The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Bioinspired Modification of h-BN for High Thermal Conductive Composite Films with Aligned Structure
Abstract
With the development of microelectronic technology, the demand of insulating electronic encapsulation materials with high thermal conductivity is ever growing and much attractive. Surface modification of chemical inert h-BN is yet a distressing issue which hinders its applications in thermal conductive composites. Here, dopamine chemistry has been used to achieve the facile surface modification of h-BN microplatelets by forming a polydopamine (PDA) shell on its surface. The successful and effective preparation of h-BN@PDA microplatelets has been confirmed by SEM, EDS, TEM, Raman spectroscopy, and TGA investigations. The PDA coating increases the dispersibility of the filler and enhances its interaction with PVA matrix as well. Based on the combination of surface modification and doctor blading, composite films with aligned h-BN@PDA are fabricated. The oriented fillers result in much higher in-plane thermal conductivities than the films with disordered structures produced by casting or using the pristine h-BN. The thermal conductivity is as high as 5.4 W m(-1) K(-1) at 10 vol % h-BN@PDA loading. The procedure is eco-friendly, easy handling, and suitable for the practical application in large scale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Liu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794
Facile Conjugation of Biomolecules onto Surfaces via Mussel Adhesive Protein Inspired Coatings
Lee, H., Rho, J., & Messersmith, P. B. (2009) · Advanced Materials · doi:10.1002/adma.200801222 · Cited by 1,495
An atlas of two-dimensional materials
Miró, P., Audiffred, M., & Heine, T. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00102h · Cited by 1,475
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Bioinspired catecholic chemistry for surface modification
Ye, Q., Zhou, F., & Liu, W. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15026j · Cited by 1,177
Shen, B., Zhai, W., & Zheng, W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400079 · Cited by 922
Polydopamine—a nature-inspired polymer coating for biomedical science
Lynge, M. E., van der Westen, R., Postma, A., & Städler, B. (2011) · Nanoscale · doi:10.1039/c1nr10969c · Cited by 907
Lin, Y., & Connell, J. W. (2012) · Nanoscale · doi:10.1039/c2nr32201c · Cited by 902
Pakdel, A., Bando, Y., & Golberg, D. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60260e · Cited by 809
Cited by
Two dimensional hexagonal boron nitride (2D-hBN): synthesis, properties and applications
Zhang, K., Feng, Y., Wang, F., Yang, Z., & Wang, J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc04300g · Cited by 1,218
Thermal conductivity of polymers and polymer nanocomposites
Huang, C., Qian, X., & Yang, R. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.002 · Cited by 909
Factors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Chen, J., Huang, X., Zhu, Y., & Jiang, P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604754 · Cited by 756
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Hu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Self-citationYang, J., Qi, G.-Q., Liu, Y., Bao, R.-Y., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.063 · Cited by 415
Wu, K., Wang, J., Liu, D., Lei, C., Liu, D., Lei, W., & Fu, Q. (2020) · Advanced Materials · doi:10.1002/adma.201906939 · Cited by 400
Barclay, T. G., Hegab, H. M., Clarke, S. R., & Ginic‐Markovic, M. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201601192 · Cited by 384
Chen, J., Huang, X., Sun, B., Wang, Y., Zhu, Y., & Jiang, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08061 · Cited by 375
Yang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.045 · Cited by 342
Graphene related materials for thermal management
Fu, Y., Hansson, J., Liu, Y., Chen, S., Zehri, A., Samani, M. K., Wang, N., Ni, Y., Zhang, Y., Zhang, Z.-B., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab48d9 · Cited by 301
Yang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.025 · Cited by 279
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Hu, J., Huang, Y., Zeng, X., Li, Q., Ren, L., Sun, R., Xu, J.-B., & Wong, C.-P. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.045 · Cited by 256
Self-citationYang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105
Metadata
- Authors
- Shen, H., Guo, J., Wang, H., Zhao, N., & Xu, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-06
- Volume
- 7
- Issue
- 10
- Pages
- 5701-5708
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1988901561
- Cited by
- 491
- References
- 63
- FWCI
- 16.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.