The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Investigation of Drug Release and Matrix Degradation of Electrospun Poly(dl-lactide) Fibers with Paracetanol Inoculation
Abstract
This study was aimed at assessing the potential use of electrospun fibers as drug delivery vehicles with focus on the different diameters and drug contents to control drug release and polymer fiber degradation. A drug-loaded solvent-casting polymer film was made with an average thickness of 100 microm for comparative purposes. DSC analysis indicated that electrospun fibers had a lower T(g) but higher transition enthalpy than solvent-casting polymer film due to the inner stress and high degree of alignment and orientation of polymer chains caused by the electrospinning process. Inoculation of paracetanol led to a further slight decrease in the T(g) and transition enthalpy. An in vitro drug release study showed that a pronounced burst release or steady release phase was initially observed followed by a plateau or gradual release during the rest time. Fibers with a larger diameter exhibited a longer period of nearly zero order release, and higher drug encapsulation led to a more significant burst release after incubation. In vitro degradation showed that the smaller diameter and higher drug entrapment led to more significant changes of morphologies. The electrospun fiber mat showed almost no molecular weight reduction, but mass loss was observed for fibers with small and medium size, which was characterized with surface erosion and inconsistent with the ordinarily polymer degrading form. Further wetting behavior analysis showed that the high water repellent property of electrospun fibers led to much slower water penetration into the fiber mat, which may contribute to the degradation profiles of surface erosion. The specific degradation profile and adjustable drug release behaviors by variation of fiber characteristics made the electrospun nonwoven mat a potential drug delivery system rather than polymer films and particles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Superhydrophobic Carbon Nanotube Forests
Lau, K. K. S., Bico, J., Teo, K. B. K., Chhowalla, M., Amaratunga, G. A. J., Milne, W. I., McKinley, G. H., & Gleason, K. K. (2003) · Nano Letters · doi:10.1021/nl034704t · Cited by 1,537
Kenawy, E.-R., Bowlin, G. L., Mansfield, K., Layman, J., Simpson, D. G., Sanders, E. H., & Wnek, G. E. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00041-x · Cited by 1,311
Micro/Nano encapsulation via electrified coaxial liquid jets
Loscertales, I. G., Barrero, A., Guerrero, I., Cortijo, R., Marquez, M., & Gañán-Calvo, A. M. (2002) · Science · doi:10.1126/science.1067595 · Cited by 1,017
Biodegradable electrospun fibers for drug delivery
Zeng, J., Xu, X., Chen, X., Liang, Q., Bian, X., Yang, L., & Jing, X. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(03)00372-9 · Cited by 832
Luu, Y. K., Kim, K., Hsiao, B. S., Chu, B., & Hadjiargyrou, M. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(03)00097-x · Cited by 796
Kim, K., Luu, Y. K., Chang, C., Fang, D., Hsiao, B. S., Chu, B., & Hadjiargyrou, M. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.04.009 · Cited by 755
Recent development of polymer nanofibers for biomedical and biotechnological applications
Zhang, Y., Lim, C. T., Ramakrishna, S., & Huang, Z.-M. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4428-x · Cited by 649
Verreck, G., Chun, I., Rosenblatt, J., Peeters, J., Dijck, A. V., Mensch, J., Noppe, M., & Brewster, M. E. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(03)00342-0 · Cited by 477
Tunable, Superhydrophobically Stable Polymeric Surfaces by Electrospinning
Acatay, K., Simsek, E., Ow‐Yang, C., & Menceloglu, Y. Z. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200461092 · Cited by 323
Hagan, S. A., Coombes, A. G. A., Garnett, M. C., Dunn, S. E., Davies, M. C., Illum, L., Davis, S. S., Harding, S. E., Purkiss, S., & Gellert, P. R. (1996) · Langmuir · doi:10.1021/la950649v · Cited by 319
Zong, X., Ran, S., Kim, K.-S., Fang, D., Hsiao, B. S., & Chu, B. (2003) · Biomacromolecules · doi:10.1021/bm025717o · Cited by 265
Predicting Controlled-Release Behavior of Degradable PLA-b-PEG-b-PLA Hydrogels
Mason, M. N., Metters, A. T., Bowman, C. N., & Anseth, K. S. (2001) · Macromolecules · doi:10.1021/ma010025y · Cited by 202
Enzymatic Degradation of Poly(L‐lactide) and Poly(ε‐caprolactone) Electrospun Fibers
Zeng, J., Chen, X., Liang, Q., Xu, X., & Jing, X. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400092 · Cited by 166
Kissel, T., Li, Y. X., Volland, C., Görich, S., & Koneberg, R. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00163-8 · Cited by 146
Poly-d,l-lactide–co-poly(ethylene glycol) microspheres as potential vaccine delivery systems
Zhou, S., Liao, X., Li, X., Deng, X., & Li, H. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00423-6 · Cited by 87
Self-citationLi, X., Deng, X., Yuan, M., Xiong, C., Huang, Z., Zhang, Y., & Jia, W. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001003)78:1<140::aid-app180>3.0.co;2-p · Cited by 54
Self-citationLi, X., Deng, X., & Huang, Z. (2001) · Pharmaceutical Research · doi:10.1023/a:1011043230573 · Cited by 49
Self-citation
Cited by
Electrospun polymer biomaterials
Ding, J., Zhang, J., Li, J., Li, D., Xiao, C., Xiao, H., Yang, H., Zhuang, X., & Chen, X. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.01.002 · Cited by 605
Electrospun nanofibrous materials for tissue engineering and drug delivery
Cui, W., Zhou, Y., & Chang, J. (2010) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/11/1/014108 · Cited by 492
Self-citationDesign Challenges in Polymeric Scaffolds for Tissue Engineering
Echeverria Molina, M. I., Malollari, K. G., & Komvopoulos, K. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.617141 · Cited by 397
Electrospun Fibrous Mats with High Porosity as Potential Scaffolds for Skin Tissue Engineering
Zhu, X., Cui, W., Li, X., & Jin, Y. (2008) · Biomacromolecules · doi:10.1021/bm800476u · Cited by 383
Self-citationElectrospun polymer micro/nanofibers as pharmaceutical repositories for healthcare
Feng, X., Li, J., Zhang, X., Liu, T., Ding, J., & Chen, X. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.03.020 · Cited by 322
Metadata
- Authors
- Cui, W., Li, X., Zhu, X., Yu, G., Zhou, S., & Weng, J.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-18
- Volume
- 7
- Issue
- 5
- Pages
- 1623-1629
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2167993308
- Cited by
- 342
- References
- 17
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.