The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
In Situ One-Step Synthesis of Hierarchical Nitrogen-Doped Porous Carbon for High-Performance Supercapacitors
Abstract
A hierarchically structured nitrogen-doped porous carbon is prepared from a nitrogen-containing isoreticular metal-organic framework (IRMOF-3) using a self-sacrificial templating method. IRMOF-3 itself provides the carbon and nitrogen content as well as the porous structure. For high carbonization temperatures (950 °C), the carbonized MOF required no further purification steps, thus eliminating the need for solvents or acid. Nitrogen content and surface area are easily controlled by the carbonization temperature. The nitrogen content decreases from 7 to 3.3 at % as carbonization temperature increases from 600 to 950 °C. There is a distinct trade-off between nitrogen content, porosity, and defects in the carbon structure. Carbonized IRMOFs are evaluated as supercapacitor electrodes. For a carbonization temperature of 950 °C, the nitrogen-doped porous carbon has an exceptionally high capacitance of 239 F g(-1). In comparison, an analogous nitrogen-free carbon bears a low capacitance of 24 F g(-1), demonstrating the importance of nitrogen dopants in the charge storage process. The route is scalable in that multi-gram quantities of nitrogen-doped porous carbons are easily produced.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Sadezky, A., Muckenhuber, H., Grothe, H., Niessner, R., & Pöschl, U. (2005) · Carbon · doi:10.1016/j.carbon.2005.02.018 · Cited by 4,850
Carbon materials for the electrochemical storage of energy in capacitors
Frackowiak, E., & Béguin, F. (2001) · Carbon · doi:10.1016/s0008-6223(00)00183-4 · Cited by 4,523
Raman Spectra of Graphite Oxide and Functionalized Graphene Sheets
Kudin, K. N., Ozbas, B., Schniepp, H. C., Prud'homme, R. K., Aksay, I. A., & Car, R. (2008) · Nano Letters · doi:10.1021/nl071822y · Cited by 4,475
Perspectives on Carbon Nanotubes and Graphene Raman Spectroscopy
Dresselhaus, M. S., Jorio, A., Hofmann, M., Dresselhaus, G., & Saito, R. (2010) · Nano Letters · doi:10.1021/nl904286r · Cited by 3,254
Synthesis of N-Doped Graphene by Chemical Vapor Deposition and Its Electrical Properties
Wei, D., Liu, Y., Wang, Y., Zhang, H., Huang, L., & Yu, G. (2009) · Nano Letters · doi:10.1021/nl803279t · Cited by 3,074
Best practice methods for determining an electrode material's performance for ultracapacitors
Stoller, M. D., & Ruoff, R. S. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00074d · Cited by 2,282
N-Doping of Graphene Through Electrothermal Reactions with Ammonia
Wang, X., Li, X., Zhang, L., Yoon, Y., Weber, P. K., Wang, H., Guo, J., & Dai, H. (2009) · Science · doi:10.1126/science.1170335 · Cited by 2,152
Metal-Organic Framework as a Template for Porous Carbon Synthesis
Liu, B., Shioyama, H., Akita, T., & Xu, Q. (2008) · Journal of the American Chemical Society · doi:10.1021/ja7106146 · Cited by 1,829
Cited by
Advanced Energy Storage Devices: Basic Principles, Analytical Methods, and Rational Materials Design
Liu, J., Wang, J., Xu, C., Jiang, H., Li, C., Zhang, L., Lin, J., & Shen, Z. X. (2018) · Advanced Science · doi:10.1002/advs.201700322 · Cited by 1,745
Xia, W., Mahmood, A., Zou, R., & Xu, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00762c · Cited by 1,717
Hierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Metal–organic frameworks for energy storage: Batteries and supercapacitors
Wang, L., Han, Y., Feng, X., Zhou, J., Qi, P., & Wang, B. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.09.002 · Cited by 1,298
Salunkhe, R. R., Kaneti, Y. V., & Yamauchi, Y. (2017) · ACS Nano · doi:10.1021/acsnano.7b02796 · Cited by 1,279
