The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Toughening of Biodegradable Polylactide/Poly(butylene succinate-co-adipate) Blends via in Situ Reactive Compatibilization
Abstract
Polylactide and poly(butylene succinate-co-adipate) (PLA/PBSA) were melt-blended in the presence of triphenyl phosphite (TPP). An increase in the torque during melt mixing was used to monitor the changes in viscosity as compatibilization of the blends occurred. Scanning electron micrographs showed not only a reduction in the dispersed-phase size with increased TPP content but also fibrillated links between the PLA and PBSA phases, signifying compatibilization. Moreover, optimization of parameters such as the mixing sequence and time, TPP content, and PBSA concentration revealed that blends containing 30 and 10 wt % PBSA and 2 wt % TPP, which were processed for 30 min, were optimal in terms of thermomechanical properties. The impact strength increased from 6 kJ/m(2) for PLA to 11 and 16 kJ/m(2) for blends containing 30 and 10 wt % PBSA, respectively, whereas the elongation-at-break increased from 6% for PLA to 20 and 37% for blends containing 30 and 10 wt % PBSA, respectively. Upon compatibilization, the failure mode shifted from the brittle fracture of PLA to ductile deformation, effected by the debonding between the two phases. With improved phase adhesion, compatibilized blends not only were toughened but also did not significantly lose tensile strength and thermal stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
An overview of biodegradable packaging in food industry
Shaikh, S., Yaqoob, M., & Aggarwal, P. (2021) · Current Research in Food Science · doi:10.1016/j.crfs.2021.07.005 · Cited by 561
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Biodegradable compatibilized polymer blends for packaging applications: A literature review
Muthuraj, R., Misra, M., & Mohanty, A. K. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.45726 · Cited by 391
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Wang, H., Dong, W., & Li, Y. (2015) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00763 · Cited by 107
Palai, B., Mohanty, S., & Nayak, S. K. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106130 · Cited by 96
Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
Carbonell-Verdu, A., Ferri, J. M., Dominici, F., Boronat, T., Sanchez-Nacher, L., Balart, R., & Torre, L. (2018) · Express Polymer Letters · doi:10.3144/expresspolymlett.2018.69 · Cited by 91
Dadras Chomachayi, M., Jalali-arani, A., Beltrán, F. R., de la Orden, M. U., & Martínez Urreaga, J. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01684-0 · Cited by 76
Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06343 · Cited by 60
Li, R., Wu, L., & Li, B.-G. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b05046 · Cited by 23
Metadata
- Authors
- Ojijo, V., Sinha Ray, S., & Sadiku, R.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-05-10
- Volume
- 5
- Issue
- 10
- Pages
- 4266-4276
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2066544609
- Cited by
- 245
- References
- 4
- FWCI
- 7.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
