The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption
Abstract
Bulk heterojunction (BHJ) polymer solar cells (PSCs) sandwich a blend layer of conjugated polymer donor and fullerene derivative acceptor between a transparent ITO positive electrode and a low work function metal negative electrode. In comparison with traditional inorganic semiconductor solar cells, PSCs offer a simpler device structure, easier fabrication, lower cost, and lighter weight, and these structures can be fabricated into flexible devices. But currently the power conversion efficiency (PCE) of the PSCs is not sufficient for future commercialization. The polymer donors and fullerene derivative acceptors are the key photovoltaic materials that will need to be optimized for high-performance PSCs. In this Account, I discuss the basic requirements and scientific issues in the molecular design of high efficiency photovoltaic molecules. I also summarize recent progress in electronic energy level engineering and absorption spectral broadening of the donor and acceptor photovoltaic materials by my research group and others. For high-efficiency conjugated polymer donors, key requirements are a narrower energy bandgap (E(g)) and broad absorption, relatively lower-lying HOMO (the highest occupied molecular orbital) level, and higher hole mobility. There are three strategies to meet these requirements: D-A copolymerization for narrower E(g) and lower-lying HOMO, substitution with electron-withdrawing groups for lower-lying HOMO, and two-dimensional conjugation for broad absorption and higher hole mobility. Moreover, better main chain planarity and less side chain steric hindrance could strengthen π-π stacking and increase hole mobility. Furthermore, the molecular weight of the polymers also influences their photovoltaic performance. To produce high efficiency photovoltaic polymers, researchers should attempt to increase molecular weight while maintaining solubility. High-efficiency D-A copolymers have been obtained by using benzodithiophene (BDT), dithienosilole (DTS), or indacenodithiophene (IDT) donor unit and benzothiadiazole (BT), thienopyrrole-dione (TPD), or thiazolothiazole (TTz) acceptor units. The BDT unit with two thienyl conjugated side chains is a highly promising unit in constructing high-efficiency copolymer donor materials. The electron-withdrawing groups of ester, ketone, fluorine, or sulfonyl can effectively tune the HOMO energy levels downward. To improve the performance of fullerene derivative acceptors, researchers will need to strengthen absorption in the visible spectrum, upshift the LUMO (the lowest unoccupied molecular orbital) energy level, and increase the electron mobility. [6,6]-Phenyl-C(71)-butyric acid methyl ester (PC(70)BM) is superior to [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) because C(70) absorbs visible light more efficiently. Indene-C(60) bisadduct (ICBA) and Indene-C(70) bisadduct (IC(70)BA) show 0.17 and 0.19 eV higher LUMO energy levels, respectively, than PCBM, due to the electron-rich character of indene and the effect of bisadduct. ICBA and IC(70)BA are excellent acceptors for the P3HT-based PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Price, S. C., Stuart, A. C., Yang, L., Zhou, H., & You, W. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1112595 · Cited by 1,505
A Low‐Bandgap Poly(2,7‐Carbazole) Derivative for Use in High‐Performance Solar Cells
Blouin, N., Michaud, A., & Leclerc, M. (2007) · Advanced Materials · doi:10.1002/adma.200602496 · Cited by 1,260
Indene−C60Bisadduct: A New Acceptor for High-Performance Polymer Solar Cells
He, Y., Chen, H.-Y., Hou, J., & Li, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja908602j · Cited by 1,244
