Renewable-Resource Thermoplastic Elastomers Based on Polylactide and Polymenthide
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
An alpha,omega-functionalized polymenthide was synthesized by the ring-opening polymerization of menthide in the presence of diethylene glycol with diethyl zinc as the catalyst. Termination with water afforded the dihydroxy polymenthide. The reaction of this telechelic polymer with triethylaluminum formed the corresponding aluminum alkoxide macroinitiator that was used for the controlled polymerization of lactide to yield biorenewable polylactide-b-polymenthide-b-polylactide triblock copolymers. The molecular weight and chemical composition were easily adjusted by the monomer-to-initiator ratios. Microphase separation in these triblock copolymers was confirmed by small-angle X-ray scattering and differential scanning calorimetry. A representative triblock was prepared with a hexagonally packed cylindrical morphology as determined by small-angle X-ray scattering, and tensile testing was employed to assess the mechanical behavior. On the basis of the ultimate elongations and elastic recovery, these triblock copolymers behaved as thermoplastic elastomers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The larger the number of branches, the better the property improvement.41,42”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
In the citing paper
“Six-arm star-branched random and block copolymers, for example, 6s-l-lactide-co-ε-CL (Tg: 0.2 °C) and 6s-l-lactide-b-ε-CL (Tg: +11 °C) having a similar comonomer composition and Mn < 30,000 were equally effective in improving the tensile toughness of the blend.”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
In the citing paper
“Star-branched copolymers showed a larger improvement of % elongation at break compared to linear polymers.”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
Citations
Cites
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Holden, G., Bishop, E. T., & Legge, N. R. (1969) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070260104 · Cited by 310
Deformation of Oriented Lamellar Block Copolymer Films
Cohen, Y., Albalak, R. J., Dair, B. J., Capel, M. S., & Thomas, E. L. (2000) · Macromolecules · doi:10.1021/ma000513q · Cited by 174
Something new in the field of PLA/GA bioresorbable polymers?
Vert, M., Schwach, G., Engel, R., & Coudane, J. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00240-x · Cited by 173
Functional Lactide Monomers: Methodology and Polymerization
Gerhardt, W. W., Noga, D. E., Hardcastle, K. I., García, A. J., Collard, D. M., & Weck, M. (2006) · Biomacromolecules · doi:10.1021/bm060024j · Cited by 155
Hiki, S., Miyamoto, M., & Kimura, Y. (2000) · Polymer · doi:10.1016/s0032-3861(00)00086-0 · Cited by 134
Characterization of Polylactide-b-polyisoprene-b-polylactide Thermoplastic Elastomers
Frick, E. M., Zalusky, A. S., & Hillmyer, M. A. (2003) · Biomacromolecules · doi:10.1021/bm025628b · Cited by 121
Self-citationSipos, L., Zsuga, M., & Deák, G. (1995) · Macromolecular Rapid Communications · doi:10.1002/marc.1995.030161209 · Cited by 69
Ishimori, M., Tomoshige, T., & Tsuruta, T. (1968) · Die Makromolekulare Chemie · doi:10.1002/macp.1968.021200117 · Cited by 31
Research works printed but not linked: 20
- Albertsson A.-C., 2003, Biomacromolecules, 4, 1486
- For, 2001, Polymer, 42, 6219
- For, 1997, J. Appl. Polym. Sci., 66, 1505
- For, 1996, Macromol. Symp. 2000
- Frick E. M., 2000, Macromol. Rapid Commun., 21, 1322, 10.1002/1521-3927(20001201)21:18<1317::AID-MARC1317>3.0.CO;2-B · doi:10.1002/1521-3927(20001201)21:18<1317::aid-marc1317>3.0.co;2-b
- Huang L., 2007, Biomaterials, 28, 1751
- Zhang Z., 2004, Macromol. Chem. Phys., 205, 875
