The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption
Abstract
Bulk heterojunction (BHJ) polymer solar cells (PSCs) sandwich a blend layer of conjugated polymer donor and fullerene derivative acceptor between a transparent ITO positive electrode and a low work function metal negative electrode. In comparison with traditional inorganic semiconductor solar cells, PSCs offer a simpler device structure, easier fabrication, lower cost, and lighter weight, and these structures can be fabricated into flexible devices. But currently the power conversion efficiency (PCE) of the PSCs is not sufficient for future commercialization. The polymer donors and fullerene derivative acceptors are the key photovoltaic materials that will need to be optimized for high-performance PSCs. In this Account, I discuss the basic requirements and scientific issues in the molecular design of high efficiency photovoltaic molecules. I also summarize recent progress in electronic energy level engineering and absorption spectral broadening of the donor and acceptor photovoltaic materials by my research group and others. For high-efficiency conjugated polymer donors, key requirements are a narrower energy bandgap (E(g)) and broad absorption, relatively lower-lying HOMO (the highest occupied molecular orbital) level, and higher hole mobility. There are three strategies to meet these requirements: D-A copolymerization for narrower E(g) and lower-lying HOMO, substitution with electron-withdrawing groups for lower-lying HOMO, and two-dimensional conjugation for broad absorption and higher hole mobility. Moreover, better main chain planarity and less side chain steric hindrance could strengthen π-π stacking and increase hole mobility. Furthermore, the molecular weight of the polymers also influences their photovoltaic performance. To produce high efficiency photovoltaic polymers, researchers should attempt to increase molecular weight while maintaining solubility. High-efficiency D-A copolymers have been obtained by using benzodithiophene (BDT), dithienosilole (DTS), or indacenodithiophene (IDT) donor unit and benzothiadiazole (BT), thienopyrrole-dione (TPD), or thiazolothiazole (TTz) acceptor units. The BDT unit with two thienyl conjugated side chains is a highly promising unit in constructing high-efficiency copolymer donor materials. The electron-withdrawing groups of ester, ketone, fluorine, or sulfonyl can effectively tune the HOMO energy levels downward. To improve the performance of fullerene derivative acceptors, researchers will need to strengthen absorption in the visible spectrum, upshift the LUMO (the lowest unoccupied molecular orbital) energy level, and increase the electron mobility. [6,6]-Phenyl-C(71)-butyric acid methyl ester (PC(70)BM) is superior to [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) because C(70) absorbs visible light more efficiently. Indene-C(60) bisadduct (ICBA) and Indene-C(70) bisadduct (IC(70)BA) show 0.17 and 0.19 eV higher LUMO energy levels, respectively, than PCBM, due to the electron-rich character of indene and the effect of bisadduct. ICBA and IC(70)BA are excellent acceptors for the P3HT-based PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Price, S. C., Stuart, A. C., Yang, L., Zhou, H., & You, W. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1112595 · Cited by 1,505
A Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells
Blouin, N., Michaud, A., & Leclerc, M. (2007) · Advanced Materials · doi:10.1002/adma.200602496 · Cited by 1,260
Indene−C60Bisadduct: A New Acceptor for High-Performance Polymer Solar Cells
He, Y., Chen, H.-Y., Hou, J., & Li, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja908602j · Cited by 1,244
Self-citationZhou, H., Yang, L., Stuart, A. C., Price, S. C., Liu, S., & You, W. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005451 · Cited by 1,210
