Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Porosity and pore size regulated the degradation rate and the release of low molar mass degradation products from porous polylactide (PLA) scaffolds. PLA scaffolds with porosities above 90% and different pore size ranges were subjected to hydrolytic degradation and compared to their solid analog. The solid film degraded fastest and the degradation rate of the porous structures decreased with decreasing pore size. Degradation products were detected earlier from the solid films compared to the porous structures as a result of the additional migration path within the porous structures. An intermediate degradation rate profile was observed when the pore size range was broadened. The morphology of the scaffolds changed during hydrolysis where the larger pore size scaffolds showed sharp pore edges and cavities on the scaffold surface. In the scaffolds with smaller pores, the pore size decreased during degradation and a solid surface was formed on the top of the scaffold. Porosity and pore size, thus, influenced the degradation and the release of degradation products that should be taken into consideration when designing porous scaffolds for tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
In vitro and in vivo degradation of porous poly(dl-lactic-co-glycolic acid) foams
Lu, L., Peter, S. J., D. Lyman, M., Lai, H.-L., Leite, S. M., Tamada, J. A., Uyama, S., Vacanti, J. P., Langer, R., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00047-8 · Cited by 668
Host response to tissue engineered devices
Babensee, J. E., Anderson, J. M., McIntire, L. V., & Mikos, A. G. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(98)00023-4 · Cited by 585
In vitro degradation of a novel poly(lactide-co-glycolide) 75/25 foam
Holy, C. E., Dang, S. M., Davies, J. E., & Shoichet, M. S. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00256-7 · Cited by 241
Cited by
Yang, J., Yang, Y., Wu, W.-M., Zhao, J., & Jiang, L. (2014) · Environmental Science & Technology · doi:10.1021/es504038a · Cited by 1,022
Poly(lactide- co -glycolide) porous scaffolds for tissue engineering and regenerative medicine
Pan, Z., & Ding, J. (2012) · Interface Focus · doi:10.1098/rsfs.2011.0123 · Cited by 418
A circular economy approach to plastic waste
Payne, J., McKeown, P., & Jones, M. D. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.05.014 · Cited by 385
Transparent Electronics for Wearable Electronics Application
Won, D., Bang, J., Choi, S. H., Pyun, K. R., Jeong, S., Lee, Y., & Ko, S. H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00139 · Cited by 339
Strategic Design and Fabrication of Engineered Scaffolds for Articular Cartilage Repair
Izadifar, Z., Chen, X., & Kulyk, W. (2012) · Journal of Functional Biomaterials · doi:10.3390/jfb3040799 · Cited by 203
Metadata
- Authors
- Odelius, K., Höglund, A., Kumar, S., Hakkarainen, M., Ghosh, A. K., Bhatnagar, N., & Albertsson, A.-C.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-23
- Volume
- 12
- Issue
- 4
- Pages
- 1250-1258
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2022867533
- Cited by
- 144
- References
- 5
- FWCI
- 3.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide. https://app.cochat.ai/papers/10.1021/bm1015464
- The paper
- Odelius, K., Höglund, A., Kumar, S., Hakkarainen, M., Ghosh, A. K., Bhatnagar, N., & Albertsson, A.-C. (2011). Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide. Biomacromolecules. https://doi.org/10.1021/bm1015464
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.