Self-citationZhou, H., Yang, L., Stuart, A. C., Price, S. C., Liu, S., & You, W. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005451 · Cited by 1,210
Cited by
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Self-citationNon-fullerene acceptors for organic solar cells
Yan, C., Barlow, S., Wang, Z., Yan, H., Jen, A. K.-Y., Marder, S. R., & Zhan, X. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.3 · Cited by 2,710
Introduction of Fluorine and Fluorine‐Containing Functional Groups
Liang, T., Neumann, C. N., & Ritter, T. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201206566 · Cited by 2,564
Next-generation organic photovoltaics based on non-fullerene acceptors
Cheng, P., Li, G., Zhan, X., & Yang, Y. (2018) · Nature Photonics · doi:10.1038/s41566-018-0104-9 · Cited by 1,905
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
Zhao, W., Qian, D., Zhang, S., Li, S., Inganäs, O., Gao, F., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201600281 · Cited by 1,868
Li, S., Ye, L., Zhao, W., Zhang, S., Mukherjee, S., Ade, H., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201602776 · Cited by 1,380
A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance
Zhang, M., Guo, X., Ma, W., Ade, H., & Hou, J. (2015) · Advanced Materials · doi:10.1002/adma.201502110 · Cited by 1,247
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Renewed Prospects for Organic Photovoltaics
Zhang, G., Lin, F. R., Qi, F., Heumüller, T., Distler, A., Egelhaaf, H.-J., Li, N., Chow, P. C. Y., Brabec, C. J., Jen, A. K.-Y., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00955 · Cited by 1,052
Stability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Bin, H., Gao, L., Zhang, Z.-G., Yang, Y., Zhang, Y., Zhang, C., Chen, S., Xue, L., Yang, C., Xiao, M., et al. (2016) · Nature Communications · doi:10.1038/ncomms13651 · Cited by 987
Self-citationDesigning π-conjugated polymers for organic electronics
Guo, X., Baumgarten, M., & Müllen, K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.005 · Cited by 836
Zhang, Z.-G., Qi, B., Jin, Z., Chi, D., Qi, Z., Li, Y., & Wang, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00022f · Cited by 835
Self-citationKan, B., Li, M., Zhang, Q., Liu, F., Wan, X., Wang, Y., Ni, W., Long, G., Yang, X., Feng, H., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00305 · Cited by 817
Flexible and Semitransparent Organic Solar Cells
Li, Y., Xu, G., Cui, C., & Li, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701791 · Cited by 788
Self-citationNon-fullerene acceptors for organic photovoltaics: an emerging horizon
Lin, Y., & Zhan, X. (2014) · Materials Horizons · doi:10.1039/c4mh00042k · Cited by 745
Zhang, G., Chen, X.-K., Xiao, J., Chow, P. C. Y., Ren, M., Kupgan, G., Jiao, X., Chan, C. C. S., Du, X., Xia, R., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17867-1 · Cited by 721
Ye, L., Zhang, S., Huo, L., Zhang, M., & Hou, J. (2014) · Accounts of Chemical Research · doi:10.1021/ar5000743 · Cited by 699
Conjugated polymers for visible-light-driven photocatalysis
Dai, C., & Liu, B. (2020) · Energy & Environmental Science · doi:10.1039/c9ee01935a · Cited by 687
Wu, Z., Sun, C., Dong, S., Jiang, X.-F., Wu, S., Wu, H., Yip, H.-L., Huang, F., & Cao, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12664 · Cited by 684
Donor–acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
Wu, J.-S., Cheng, S.-W., Cheng, Y.-J., & Hsu, C.-S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00250d · Cited by 629
Recent progress in organic solar cells (Part I material science)
Liu, Y., Liu, B., Ma, C.-Q., Huang, F., Feng, G., Chen, H., Hou, J., Yan, L., Wei, Q., Luo, Q., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-021-1180-6 · Cited by 613
Self-citationOligomer Molecules for Efficient Organic Photovoltaics
