The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Lignin-Derived Fused Electrospun Carbon Fibrous Mats as High Performance Anode Materials for Lithium Ion Batteries
Abstract
A novel biomass-based nitrogen-doped free-standing fused carbon fibrous mat was fabricated from lignin-polyethylene oxide (PEO) (90:10) blend via electrospinning followed by carbonization and thermal annealing in the presence of urea. The morphology and structure of the carbon fibers were characterized by field-emission scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and elemental analysis, and their electrochemical properties were investigated for the first time as anode in lithium ion batteries (LIBs). The fused carbon fibers without nitrogen doping exhibited high specific capacity up to 445 mA h g(-1) at a current density of 30 mA g(-1) (comparable to polyacrylonitrile (PAN) derived carbon nanofibers) and good cyclic stability at different current rates. After thermal annealing in the presence of urea, the charge capacity was further improved to as high as 576 mA h g(-1) and still maintained a good capacity of about 200 mAh g(-1) even at a high current rate of 2000 mA g(-1). This research demonstrates the great promise of lignin-derived nanocarbon materials for applications in energy storage systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Synthesis of N-Doped Graphene by Chemical Vapor Deposition and Its Electrical Properties
Wei, D., Liu, Y., Wang, Y., Zhang, H., Huang, L., & Yu, G. (2009) · Nano Letters · doi:10.1021/nl803279t · Cited by 3,074
Electrospinning jets and polymer nanofibers
Reneker, D. H., & Yarin, A. L. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.002 · Cited by 2,306
Wu, Z.-S., Ren, W., Xu, L., Li, F., & Cheng, H.-M. (2011) · ACS Nano · doi:10.1021/nn2006249 · Cited by 2,071
Qie, L., Chen, W., Wang, Z., Shao, Q., Li, X., Yuan, L., Hu, X., Zhang, W., & Huang, Y. (2012) · Advanced Materials · doi:10.1002/adma.201104634 · Cited by 1,656
Self-citationRecent advances in rechargeable battery materials: a chemist’s perspective
Palacín, M. R. (2009) · Chemical Society Reviews · doi:10.1039/b820555h · Cited by 1,423
Lignin – from natural adsorbent to activated carbon: A review
Suhas, Carrott, P. J. M., & Ribeiro Carrott, M. M. L. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.08.008 · Cited by 1,062
Li, Z., Xu, Z., Tan, X., Wang, H., Holt, C. M. B., Stephenson, T., Olsen, B. C., & Mitlin, D. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23599d · Cited by 1,054
Nitrogen-containing microporous carbon nanospheres with improved capacitive properties
Su, F., Poh, C. K., Chen, J. S., Xu, G., Wang, D., Li, Q., Lin, J., & Lou, X. W. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00277a · Cited by 916
(1979) · Proceedings of the Analytical Division of the Chemical Society · doi:10.1039/ad9791600143 · Cited by 904
Lignin-based carbon fibers for composite fiber applications
Kadla, J. F., Kubo, S., Venditti, R. A., Gilbert, R. D., Compere, A. L., & Griffith, W. (2002) · Carbon · doi:10.1016/s0008-6223(02)00248-8 · Cited by 770
Templated nanocarbons for energy storage
Nishihara, H., & Kyotani, T. (2012) · Advanced Materials · doi:10.1002/adma.201201715 · Cited by 745
Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries
Guo, P., Song, H., & Chen, X. (2009) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.04.036 · Cited by 669
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Kim, C., Yang, K. S., Kojima, M., Yoshida, K., Kim, Y. J., Kim, Y. A., & Endo, M. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500911 · Cited by 577
Nanocarbon Networks for Advanced Rechargeable Lithium Batteries
Xin, S., Guo, Y.-G., & Wan, L.-J. (2012) · Accounts of Chemical Research · doi:10.1021/ar300094m · Cited by 549
Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks
