Morphology and Properties of Soy Protein and Polylactide Blends
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
Blends of soy protein (SP) and a semicrystalline polylactide (PLA) were prepared using a twin-screw extruder. The melt rheology, phase morphology, mechanical properties, water resistance, and thermal and dynamic mechanical properties were investigated on specimens prepared by injection molding of these blends. The melt flowability of soy-based plastics was improved through blending with PLA. Scanning electron microscopy revealed that a co-continuous phase structure existed in the blends with soy protein concentrate (SPC) to PLA ratios ranging from 30:70 to 70:30. SPC/PLA blends showed fine co-continuous phase structures, while soy protein isolate (SPI)/PLA blends presented severe phase coarsening. At the same SP to PLA ratios, SPC/PLA blends demonstrated a higher tensile strength than SPI/PLA blends. The water absorption of soy plastics was greatly reduced by blending with PLA. The compatibility was improved by adding 1-5 phr poly(2-ethyl-2-oxazoline) (PEOX) in the blends, and the resulting blends showed an obvious increase in tensile strength and a reduction in water absorption for SPI/PLA blends. The compatibility between SP and PLA was evaluated by mechanical testing, dynamic mechanical analysis (DMA), water absorption, and scanning electron microscopy (SEM) experiments. Differential scanning calorimetry (DSC) revealed that PLA in the blends was mostly amorphous in the injection molded articles, and SP accelerated the cold crystallization and could increase the final crystallinity of PLA in the blends.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Self-citationProtein-Based Films and Coatings
(2002) · CRC Press eBooks · doi:10.1201/9781420031980 · Cited by 618
AOI, K. (1996) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00020-8 · Cited by 402
Morphology and Properties of Soy Protein Isolate Thermoplastics Reinforced with Chitin Whiskers
Lu, Y., Weng, L., & Zhang, L. (2004) · Biomacromolecules · doi:10.1021/bm034516x · Cited by 356
Mechanical and thermal properties of extruded soy protein sheets
Zhang, J., Mungara, P., & Jane, J. (2001) · Polymer · doi:10.1016/s0032-3861(00)00624-8 · Cited by 331
Self-citationStrengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate
Wang, H., Sun, X., & Seib, P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 279
High performance LDPE/thermoplastic starch blends: a sustainable alternative to pure polyethylene
Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2003) · Polymer · doi:10.1016/s0032-3861(02)00907-2 · Cited by 260
Blends of isotactic polypropylene and ethylene-propylene rubbers: rheology, morphology and mechanics
Danesi, S., & Porter, R. S. (1978) · Polymer · doi:10.1016/0032-3861(78)90255-0 · Cited by 260
Ljungberg, N., Andersson, T., & Wesslén, B. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12106 · Cited by 200
Research works printed but not linked: 2
- Wang C., 2002, Part B: Polym. Phys
- Jane J., 1996, Patent 5,523,293
Cited by
Items 101–176 of 176
Wu, Q., Ma, N., Liu, T., & Koranteng, E. (2017) · Polymer Composites · doi:10.1002/pc.24694 · Cited by 18
Chang, P. R., Yang, Y., Huang, J., Xia, W., Feng, L., & Wu, J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30043 · Cited by 18
Liu, T., Peng, X., Mi, H., Li, H., Turng, L., & Xu, B. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25175 · Cited by 19
Güzdemir, Ö., Bermudez, V. M., Kanhere, S. V., & Ogale, A. A. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25369 · Cited by 18
Mekonnen, T. H., Misra, M., & Mohanty, A. K. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-373-7.00017-2 · Cited by 21
Pal, A. K., Bhattacharjee, S. K., Gaur, S. S., Pal, A., & Katiyar, V. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45546 · Cited by 17
Study of Effects of Processing Aids on Properties of Poly(lactic acid)/Soy Protein Blends