Lin, Y., & Zhan, X. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00363 · Cited by 601
Zhou, J., Wan, X., Liu, Y., Zuo, Y., Li, Z., He, G., Long, G., Ni, W., Li, C., Su, X., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306865z · Cited by 583
Low bandgap semiconducting polymers for polymeric photovoltaics
Liu, C., Wang, K., Gong, X., & Heeger, A. J. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00650c · Cited by 555
Triarylamine: Versatile Platform for Organic, Dye-Sensitized, and Perovskite Solar Cells
Wang, J., Liu, K., Ma, L., & Zhan, X. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00432 · Cited by 536
Additives for morphology control in high-efficiency organic solar cells
Liao, H.-C., Ho, C.-C., Chang, C.-Y., Jao, M.-H., Darling, S. B., & Su, W.-F. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.013 · Cited by 535
Conjugated Polymer–Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells
Zhang, J., Zhang, Y., Fang, J., Lu, K., Wang, Z., Ma, W., & Wei, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03449 · Cited by 530
Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7%
Sun, D., Meng, D., Cai, Y., Fan, B., Li, Y., Jiang, W., Huo, L., Sun, Y., & Wang, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06414 · Cited by 527
Self-citationSingle‐Junction Organic Solar Cells Based on a Novel Wide‐Bandgap Polymer with Efficiency of 9.7%
Huo, L., Liu, T., Sun, X., Cai, Y., Heeger, A. J., & Sun, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500647 · Cited by 522
Cui, C., Wong, W.-Y., & Li, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00446a · Cited by 508
Self-citationInterfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Yin, Z., Wei, J., & Zheng, Q. (2016) · Advanced Science · doi:10.1002/advs.201500362 · Cited by 481
Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics
Yuan, J., Huang, T., Cheng, P., Zou, Y., Zhang, H., Yang, J. L., Chang, S.-Y., Zhang, Z., Huang, W., Wang, R., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08386-9 · Cited by 481
Xu, X., Yu, T., Bi, Z., Ma, W., Li, Y., & Peng, Q. (2018) · Advanced Materials · doi:10.1002/adma.201703973 · Cited by 448
Self-citationZhang, G., Zhang, K., Yin, Q., Jiang, X.-F., Wang, Z., Xin, J., Ma, W., Yan, H., Huang, F., & Cao, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b11991 · Cited by 435
Zhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Sun, C., Qin, S., Wang, R., Chen, S., Pan, F., Qiu, B., Shang, Z., Meng, L., Zhang, C., Xiao, M., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b09939 · Cited by 425
Self-citationOuyang, J. (2013) · Displays · doi:10.1016/j.displa.2013.08.007 · Cited by 422
Ashraf, R. S., Meager, I., Nikolka, M., Kirkus, M., Planells, M., Schroeder, B. C., Holliday, S., Hurhangee, M., Nielsen, C. B., Sirringhaus, H., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511984q · Cited by 417
A Selenium‐Substituted Low‐Bandgap Polymer with Versatile Photovoltaic Applications
Dou, L., Chang, W., Gao, J., Chen, C., You, J., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201203827 · Cited by 416
A Star‐Shaped Perylene Diimide Electron Acceptor for High‐Performance Organic Solar Cells
Lin, Y., Wang, Y., Wang, J., Hou, J., Li, Y., Zhu, D., & Zhan, X. (2014) · Advanced Materials · doi:10.1002/adma.201400525 · Cited by 414
Self-citationMapping Polymer Donors toward High‐Efficiency Fullerene Free Organic Solar Cells
Lin, Y., Zhao, F., Wu, Y., Chen, K., Xia, Y., Li, G., Prasad, S. K. K., Zhu, J., Huo, L., Bin, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604155 · Cited by 403
Self-citationElectronic and optoelectronic materials and devices inspired by nature
Meredith, P., Bettinger, C. J., Irimia-Vladu, M., Mostert, A. B., & Schwenn, P. E. (2013) · Reports on Progress in Physics · doi:10.1088/0034-4885/76/3/034501 · Cited by 372
