The DOI matches its Crossref record.
Structure and Properties of Polyurethanes Prepared from Triglyceride Polyols by Ozonolysis
Abstract
Ozonolysis was used to obtain polyols with terminal primary hydroxyl groups and different functionalities from trilinolein (or triolein), low-saturation canola oil, and soybean oil. The functionality of the model polyol from triolein (trilinolein) was 3.0 and that of soy polyol was 2.5, due to the presence of unreactive saturated fatty acids, while canola gave a polyol with a functionality of 2.8. All polyols exhibited a high tendency to crystallize at room temperature. The resulting waxes had melting points comparable to that of paraffin and very low viscosities in the liquid state. The polyols were cross-linked using 4,4'-methylenebis(phenyl isocyanate) to give polyurethanes. Glass transitions (T(g)) for the model-, canola-, and soy-based polyurethanes were 53, 36, and 22 degrees C, respectively. The about 30 degrees C lower T(g) of the soy-based polyurethane than that of the model polyurethane was the result not only of lower functionality but also of the presence of saturated fatty acids in the former. Polyurethane from the canola polyol had intermediate cross-linking density and properties. These polyurethanes displayed excellent mechanical properties and higher glass transition temperatures compared to polyurethanes from epoxidized and hydroformylated polyols of the same functionality, presumably due to the absence or lower content of dangling chains in the former.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Polymers from Renewable Resources: A Perspective for a Special Issue of Polymer Reviews
Williams, C., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834133 · Cited by 977
Polyurethanes from Vegetable Oils
Petrović, Z. S. (2008) · Polymer Reviews · doi:10.1080/15583720701834224 · Cited by 929
Self-citationThermosetting (bio)materials derived from renewable resources: A critical review
Raquez, J.-M., Deléglise, M., Lacrampe, M.-F., & Krawczak, P. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.001 · Cited by 910
Polyurethane Foams: Past, Present, and Future
Gama, N. V., Ferreira, A., & Barros-Timmons, A. (2018) · Materials · doi:10.3390/ma11101841 · Cited by 902
Vegetable-oil-based polymers as future polymeric biomaterials
Miao, S., Wang, P., Su, Z., & Zhang, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.040 · Cited by 573
Controlled Polymerization of Next-Generation Renewable Monomers and Beyond
Yao, K., & Tang, C. (2013) · Macromolecules · doi:10.1021/ma3019574 · Cited by 485
Plant Oils as Platform Chemicals for Polyurethane Synthesis: Current State-of-the-Art
Lligadas, G., Ronda, J. C., Galià, M., & Cádiz, V. (2010) · Biomacromolecules · doi:10.1021/bm100839x · Cited by 436
Synthesis of biodegradable polymers from renewable resources
Tschan, M. J.-L., Brulé, E., Haquette, P., & Thomas, C. M. (2012) · Polym. Chem. · doi:10.1039/c2py00452f · Cited by 428
Lu, Y., & Larock, R. C. (2008) · Biomacromolecules · doi:10.1021/bm801030g · Cited by 377
Bio-based polyurethane: An efficient and environment friendly coating systems: A review
Noreen, A., Zia, K. M., Zuber, M., Tabasum, S., & Zahoor, A. F. (2016) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2015.11.018 · Cited by 331
Structure-properties relationships of cellular materials from biobased polyurethane foams
Peyrton, J., & Avérous, L. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100608 · Cited by 282
Green synthesis of flexible polyurethane foams from liquefied lignin
Cinelli, P., Anguillesi, I., & Lazzeri, A. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.04.005 · Cited by 282
Hojabri, L., Kong, X., & Narine, S. S. (2009) · Biomacromolecules · doi:10.1021/bm801411w · Cited by 269
Physical Properties of Polyurethanes Produced from Polyols from Seed Oils: II. Foams
Narine, S. S., Kong, X., Bouzidi, L., & Sporns, P. (2007) · Journal of the American Oil Chemists' Society · doi:10.1007/s11746-006-1008-2 · Cited by 258
Metadata
- Authors
- Petrović, Z. S., Zhang, W., & Javni, I.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-08
- Volume
- 6
- Issue
- 2
- Pages
- 713-719
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020698822
- Cited by
- 336
- References
- 0
- FWCI
- 11.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.