge National Laboratory (US)
- Los Alamos National Laboratory (US)
- National Laboratory of the Rockies (US)
- Idaho National Laboratory (US)
- Corresponding author
- Ray, Allison E.
- Tanjore, Deepti
- ORCID
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-05-04
- Volume
- 8
- Issue
- 22
- Pages
- 8059-8085
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W3022352571
- Cited by
- 134
- References
- 270
- Citations by year
- 2026: 35 · 2025: 23 · 2024: 23 · 2023: 20 · 2022: 14 · 2021: 16 · 2020: 3
- FWCI
- 4.17
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy (DE-AC07-05ID14517, DE-AC36-08GO28308)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Forest Biomass Utilization and Management
- Keywords
- lignocellulosic biomass, feedstock variability, lignocellulosic biofuels, biorefinery, feedstock characterization, density, moisture content, thermal properties, flowability, grindability, rheology, micromorphology, feedstock logistics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.