Milczarek, G., & Inganäs, O. (2012) · Science · doi:10.1126/science.1215159 · Cited by 510
Lignin-based Carbon Fibers: Effect of Synthetic Polymer Blending on Fiber Properties
Kubo, S., & Kadla, J. F. (2005) · Journal of Polymers and the Environment · doi:10.1007/s10924-005-2941-0 · Cited by 382
Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture
Pevida, C., Drage, T. C., & Snape, C. E. (2008) · Carbon · doi:10.1016/j.carbon.2008.06.026 · Cited by 321
The production of submicron diameter carbon fibers by the electrospinning of lignin
Ruiz-Rosas, R., Bedia, J., Lallave, M., Loscertales, I. G., Barrero, A., Rodríguez-Mirasol, J., & Cordero, T. (2010) · Carbon · doi:10.1016/j.carbon.2009.10.014 · Cited by 279
Kubo, S., & Kadla, J. F. (2004) · Macromolecules · doi:10.1021/ma0490552 · Cited by 269
Baker, D. A., Gallego, N. C., & Baker, F. S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.33596 · Cited by 258
Lallave, M., Bedia, J., Ruiz-Rosas, R. R., Rodríguez‐Mirasol, J., Cordero, T., Otero, J. C., Márquez, M., Barrero, A., & Loscertales, I. G. (2007) · Advanced Materials · doi:10.1002/adma.200700963 · Cited by 251
Zhang, F., Wang, K.-X., Li, G.-D., & Chen, J.-S. (2009) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.10.041 · Cited by 242
A new carbon fiber from lignin
Sudo, K., & Shimizu, K. (1992) · Journal of Applied Polymer Science · doi:10.1002/app.1992.070440113 · Cited by 233
Lignin-Based Electrospun Nanofibers Reinforced with Cellulose Nanocrystals
Ago, M., Okajima, K., Jakes, J. E., Park, S., & Rojas, O. J. (2012) · Biomacromolecules · doi:10.1021/bm201828g · Cited by 202
Preparation of carbon fibers from softwood lignin by atmospheric acetic acid pulping
Kubo, S., Uraki, Y., & Sano, Y. (1998) · Carbon · doi:10.1016/s0008-6223(98)00086-4 · Cited by 189
Optimizing Pyrolysis of Sugar Carbons for Use as Anode Materials in Lithium‐Ion Batteries
Xing, W., Xue, J. S., & Dahn, J. R. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837162 · Cited by 167
Mou, Z., Chen, X., Du, Y., Wang, X., Yang, P., & Wang, S. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.10.019 · Cited by 153
Self-citationHigh-capacity disordered carbons derived from peanut shells as lithium-intercalating anode materials
Fey, G. (2003) · Synthetic Metals · doi:10.1016/s0379-6779(03)00082-1 · Cited by 122
Yang, Z., Zhang, Y., Kong, J., Wong, S. Y., Li, X., & Wang, J. (2013) · Chemistry of Materials · doi:10.1021/cm303513y · Cited by 122
Self-citationKeskar, G. D., Rao, R. S., Luo, J., Hudson, J. S., Chen, J., & Rao, A. M. (2005) · Chemical Physics Letters · doi:10.1016/j.cplett.2005.07.007 · Cited by 87
Electrochemical impedance study of lithium intercalation into MCMB electrode in a gel electrolyte
ZHANG, S., & Shi, P. (2004) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00929-0 · Cited by 86
Effect of Organoclay Reinforcement on Lignin-Based Carbon Fibers
Qin, W., & Kadla, J. F. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201319p · Cited by 51
Cited by
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Collins, M. N., Nechifor, M., Tanasă, F., Zănoagă, M., McLoughlin, A., Stróżyk, M. A., Culebras, M., & Teacă, C.-A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.069 · Cited by 486
Lignin‐Derived Advanced Carbon Materials
Chatterjee, S., & Saito, T. (2015) · ChemSusChem · doi:10.1002/cssc.201500692 · Cited by 333
Zhu, J., Yan, C., Zhang, X., Yang, C., Jiang, M., & Zhang, X. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100788 · Cited by 303
Metadata
- Authors
- Wang, S.-X., Yang, L., Stubbs, L. P., Li, X., & He, C.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-11-26
- Volume
- 5
- Issue
- 23
- Pages
- 12275-12282
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2328080510
- Cited by
- 319
- References
- 36
- FWCI
- 13.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