- Stridsberg K., 2000, Part A: Polym. Chem
- Kricheldorf H. R., 2005, Macromolecules, 38, 8226
- Wang Y., 2002, Nat. Biotechnol., 20, 606
- Zhang D., 2005, Biomacromolecules, 6, 2095
- Zhang D., 2004, Macromolecules, 37, 8200
- Zhang D., 2004, Macromolecules, 37, 5281
- Williams C. K., 2003, J. Am. Chem. Soc., 125, 11359
- Semenov A. N., 1985, Sov. Phys. JETP, 61, 733
- Matsen M. W., 1997, Part B: Polym. Phys
- See, 1996, Macromolecules, 29, 8370
- Honeker C. C., 2000, Macromolecules, 33, 9406
- Honeker C. C., 2000, Macromolecules, 33, 9417
- For, 2007, Macromolecules, 40, 1593
Cited by
Items 101–185 of 185
Delgove, M. A. F., Elford, M. T., Bernaerts, K. V., & Wildeman, S. M. A. D. (2018) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5623 · Cited by 22
Liffland, S., Kumler, M. S., & Hillmyer, M. A. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.3c00437 · Cited by 23
Self-citationMasutani, K., & Kimura, Y. (2016) · Polymer International · doi:10.1002/pi.5172 · Cited by 22
Jing, Z., Shi, X., & Zhang, G. (2017) · Polymer International · doi:10.1002/pi.5404 · Cited by 21
Deokar, M. D., Garnaik, B., & Sivaram, S. (2022) · ACS Omega · doi:10.1021/acsomega.1c04486 · Cited by 21
Zahir, L., Kida, T., Tanaka, R., Nakayama, Y., Shiono, T., Kawasaki, N., Yamano, N., & Nakayama, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109353 · Cited by 21
Wang, S., Ding, W., Yang, G., & Robertson, M. L. (2015) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500274 · Cited by 21
Zhang, B., Wei, Z., Zhao, Y., Che, R., Wang, Y., Leng, X., & Li, Y. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.12.010 · Cited by 21
Kong, J. F., Lipik, V. T., Abadie, M. J. M., Deen, G. R., & Venkatraman, S. S. (2011) · Polymer International · doi:10.1002/pi.3130 · Cited by 21
Supersoft Norbornene‐Based Thermoplastic Elastomers with High Strength and Upper Service Temperature
Cater, H. L., Allen, M. J., Linnell, M. I., Rylski, A. K., Wu, Y., Lien, H., Mangolini, F., Freeman, B. D., & Page, Z. A. (2024) · Advanced Materials · doi:10.1002/adma.202402431 · Cited by 20
Thermoplastic Elastomers Based on Block, Graft, and Star Copolymers
Wang, W., Lu, W., Kang, N., Mays, J. W., & Hong, K. (2017) · InTech eBooks · doi:10.5772/intechopen.68586 · Cited by 22
Novel synthesis method of ester free trimethylene carbonate derivatives
Nobuoka, H., & Ajiro, H. (2018) · Tetrahedron Letters · doi:10.1016/j.tetlet.2018.12.002 · Cited by 20
Delgove, M. A. F., Wróblewska, A. A., Stouten, J., van Slagmaat, C. A. M. R., Noordijk, J., Wildeman, S. M. A. D., & Bernaerts, K. V. (2020) · Polymer Chemistry · doi:10.1039/c9py01777a · Cited by 20
Liu, Y., Zhang, M., Shen, Y., & Li, Z. (2025) · Polymer science & technology. · doi:10.1021/polymscitech.5c00050 · Cited by 20
Nagata, M., & Inaki, K. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33531 · Cited by 19
Tailoring Polylactide Degradation: Copolymerization of a Carbohydrate Lactone and S,S-Lactide
Tang, M., Dong, Y., Stevens, M. M., & Williams, C. K. (2010) · Macromolecules · doi:10.1021/ma100688n · Cited by 20
Adams, F., Pehl, T. M., Kränzlein, M., Kernbichl, S., Kang, J., Papadakis, C. M., & Rieger, B. (2020) · Polymer Chemistry · doi:10.1039/d0py00379d · Cited by 18
Shi, D., Hua, J., Zhang, L., & Chen, M. (2015) · Polymers · doi:10.3390/polym7030468 · Cited by 18
Diaz, C., Tomković, T., Goonesinghe, C., Hatzikiriakos, S. G., & Mehrkhodavandi, P. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01276 · Cited by 17
Zhao, J.-K., Yang, G., Zhu, X., & Wu, G. (2019) · Polymer Chemistry · doi:10.1039/c9py01085h · Cited by 16
Kobayashi, K., Kanmuri, S., Hayashi, Y., Masutani, K., & Kimura, Y. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400098 · Cited by 16