Liu, B., Jiang, L., & Zhang, J. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0274-0 · Cited by 20
Self-citationProtein-Polymer Grafts via a Soy Protein Derived Macro-RAFT Chain Transfer Agent
Bhattacharjee, S., & Bong, D. T.-Y. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0264-2 · Cited by 16
Biobased Products from Soybeans
Schmitz, J. F., Erhan, S. Z., Sharma, B. K., Johnson, L. A., & Myers, D. J. (2008) · Elsevier eBooks · doi:10.1016/b978-1-893997-64-6.50020-2 · Cited by 16
Survey of Soy Protein Flour as a Novel Dry Strength Agent for Papermaking Furnishes
Jin, H., Lucia, L. A., Rojas, O. J., Hubbe, M. A., & Pawlak, J. J. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf303023j · Cited by 16
Derivatization of Milk Protein Using Poly (Acrylamide): Its Characterization and Application
Sinha, S. (2018) · Macromolecular Symposia · doi:10.1002/masy.201800120 · Cited by 15
Biothermoplastics from soyproteins by steaming
Yang, Y., & Reddy, N. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.08.018 · Cited by 15
Processing and Properties of Biobased Blends from Soy Meal and Natural Rubber
Wu, Q., Selke, S. E. M., & Mohanty, A. K. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700132 · Cited by 15
Poly(methyl methacrylate)/soy protein green composites as gas barrier materials
Kisku, S. K., & Swain, S. K. (2012) · Chinese Journal of Polymer Science · doi:10.1007/s10118-012-1148-9 · Cited by 15
Song, Z., Huang, X., Lu, X., Lv, Q., Xu, N., Pang, S., Pan, L., & Li, T. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46536 · Cited by 14
Konwar, D. B., Sethy, S., Satapathy, B. K., & Jacob, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.014 · Cited by 15
Liu, Y., Cui, Y., Yin, G., & Ma, H. (2009) · Cited by 13
Mechanical Properties of Thermoplastic Protein From Bloodmeal and Polyester Blends
Ishak, K. M. K., & Verbeek, C. J. R. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300396 · Cited by 12
Mamun, A. A., & Bledzki, A. K. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300140 · Cited by 13
Bioplastics: solution to a green environment and sustainability
Nisar, B., Pahalvi, H. N., Gulzar, A., Rashid, S., Majeed, L. R., & Kamili, A. N. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15291-7.00021-3 · Cited by 23
Bonham, S., Misra, M., & Mohanty, A. K. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000404 · Cited by 11
Tian, K., Shao, Z., & Chen, X. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35309 · Cited by 11
Effects of Soy Protein on the Crystallization and Dielectric Properties of PEG/PEG Copolymers
Ji, J., Li, B., & Zhong, W.-H. K. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100684 · Cited by 9
Zhou, X.-X., & Dou, Q. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-022-11855-x · Cited by 7
Su, J., Zhu, F., Meng, Y., Han, J., Wang, K., & Fu, Q. (2017) · Colloid & Polymer Science · doi:10.1007/s00396-017-4225-3 · Cited by 8
Compatibilization effects in thermoplastic protein/polyester blends
Smith, M. J., & Verbeek, C. J. R. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45808 · Cited by 10
Biodegradable and Biobased Polymers
Jiang, L., & Zhang, J. (2011) · Elsevier eBooks · doi:10.1016/b978-1-4377-3514-7.10009-1 · Cited by 14
Self-citationBiodegradable and Biobased Polymers
Jiang, L., Sabzi, M., & Zhang, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-88667-3.00009-6 · Cited by 9
Self-citationAlonso‐González, M., Félix, M., Romero, A., Aliotta, L., Gigante, V., Sergi, C., Bavasso, I., & Sarasini, F. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.126081 · Cited by 9
Soy protein-based polymer blends and composites
Jayakumar, A., Radoor, S., Radhakrishnan, E. K., Nair, I. C., Siengchin, S., & Parameswaranpillai, J. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823791-5.00012-0 · Cited by 7
Novel Biocomposites from Biobased Epoxy and Corn-Based Distillers Dried Grains (DDG)
Deka, H., Wang, T., Mohanty, A. K., & Misra, M. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0739-2 · Cited by 7
