The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Factors that Affect Pickering Emulsions Stabilized by Graphene Oxide
Abstract
Stable Pickering emulsions were prepared using only graphene oxide (GO) as a stabilizer, and the effects of the type of oil, the sonication time, the GO concentration, the oil/water ratio, and the pH value on the stability, type, and morphology of these emulsions were investigated. In addition, the effects of salt and the extent of GO reduction on emulsion formation and stability were studied and discussed. The average droplet size decreased with sonication time and with GO concentration, and the emulsions tended to achieve good stability at intermediate oil/water ratios and at low pH values. In all solvents, the emulsions were of the oil-in-water type, but interestingly, some water-in-oil-in-water (w/o/w) multiple emulsion droplets were also observed with low GO concentrations, low pH values, high oil/water ratios, high salt concentrations, or moderately reduced GO in the benzyl chloride-water system. A Pickering emulsion stabilized by Ag/GO was also prepared, and its catalytic performance for the reduction of 4-nitrophenol was investigated. This research paves the way for the fabrication of graphene-based functional materials with novel nanostructures and microstructures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Particles as surfactants—similarities and differences
Binks, B. P. (2002) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(02)00008-0 · Cited by 3,691
Pickering, S. U. (1907) · J. Chem. Soc., Trans. · doi:10.1039/ct9079102001 · Cited by 3,113
Compton, O. C., & Nguyen, S. T. (2010) · Small · doi:10.1002/smll.200901934 · Cited by 2,858
Emulsions stabilised solely by colloidal particles
Aveyard, R., Binks, B. P., & Clint, J. H. (2003) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(02)00069-6 · Cited by 2,419
Reduced graphene oxide by chemical graphitization
Moon, I. K., Lee, J., Ruoff, R. S., & Lee, H. (2010) · Nature Communications · doi:10.1038/ncomms1067 · Cited by 2,135
Graphene Oxide Sheets at Interfaces
Kim, J., Cote, L. J., Kim, F., Yuan, W., Shull, K. R., & Huang, J. (2010) · Journal of the American Chemical Society · doi:10.1021/ja102777p · Cited by 1,762
Influence of Particle Wettability on the Type and Stability of Surfactant-Free Emulsions
Binks, B. P., & Lumsdon, S. O. (2000) · Langmuir · doi:10.1021/la000189s · Cited by 1,446
Food emulsions and foams: Stabilization by particles
Dickinson, E. (2010) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2009.11.001 · Cited by 1,192
Wettability and Surface Free Energy of Graphene Films
Wang, S., Zhang, Y., Abidi, N., & Cabrales, L. (2009) · Langmuir · doi:10.1021/la901402f · Cited by 1,019
New Pickering Emulsions Stabilized by Bacterial Cellulose Nanocrystals
Kalashnikova, I., Bizot, H., Cathala, B., & Capron, I. (2011) · Langmuir · doi:10.1021/la200971f · Cited by 789
The Real Graphene Oxide Revealed: Stripping the Oxidative Debris from the Graphene‐like Sheets
Rourke, J. P., Pandey, P. A., Moore, J. J., Bates, M., Kinloch, I. A., Young, R. J., & Wilson, N. R. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201007520 · Cited by 692
de Folter, J. W. J., van Ruijven, M. W. M., & Velikov, K. P. (2012) · Soft Matter · doi:10.1039/c2sm07417f · Cited by 517
Pickering emulsions stabilised by Laponite clay particles
Ashby, N. P., & Binks, B. P. (2000) · Physical Chemistry Chemical Physics · doi:10.1039/b007098j · Cited by 504
Stability of oil-in-water emulsions stabilised by silica particles
Binks, B. P., & Lumsdon, S. O. (1999) · Physical Chemistry Chemical Physics · doi:10.1039/a902209k · Cited by 436