Jin, C., Leng, X., Zhang, M., Wang, Y., Wei, Z., & Li, Y. (2019) · Polymer International · doi:10.1002/pi.5958 · Cited by 17
Gardella, L., Cavallo, D., Colonna, S., Fina, A., & Monticelli, O. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27389 · Cited by 16
Ring‐Opening Polymerization Strategies for Degradable Polyesters
Narmon, A. S., Jenisch, L. M., Pitet, L. M., & Dusselier, M. (2022) · Wiley eBooks · doi:10.1002/9783527827589.ch7 · Cited by 16
Precision synthesis of sustainable thermoplastic elastomers from lysine‐derived monomers
Liu, S., Zhang, X., Li, M., Ren, X., & Tao, Y. (2016) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28394 · Cited by 15
Konwar, D. B., Sethy, S., Satapathy, B. K., & Jacob, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.014 · Cited by 15
Delgove, M. A. F., Fürst, M. J. L. J., Fraaije, M. W., Bernaerts, K. V., & Wildeman, S. M. A. D. (2017) · ChemBioChem · doi:10.1002/cbic.201700427 · Cited by 15
Wei, Z., Che, R., Shao, S., Wang, Y., Leng, X., & Li, Y. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106348 · Cited by 15
A Supramolecular Approach to Photoresponsive Thermo/Solvoplastic Block Copolymer Elastomers
Wang, X., Vapaavuori, J., Zhao, Y., & Bazuin, C. G. (2014) · Macromolecules · doi:10.1021/ma501278b · Cited by 16
Yu, X., Wang, L., Zhang, M., Dong, X., Shen, Y., & Li, Z. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202422779 · Cited by 13
Principles of Step-Growth Polymerization (Polycondensation and Polyaddition)
Zhang, M., June, S. M., Long, T. E., & Kong, J. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.01410-7 · Cited by 14
Taşkin, E., Hazer, B., Beşırlı, N., & Çavuş, G. (2012) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2012.642222 · Cited by 13
Soyama, M., Kiuchi, Y., Iji, M., Tanaka, S., & Toyama, K. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40366 · Cited by 12
Nishiwaki, Y., Kimura, Y., Masutani, K., & Lee, C. (2018) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29060 · Cited by 11
Progress in Catalytic Ring-Opening Polymerization of Biobased Lactones
Al-Shok, L., Haddleton, D. M., & Adams, F. (2022) · Advances in Polymer Science · doi:10.1007/12_2021_111 · Cited by 10
Biorenewable Multiphase Polymers
Robertson, M. L., Hillmyer, M. A., Mortamet, A., & Ryan, A. J. (2010) · MRS Bulletin · doi:10.1557/mrs2010.651 · Cited by 12
Self-citationSynthesis of dicyano-substituted ε-caprolactone and its (co)polymers
Toplishek, M., Žagar, E., & Pahovnik, D. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.08.014 · Cited by 10
Zhao, N., Cao, X., Shi, J., & Li, Z. (2020) · Chinese Journal of Polymer Science · doi:10.1007/s10118-020-2415-9 · Cited by 10
Cavallo, D., Gardella, L., Soda, O., Sparnacci, K., & Monticelli, O. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.06.012 · Cited by 10
Zahir, L., Kida, T., Tanaka, R., Nakayama, Y., Shiono, T., Kawasaki, N., Yamano, N., & Nakayama, A. (2021) · Life · doi:10.3390/life11010043 · Cited by 11
Homogeneous Catalyst Design for the Synthesis of Aliphatic Polycarbonates and Polyesters
Coates, G. W., & Jeske, R. C. (2010) · Wiley eBooks · doi:10.1002/9783527628698.hgc011 · Cited by 12
Nishiwaki, Y., Masutani, K., Kimura, Y., & Lee, C. (2022) · Journal of Polymer Science · doi:10.1002/pol.20210883 · Cited by 8
Arıcan, M. O., Koldankaya, T., Mert, S., Çoban, H., Erdoğan, S., & Mert, O. (2023) · Polymer Chemistry · doi:10.1039/d2py01452a · Cited by 8
Nakayama, Y., Matsu-ura, T., Tanaka, R., Shiono, T., Hino, S., Kawasaki, N., Yamano, N., Nakayama, A., Tezuka, R., & Tanaka, K. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110978 · Cited by 8
Poly(lactide)s as Robust Renewable Materials
Becker, J. M., & Dove, A. P. (2011) · Wiley eBooks · doi:10.1002/9783527636167.ch9 · Cited by 11