Conjugation of Soybean Oil and It’s Free-Radical Copolymerization with Acrylonitrile
Yang, L., Dai, C., Ma, L., & Lin, S. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0259-z · Cited by 7
Liu, T., Wang, Y., Eyler, A., Chang, Y., & Zhong, W. H. (2015) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2015.64 · Cited by 7
Li, Y., Qiu, Y., Wei, L., Yu, S., Liu, G., Yu, L., Gao, G., Gao, J., Huang, J., Wang, Y., et al. (2025) · Journal of Polymer Science · doi:10.1002/pol.20241182 · Cited by 6
Kasapis, S. (2009) · Elsevier eBooks · doi:10.1016/b978-0-12-374195-0.00007-0 · Cited by 8
Konwar, D. B., Satapathy, B. K., & Jacob, J. (2018) · Polymer International · doi:10.1002/pi.5723 · Cited by 7
Development of Novel Soy Protein-Based Polymer Blends
Zhang, J., & Chen, F. (2010) · ACS symposium series · doi:10.1021/bk-2010-1043.ch004 · Cited by 6
Self-citationBiopolymer foams from Novatein thermoplastic protein and poly(lactic acid)
Walallavita, A. S., Verbeek, C. J. R., & Lay, M. C. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45561 · Cited by 6
Renoux, J., Dani, J., Douchain, C., Prashantha, K., & Krawczak, P. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46442 · Cited by 5
Ion-induced effective control of morphologies of soy protein biocomposites
Eyler, A., Wang, Y., Liu, T., Li, B., & Zhong, W.-H. K. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-8816-4 · Cited by 5
Blends of polylactic acid and arylated soy protein isolate with triacetine as plasticiser
Kumar, R. (2013) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/1743289813y.0000000052 · Cited by 5
Perspectives Of Bioplastics- A Review
Muniyandi, K., Punamalai, G., Sachithanantham, P., Chardrasekaran, N., & Kamaraj, Y. (2020) · International journal of scientific and technology research · Cited by 5
Development of Biodegradable Polymer Composites
Jiang, L., Tsai, M.-H., Anderson, S., Wolcott, M. P., & Zhang, J. (2011) · ACS symposium series · doi:10.1021/bk-2011-1067.ch014 · Cited by 5
Self-citationBiocompatible Thermoplastic Composite Blended With HAp and CS for 3D Printing
Ranjan, N., Singh, R., & Ahuja, I. S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.11237-8 · Cited by 8
Liu, B., Guevara, G. Z., Zhang, J., & Liu, L. (2012) · Green Materials · doi:10.1680/gmat.12.00015 · Cited by 4
Self-citationHe, Z., CHENG, H. N., Ford, C. V., Nam, S., Fortier, C. A., Cintrón, M. S., Olanya, O. M., & Uknalis, J. (2024) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol4040042 · Cited by 4
Marsilla, K. I. K., & Verbeek, C. J. R. (2013) · International Journal of Chemical Engineering and Applications · doi:10.7763/ijcea.2013.v4.273 · Cited by 4
Hakkarainen, M., & Finne‐Wistrand, A. (2011) · Wiley eBooks · doi:10.1002/9781118104729.ch9 · Cited by 5
Nanoparticle-Incorporated Soy Protein Isolate Films
Rani, S., & Kumar, R. (2020) · Nanotechnology in the Life Sciences · doi:10.1007/978-3-030-31938-0_2 · Cited by 3
Industrial Use of Oil Cakes for Material Applications
Rouilly, A., & Vaca‐García, C. (2013) · Royal Society of Chemistry eBooks · doi:10.1039/9781849737326-00185 · Cited by 3
Prabhakar, M. N., & Song, J. I. (2014) · Composites Research · doi:10.7234/composres.2014.27.5.196 · Cited by 3
SURFACE AND BULK MODIFICATION OF POLY(LACTIC ACID)
Rasal, R. M. (2009) · TigerPrints (Clemson University) · Cited by 7
Lazaro‐Hdez, C., Miranda-Pinzon, M., Vicente-Vinas, M. D. P., Boronat, T., & Martínez, J. I. (2026) · Journal of Polymers and the Environment · doi:10.1007/s10924-026-03813-7 · Cited by 3
Habib, M., Bashir, K., Jan, S., & Jan, K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95624-6.00008-4 · Cited by 2
A Further Research on the Properties of PLA/TiO2 Nanocomposites
Luo, Y. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.608-609.996 · Cited by 2
Grewell, D., Carolan, S. T., & Srinivasan, G. (2013) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2013.634120 · Cited by 2
Can Plastics be Ever Replaced in the Dairy Industry?