Guo, Y., Sun, X., Liu, Y., Wang, W., Qiu, H., & Gao, J. (2012) · Carbon · doi:10.1016/j.carbon.2012.01.074 · Cited by 356
Self-citationNanoparticle silica-stabilised oil-in-water emulsions: improving emulsion stability
Binks, B. P., & Whitby, C. P. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.10.116 · Cited by 346
Topical delivery of lipophilic drugs from o/w Pickering emulsions
Frelichowska, J., Bolzinger, M.-A., Pelletier, J., Valour, J.-P., & Chevalier, Y. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.017 · Cited by 318
Quinoa starch granules: a candidate for stabilising food‐grade Pickering emulsions
Rayner, M., Timgren, A., Sjöö, M., & Dejmek, P. (2012) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.5610 · Cited by 244
Characterization of starch Pickering emulsions for potential applications in topical formulations
Marku, D., Wahlgren, M., Rayner, M., Sjöö, M., & Timgren, A. (2012) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.01.031 · Cited by 242
Gudarzi, M. M., & Sharif, F. (2011) · Soft Matter · doi:10.1039/c0sm01311k · Cited by 205
Inversion of Emulsions Stabilized Solely by Ionizable Nanoparticles
Binks, B. P., & Rodrigues, J. A. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200461846 · Cited by 188
Emulsions Stabilized by Carbon Nanotube−Silica Nanohybrids
Shen, M., & Resasco, D. E. (2009) · Langmuir · doi:10.1021/la901380b · Cited by 158
Wu, T., Wang, X., Qiu, H., et al. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15311d · Cited by 129
Phase inversion of particle-stabilised perfume oil–water emulsions: experiment and theory
Binks, B. P., Fletcher, P. D. I., Holt, B. L., Beaussoubre, P., & Wong, K. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp00558d · Cited by 88
Pardhy, N. P., & Budhlall, B. M. (2010) · Langmuir · doi:10.1021/la101502e · Cited by 86
Yi, C., Yiqun, Y., Ye, Z., Na, L., Xiaoya, L., Luo, J., & Jiang, M. (2012) · Langmuir · doi:10.1021/la301605a · Cited by 85
Liu, X., Yi, C., Zhu, Y., Yang, Y., Jiang, J., Cui, Z., & Jiang, M. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.04.056 · Cited by 81
Chen, H., Zhu, H., Hu, J., Zhao, Y., Wang, Q. L., Wan, J., Yang, Y., Xu, H., & Yang, X. (2011) · ACS Nano · doi:10.1021/nn102888c · Cited by 61
Double Inversion of Emulsions Induced by Salt Concentration
Zhang, J., Li, L., Wang, J., Sun, H., Xu, J., & Sun, D. (2012) · Langmuir · doi:10.1021/la300695v · Cited by 53
Cited by
Low, L. E., Siva, S. P., Ho, Y. K., Chan, E. S., & Tey, B. T. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102117 · Cited by 557
Albert, C., Beladjine, M., Tsapis, N., Fattal, E., Agnely, F., & Huang, N. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.07.003 · Cited by 500
Pickering Interfacial Catalysis for Biphasic Systems: From Emulsion Design to Green Reactions
Pera‐Titus, M., Leclercq, L., Clacens, J., De Campo, F., & Nardello‐Rataj, V. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201402069 · Cited by 493
Liu, X.-W., Sun, T.-J., Hu, J.-L., & Wang, S.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09924b · Cited by 431
Artificial cells: from basic science to applications
Xu, C., Hu, S., & Chen, X. (2016) · Materials Today · doi:10.1016/j.mattod.2016.02.020 · Cited by 344
Metadata
- Authors
- He, Y., Wu, F., Sun, X., Li, R., Guo, Y., Li, C., Zhang, L., Xing, F., Wang, W., & Gao, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-05-16
- Volume
- 5
- Issue
- 11
- Pages
- 4843-4855
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2004505287
- Cited by
- 423
- References
- 31
- FWCI
- 11.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.