Deng, Y., Xie, Y., Zou, K., & Ji, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08620e · Cited by 997
Nanoarchitectured Design of Porous Materials and Nanocomposites from Metal‐Organic Frameworks
Kaneti, Y. V., Tang, J., Salunkhe, R. R., Jiang, X., Yu, A., Wu, K. C. ‐., & Yamauchi, Y. (2017) · Advanced Materials · doi:10.1002/adma.201604898 · Cited by 888
Feng, X., Bai, Y., Liu, M., Li, Y., Yang, H., Wang, X., & Wu, C. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00166c · Cited by 761
Metal-organic frameworks for direct electrochemical applications
Xu, Y., Li, Q., Xue, H., & Pang, H. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.08.010 · Cited by 557
Exploring metal organic frameworks for energy storage in batteries and supercapacitors
Xu, G., Nie, P., Dou, H., Ding, B., Li, L., & Zhang, X. (2017) · Materials Today · doi:10.1016/j.mattod.2016.10.003 · Cited by 512
Song, S., Ma, F., Wu, G., Ma, D., Geng, W., & Wan, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04721h · Cited by 507
Metal–Organic Frameworks (MOFs) and MOF-Derived Materials for Energy Storage and Conversion
Zhang, X., Chen, A., Zhong, M., Zhang, Z., Zhang, X., Zhou, Z., & Bu, X.-H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0024-x · Cited by 481
Recent Breakthroughs in Supercapacitors Boosted by Nitrogen‐Rich Porous Carbon Materials
Yang, M., & Zhou, Z. (2017) · Advanced Science · doi:10.1002/advs.201600408 · Cited by 436
Metal-organic frameworks for energy storage devices: Batteries and supercapacitors
Mehtab, T., Yasin, G., Arif, M., Shakeel, M., Korai, R. M., Nadeem, M., Muhammad, N., & Lu, X. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.12.025 · Cited by 388
Sundriyal, S., Kaur, H., Bhardwaj, S. K., Mishra, S., Kim, K.-H., & Deep, A. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.04.018 · Cited by 383
Adsorption, separation, and catalytic properties of densified metal-organic frameworks
Nandasiri, M. I., Jambovane, S. R., McGrail, B. P., Schaef, H. T., & Nune, S. K. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.12.004 · Cited by 324
Self-citationZhong, S., Zhan, C., & Cao, D. (2015) · Carbon · doi:10.1016/j.carbon.2014.12.064 · Cited by 313
MOF-derived nanohybrids for electrocatalysis and energy storage: current status and perspectives
Zhang, H., Liu, X., Wu, Y., Guan, C., Cheetham, A. K., & Wang, J. (2018) · Chemical Communications · doi:10.1039/c8cc00789f · Cited by 309
Zhang, Y., Cheng, T., Wang, Y., Lai, W., Pang, H., & Huang, W. (2016) · Advanced Materials · doi:10.1002/adma.201600319 · Cited by 269
Al Zoubi, W., Kamil, M. P., Fatimah, S., Nashrah, N., & Ko, Y. G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100663 · Cited by 265
Gadipelli, S., & Guo, Z. X. (2015) · ChemSusChem · doi:10.1002/cssc.201403402 · Cited by 260
Cui, J., Xi, Y., Chen, S., Li, D., She, X., Sun, J., Han, W., Yang, D., & Guo, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603933 · Cited by 200
Controllable Syntheses of MOF‐Derived Materials
Zou, K., & Li, Z. (2018) · Chemistry – A European Journal · doi:10.1002/chem.201705415 · Cited by 172
Luo, Y., Calvillo, L., Daiguebonne, C., Daletou, M. K., Granozzi, G., & Alonso-Vante, N. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.02.028 · Cited by 72
Wu, X., Tian, Z., Hu, L., Huang, S., & Cai, J. (2017) · RSC Advances · doi:10.1039/c7ra05355j · Cited by 41
Metadata
- Authors
- Jeon, J.-W., Sharma, R., Meduri, P., Arey, B. W., Schaef, H. T., Lutkenhaus, J. L., Lemmon, J. P., Thallapally, P. K., Nandasiri, M. I., McGrail, B. P., & Nune, S. K.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-09
- Volume
- 6
- Issue
- 10
- Pages
- 7214-7222
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2083292503
- Cited by
- 325
- References
- 62
- FWCI
- 12.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.