Ratha, P., Noyonika, Chaurasiya, D., & Kaul, G. (2020) · Current Science · doi:10.18520/cs/v119/i9/1411-1416 · Cited by 2
The state of the art of biopolymers-new challenges, opportunities, and future prospects
Ravindran, L., Sreekala, M. S., Goda, K., & Thomas, S. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99853-6.00023-1 · Cited by 2
Soy protein polymers: Enhancing the water stability property
Srinivasan, G. (2010) · doi:10.31274/etd-180810-1884 · Cited by 2
BIODEGRADABLE POLY(LACTIC ACID) NANOCOMPOSITES: SYNTHESIS AND CHARACTERIZATION
Li, Y. (2011) · K-State Research Exchange (Kansas State University) · Cited by 2
Decoloured Novatein® and PLA Blends Compatibilized with Itaconic Anhydride
Izuchukwu, S. C. P., Verbeek, C. J. R., & Bier, J. M. (2018) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.884.3 · Cited by 1
Processing Soy Protein Concentrate as Plastic in Polymer Blends
Chen, F., & Zhang, J. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00264-8 · Cited by 1
Self-citationInvestigation of soy protein blends prepared by simultaneous plasticization and mixing
Chen, F. (2010) · doi:10.7273/000006182 · Cited by 1
Soy Protein: State‐of‐the‐Art, New Challenges and Opportunities
Visakh, P. M. (2017) · Wiley eBooks · doi:10.1002/9781119419075.ch1 · Cited by 1
Liu, B. (2005) · Research Exchange (Washington State University)
Ren, D. C., Zhao, D. M., Qian, L., & Du, Y. H. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.472.809
A Survey of Soy Protein as a Novel Dry Strength Agent for Papermaking
Xu, Z. J., Liu, Y., & Wang, Z. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1073-1076.239
Fabrication of Soy Oil Epoxy Resin Based Composites
Seemamahannop, R., Pai, V. P., Flanigan, V. J., & Kapila, S. (2008)
Soy Protein Isolate‐Based Films
Zhang, S., & Kang, H. (2017) · Wiley eBooks · doi:10.1002/9781119419075.ch8
Bioplastic blends incorporating polyamide-11
Ruehle, D. A. (2016) · Digital Collections of Colorado (Colorado State University)
Rashvand, S. (2015) · TUScholarShare (Temple University)
Kathuria, A., Detyothin, S., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch14 · Cited by 1
Fabrication, properties, and biomedical applications of soy protein-based materials
Shankar, R. K., Mehetre, S. S., Ameta, R. K., Behere, S. S., & Parmar, J. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-90545-9.00007-0
Cross-Linked Biocomposites with Both Matrix and Fillers Made from Soy-Derived Ingredients
Domnich, B., & Voronov, A. S. (2025) · Journal of Composites Science · doi:10.3390/jcs9120678
Metadata
- Authors
- Zhang, J., Jiang, L., Zhu, L., Jane, J.-L., & Mungara, P.
- Affiliations
- Washington State University (US)
- Iowa State University (US)
- Corresponding author
- Zhang, Jinwen
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-19
- Volume
- 7
- Issue
- 5
- Pages
- 1551-1561
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2028401332
- Cited by
- 176
- References
- 42
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 4 · 2023: 3 · 2022: 5 · 2021: 1 · 2020: 7 · 2019: 2 · 2018: 12 · 2017: 11 · 2016: 12 · 2015: 14 · 2014: 8 · 2013: 9 · 2012: 10
- FWCI
- 6.43
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Iowa State University Digital Repository (Iowa State University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- soy protein, polylactic acid, polymer blends, phase coarsening, soy protein isolate, soy protein concentrate, poly(2-ethyl-2-oxazoline), blend compatibility, melt rheology, water absorption, tensile strength, cold crystallization, crystallinity, biodegradable plastics
- MeSH terms
- Calorimetry, Differential Scanning, Kinetics, Microscopy, Electron, Scanning, Polyesters, Glycine max, Stress, Mechanical, Thermodynamics, Soybean Proteins
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.