Hou, J., Chen, H.-Y., Zhang, S., Li, G., & Yang, Y. (2008) · Journal of the American Chemical Society · doi:10.1021/ja806687u · Cited by 1,125
Chu, T.-Y., Lu, J., Beaupré, S., Zhang, Y., Pouliot, J.-R., Wakim, S., Zhou, J., Leclerc, M., Li, Z., Ding, J., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200314m · Cited by 1,047
Huo, L., Zhang, S., Guo, X., Xu, F., Li, Y., & Hou, J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103313 · Cited by 985
Self-citationFullerene derivative acceptors for high performance polymer solar cells
He, Y., & Li, Y. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp01178a · Cited by 941
Self-citationDevelopment of New Semiconducting Polymers for High Performance Solar Cells
Liang, Y., Wu, Y., Feng, D., Tsai, S.-T., Son, H.-J., Li, G., & Yu, L. (2009) · Journal of the American Chemical Society · doi:10.1021/ja808373p · Cited by 930
Zhao, G., He, Y., & Li, Y. (2010) · Advanced Materials · doi:10.1002/adma.201001339 · Cited by 908
Self-citationHou, J., Tan, Z., Yan, Y., He, Y., Yang, C., & Li, Y. (2006) · Journal of the American Chemical Society · doi:10.1021/ja060141m · Cited by 781
Self-citationA Thieno[3,4-c]pyrrole-4,6-dione-Based Copolymer for Efficient Solar Cells
Zou, Y., Najari, A., Berrouard, P., Beaupré, S., Réda Aïch, B., Tao, Y., & Leclerc, M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja101888b · Cited by 769
Hou, J., Park, M.-H., Zhang, S., Yao, Y., Chen, L.-M., Li, J.-H., & Yang, Y. (2008) · Macromolecules · doi:10.1021/ma800820r · Cited by 760
Svensson, M., Zhang, F., Veenstra, S. C., Verhees, W. J. H., Hummelen, J. C., Kroon, J. M., Inganäs, O., & Andersson, M. R. (2003) · Advanced Materials · doi:10.1002/adma.200304150 · Cited by 736
Li, Y., & Zou, Y. (2008) · Advanced Materials · doi:10.1002/adma.200800606 · Cited by 647
Self-citationWang, M., Hu, X., Liu, P., Li, W., Gong, X., Huang, F., & Cao, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja201131h · Cited by 620
Fullerene Bisadducts for Enhanced Open‐Circuit Voltages and Efficiencies in Polymer Solar Cells
Lenes, M., Wetzelaer, G. A. H., Kooistra, F. B., Veenstra, S. C., Hummelen, J. C., & Blom, P. W. M. (2008) · Advanced Materials · doi:10.1002/adma.200702438 · Cited by 609
Huo, L., Hou, J., Zhang, S., Chen, H., & Yang, Y. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906934 · Cited by 535
High-performance polymer heterojunction solar cells of a polysilafluorene derivative
Wang, E., Wang, L., Lan, L., Luo, C., Zhuang, W., Peng, J., & Cao, Y. (2008) · Applied Physics Letters · doi:10.1063/1.2836266 · Cited by 490
Huo, L., Hou, J., Chen, H.-Y., Zhang, S., Jiang, Y., Chen, T. L., & Yang, Y. (2009) · Macromolecules · doi:10.1021/ma9012972 · Cited by 467
Cheng, Y.-J., Hsieh, C.-H., He, Y., Hsu, C.-S., & Li, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja108259n · Cited by 308
Self-citationHigh‐Yield Synthesis and Electrochemical and Photovoltaic Properties of Indene‐C70 Bisadduct
He, Y., Zhao, G., Peng, B., & Li, Y. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001122 · Cited by 305
Self-citationAlternating Polyfluorenes Collect Solar Light in Polymer Photovoltaics
Inganäs, O., Zhang, F., & Andersson, M. R. (2009) · Accounts of Chemical Research · doi:10.1021/ar900073s · Cited by 245
Brédas, J. L., & Heeger, A. J. (1994) · Chemical Physics Letters · doi:10.1016/0009-2614(93)e1421-c · Cited by 236
Low-bandgap conjugated polymer for high efficient photovoltaic applications
Chen, Y.-C., Yu, C.-Y., Fan, Y.-L., Hung, L.-I., Chen, C.-P., & Ting, C. (2010) · Chemical Communications · doi:10.1039/c0cc01087a · Cited by 210
Zhang, M., Guo, X., Wang, X., Wang, H., & Li, Y. (2011) · Chemistry of Materials · doi:10.1021/cm2019586 · Cited by 194