Wang, E., Mammo, W., & Andersson, M. R. (2014) · Advanced Materials · doi:10.1002/adma.201304945 · Cited by 364
Li, S., Liu, W., Shi, M., Mai, J., Lau, T.-K., Wan, J., Lu, X., Li, C.-Z., & Chen, H. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03481g · Cited by 363
Yuan, J., Zhang, Y., Zhou, L., Zhang, C., Lau, T., Zhang, G., Lu, X., Yip, H., So, S. K., Beaupré, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807577 · Cited by 363
Self-citationLiu, Q., Bottle, S. E., & Sonar, P. (2020) · Advanced Materials · doi:10.1002/adma.201903882 · Cited by 363
Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials
Zhang, Z.-G., & Li, Y. (2015) · Science China Chemistry · doi:10.1007/s11426-014-5260-2 · Cited by 360
Self-citationLiu, S., Zhang, K., Lu, J., Zhang, J., Yip, H.-L., Huang, F., & Cao, Y. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408363c · Cited by 349
Long, X., Ding, Z., Dou, C., Zhang, J., Liu, J., & Wang, L. (2016) · Advanced Materials · doi:10.1002/adma.201601205 · Cited by 331
Liu, T., Huo, L., Chandrabose, S., Chen, K., Han, G., Qi, F., Meng, X., Xie, D., Ma, W., Yi, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707353 · Cited by 331
Zhang, S., Ye, L., & Hou, J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502529 · Cited by 326
Zhou, R., Jiang, Z., Yang, C., Yu, J., Feng, J., Adil, M. A., Deng, D., Zou, W., Zhang, J., Lu, K., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-13292-1 · Cited by 326
Wu, J., Li, G., Fang, J., Guo, X., Zhu, L., Guo, B., Wang, Y., Zhang, G., Arunagiri, L., Liu, F., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-18378-9 · Cited by 326
Self-citationYao, J., Yu, C., Liu, Z., Luo, H., Yang, Y., Zhang, G., & Zhang, D. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09737 · Cited by 316
Non-fullerene small molecule acceptors based on perylene diimides
Liu, Z., Wu, Y., Zhang, Q., & Gao, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06978a · Cited by 316
A planar electron acceptor for efficient polymer solar cells
Wu, Y., Bai, H., Wang, Z., Cheng, P., Zhu, S., Wang, Y., Ma, W., & Zhan, X. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02477c · Cited by 314
Recent Advances in Wide‐Bandgap Photovoltaic Polymers
Cai, Y., Huo, L., & Sun, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605437 · Cited by 313
Li, X., Pan, F., Sun, C., Zhang, M., Wang, Z., Du, J., Wang, J., Xiao, M., Xue, L., Zhang, Z.-G., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08508-3 · Cited by 308
Self-citationWan, Q., Guo, X., Wang, Z., Li, W., Guo, B., Ma, W., Zhang, M., & Li, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602181 · Cited by 299
Self-citationNarrowing the Band Gap: The Key to High-Performance Organic Photovoltaics
Cheng, P., & Yang, Y. (2020) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00157 · Cited by 294
Li, W., Roelofs, W. S. C., Wienk, M. M., & Janssen, R. A. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja305358z · Cited by 268
Qin, H., Li, L., Guo, F., Su, S., Peng, J., Cao, Y., & Peng, X. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43761b · Cited by 215
Porphyrin‐Based Bulk Heterojunction Organic Photovoltaics: The Rise of the Colors of Life
Kesters, J., Verstappen, P., Kelchtermans, M., Lutsen, L., Vanderzande, D., & Maes, W. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500218 · Cited by 193
Strategies and Software for Machine Learning Accelerated Discovery in Transition Metal Chemistry
Nandy, A., Duan, C., Janet, J. P., Gugler, S., & Kulik, H. J. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b04015 · Cited by 161
Porphyrin‐Incorporated 2D D–A Polymers with Over 8.5% Polymer Solar Cell Efficiency