Self-citationSubramaniyan, S., Xin, H., Kim, F. S., Shoaee, S., Durrant, J. R., & Jenekhe, S. A. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100215 · Cited by 190
Synthesis and Absorption Spectra of Poly(3-(phenylenevinyl)thiophene)s with Conjugated Side Chains
Hou, J., Huo, L., He, C., Yang, C., & Li, Y. (2006) · Macromolecules · doi:10.1021/ma051883n · Cited by 189
Self-citationHuo, L., Guo, X., Zhang, S., Li, Y., & Hou, J. (2011) · Macromolecules · doi:10.1021/ma200743b · Cited by 159
Self-citationHuang, Y., Huo, L., Zhang, S., Guo, X., Han, C. C.-C., Li, Y., & Hou, J. (2011) · Chemical Communications · doi:10.1039/c1cc12575c · Cited by 156
Self-citationZou, Y., Wu, W., Sang, G., Yang, Y., Liu, Y., & Li, Y. (2007) · Macromolecules · doi:10.1021/ma071402v · Cited by 132
Self-citationZhang, Y. A., Zou, J., Yip, H., Chen, K., Davies, J. A., Sun, Y., & Jen, A. K. ‐. (2011) · Macromolecules · doi:10.1021/ma2008699 · Cited by 113
Zhang, M., Guo, X., & Li, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100193 · Cited by 113
Self-citationSynthesis and Photovoltaic Properties of Bithiazole-Based Donor−Acceptor Copolymers
Zhang, M., Fan, H., Guo, X., He, Y., Zhang, Z., Min, J., Zhang, J., Zhao, G., Zhan, X., & Li, Y. (2010) · Macromolecules · doi:10.1021/ma100767b · Cited by 104
Self-citationZhang, Z., Min, J., Zhang, S., Zhang, J., Zhang, M., & Li, Y. (2011) · Chemical Communications · doi:10.1039/c1cc13477a · Cited by 96
Self-citationSynthesis and Photovoltaic Properties of D–A Copolymers Based on Dithienosilole and Benzotriazole
Min, J., Zhang, Z., Zhang, S., Zhang, M., Zhang, J., & Li, Y. (2011) · Macromolecules · doi:10.1021/ma201673m · Cited by 96
Self-citationJiang, J.-M., Yang, P.-A., Chen, H.-C., & Wei, K. (2011) · Chemical Communications · doi:10.1039/c1cc12040a · Cited by 92
Sun, Y., Cui, C., Wang, H., & Li, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100378 · Cited by 91
Self-citationHou, J., Yang, C., He, C. R., & Li, Y. (2006) · Chemical Communications · doi:10.1039/b516576h · Cited by 81
Self-citationCui, C., Fan, X., Zhang, M., Zhang, J., Min, J., & Li, Y. (2011) · Chemical Communications · doi:10.1039/c1cc14132e · Cited by 75
Self-citationZhang, M., Sun, Y., Guo, X., Cui, C., He, Y., & Li, Y. (2011) · Macromolecules · doi:10.1021/ma201565f · Cited by 66
Self-citationZhang, M., Guo, X., & Li, Y. (2011) · Macromolecules · doi:10.1021/ma201976t · Cited by 62
Self-citationZhang, M., Fan, H., Guo, X., He, Y., Zhang, Z., Min, J., Zhang, J., Zhao, G., Zhan, X., & Li, Y. (2010) · Macromolecules · doi:10.1021/ma1018654 · Cited by 58
Self-citation
Cited by
Li, S., Ye, L., Zhao, W., Zhang, S., Mukherjee, S., Ade, H., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201602776 · Cited by 1,380
Renewed Prospects for Organic Photovoltaics
Zhang, G., Lin, F. R., Qi, F., Heumüller, T., Distler, A., Egelhaaf, H.-J., Li, N., Chow, P. C. Y., Brabec, C. J., Jen, A. K.-Y., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00955 · Cited by 1,052
Designing π-conjugated polymers for organic electronics
Guo, X., Baumgarten, M., & Müllen, K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.005 · Cited by 836
Zhang, Z.-G., Qi, B., Jin, Z., Chi, D., Qi, Z., Li, Y., & Wang, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00022f · Cited by 835
Self-citationFlexible and Semitransparent Organic Solar Cells
Li, Y., Xu, G., Cui, C., & Li, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701791 · Cited by 788
Self-citation
Metadata
- Authors
- Li, Y.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-01-30
- Volume
- 45
- Issue
- 5
- Pages
- 723-733
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2050419919
- Cited by
- 2,756
- References
- 50
- FWCI
- 199.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