Chao, Y., Jheng, J., Wu, J., Wu, K., Peng, H., Tsai, M., Wang, C., Hsiao, Y., Wang, C., Lin, C., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401345 · Cited by 119
Li, L., Huang, Y., Peng, J., Cao, Y., & Peng, X. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00858k · Cited by 102
Chen, S., Xiao, L., Zhu, X., Peng, X., Wong, W.-K., & Wong, W.-Y. (2015) · Chemical Communications · doi:10.1039/c5cc05807d · Cited by 69
Cuesta, V., Vartanian, M., Cruz, P. D. L., Singhal, R., Sharma, G. D., & Langa, F. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09408b · Cited by 59
Shi, S., Jiang, P., Chen, S., Sun, Y., Wang, X., Wang, K., Shen, S., Li, X., Li, Y., & Wang, H. (2012) · Macromolecules · doi:10.1021/ma3014367 · Cited by 56
Self-citationVijay Kumar, C., Cabau, L., Koukaras, E. N., Sharma, G. D., & Palomares, E. (2015) · Nanoscale · doi:10.1039/c4nr05565a · Cited by 50
A–π–D–π–A based porphyrin for solution processed small molecule bulk heterojunction solar cells
Kumar, C. V., Cabau, L., Koukaras, E. N., Sharma, A., Sharma, G. D., & Palomares, E. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03463a · Cited by 49
Sharma, G. D., Zervaki, G. E., Angaridis, P. A., Kitsopoulos, T. N., & Coutsolelos, A. G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500090h · Cited by 47
Morán, G., Arrechea, S., Cruz, P. D. L., Cuesta, V., Biswas, S., Palomares, E., Sharma, G. D., & Langa, F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04369k · Cited by 43
Wang, L., Shi, S., Ma, D., Chen, S., Gao, C., Wang, M., Shi, K., Li, Y., Li, X., & Wang, H. (2015) · Macromolecules · doi:10.1021/ma502050b · Cited by 39
Self-citationLiang, T., Xiao, L., Liu, C., Gao, K., Qin, H., Cao, Y., & Peng, X. (2016) · Organic Electronics · doi:10.1016/j.orgel.2015.11.035 · Cited by 38
Sharma, G. D., Siddiqui, S. A., Nikiforou, A., Zervaki, G. E., Georgakaki, I., Ladomenou, K., & Coutsolelos, A. G. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01076d · Cited by 36
Wang, L., Qiao, Z., Gao, C., Liu, J., Zhang, Z.-G., Li, X., Li, Y., & Wang, H. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00507 · Cited by 35
Self-citationShi, S., Wang, X., Sun, Y., Chen, S., Li, X., Li, Y., & Wang, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31649h · Cited by 33
Self-citationAngiolini, L., Cocchi, V., Lanzi, M., Salatelli, E., Tonelli, D., & Vlamidis, Y. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.03.054 · Cited by 19
Montcada, N. F., Arrechea, S., Molina-Ontoria, A., Aljarilla, A. I., de la Cruz, P., Echegoyen, L., Palomares, E., & Langa, F. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.09.003 · Cited by 16
Regioregular Polythiophene–Porphyrin Supramolecular Copolymers for Optoelectronic Applications
Chevrier, M., Kesters, J., Blayo, C., Richeter, S., Van Der Lee, A., Coulembier, O., Surin, M., Mehdi, A., Lazzaroni, R., Evans, R. C., et al. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500280 · Cited by 15
Sharma, G. D., Zervaki, G. E., Angaridis, P., & Coutsolelos, A. G. (2014) · RSC Adv. · doi:10.1039/c4ra07770a · Cited by 13
Synthesis and characterization of porphyrin‐based D‐π‐A conjugated polymers for polymer solar cells
Jiang, P., Shi, S., Chen, S., Wang, X., Wang, H., Li, Y., & Li, X. (2013) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.26607 · Cited by 13
Self-citationLuo, X., Wu, F., Xiao, H., Guo, H., Liu, Y., & Tan, S. (2017) · Synthetic Metals · doi:10.1016/j.synthmet.2016.11.026 · Cited by 10
Metadata
- Authors
- Li, Y.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-01-30
- Volume
- 45
- Issue
- 5
- Pages
- 723-733
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2050419919
- Cited by
- 2,756
- References
- 50
- FWCI
- 199.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.