Konwar, D. B., Satapathy, B. K., & Jacob, J. (2018) · Polymer International · doi:10.1002/pi.5723 · Cited by 7
Hydrolytic degradation of polyisobutylene and poly‐ L ‐lactide–based multiblock copolymers
Ojha, U., Kulkarni, P. P., Cozzens, D., & Faust, R. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24161 · Cited by 8
Winnacker, M. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400380 · Cited by 6
Fluorinated thermoplastic elastomers
Kumar, D., Dolui, S., Banerjee, S., & Ameduri, B. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-91758-2.00010-6 · Cited by 7
Monomers and Polymers Derived from Renewable or Partially Renewable Resources
Parthiban, A. (2014) · Wiley eBooks · doi:10.1002/9781118860168.ch5 · Cited by 6
Bio-Sourced Polymers: Recent Advances
Cramail, H., Bizet, B., Lamarzelle, O., Durand, P.-L., Hibert, G., & Grau, É. (2020) · Series on chemistry, energy and the environment · doi:10.1142/9789811210587_0005 · Cited by 7
Qin, K.-X., Li, S.-S., Xu, J., Li, Z., Li, Z., & Cheng, C. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111803 · Cited by 5
Zhu, X., Yang, G., Xie, R. J., & Wu, G. (2021) · Angewandte Chemie · doi:10.1002/ange.202115189 · Cited by 4
Nishiwaki, Y., Masutani, K., Kimura, Y., & Lee, C. (2020) · Journal of Polymer Science · doi:10.1002/pol.20190192 · Cited by 4
Winnacker, M. (2022) · Advances in polymer science · doi:10.1007/12_2022_123 · Cited by 4
Duan, R. X., Guo, K., He, Y., Chen, J. Z., Niu, M. J., Wang, L. X., & Li, X. F. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.262.567 · Cited by 4
Lebarbé, T. (2013) · theses.fr (ABES) · doi:10.70675/06479c91z6b0dz433azab51z3e66c66837d9 · Cited by 9
Hu, R., Zheng, A., Zhang, C., Wang, C., Zhang, J., Ge, C., Li, Q., Zhang, B., & Jiang, F. (2025) · Cellulose · doi:10.1007/s10570-025-06809-z · Cited by 3
“In contrast, bio-based elastomers are made from sustainable biomass resources include corn, lignin, soybean, cellulose, rosin, chitin, and plant oils (Luo et al. 2024; Melendez-Zamudio et al. 2023; Wanamaker et al. 2007; Wang et al. 2020, 2017).”
Liu, K., Zhao, H., Ding, N., Chen, C., Jiang, X., Yu, S., Wang, J., Liu, F., & Zhu, J. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111806 · Cited by 3
Synthesis, Thermal and Mechanical Properties of Linear and Star Poly(L‐lactide)s
Nanok, T., Khanom, N., Hormnirun, P., Chansaenroch, C., & Laobuthee, A. (2023) · ChemistrySelect · doi:10.1002/slct.202301046 · Cited by 3
Transformations of Seven-Membered Terpene Lactones toward Low-Molecular-Weight Bioregulators
Vydrina, V. A., Yakovleva, M. P., & Ishmuratov, G. Y. (2023) · Russian Journal of Organic Chemistry · doi:10.1134/s1070428023060015 · Cited by 2
Poly(vinyl ether) Star Copolymers as Bioderived Thermoplastic Elastomers
Shankel, S. L., Krajovic, D. M., Spring, S. W., Zhang, J. Y., Hillmyer, M. A., & Fors, B. P. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01668 · Cited by 2
Self-citationAn Improved Approach to Poly(Ester-Carbonate) Conjugates
Mo, G., Yue, J., Ma, P., Huang, Y., Chen, X., & Jing, X. (2011) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050610x551952 · Cited by 2
Zhang, D., & Dumont, M. (2018) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201800039 · Cited by 2
Hornberger, L.-S., Hiotidis, S., Jain, S., Benz, M., Montan, H., Estes, D. P., Kästner, J., & Adams, F. (2025) · Chemistry - A European Journal · doi:10.1002/chem.202501380 · Cited by 1
Cichoń, K., Kost, B., Safandowska, M., Różański, A., & Baśko, M. (2025) · Polymer · doi:10.1016/j.polymer.2025.129501 · Cited by 1
Yanagawa, K., Kodama, A., Tomita, H., Kita, S., Hachisuka, S.-I., Kikukawa, H., Uchiyama, S., Maenaka, K., & Matsumoto, K. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c04919 · Cited by 1
Synthesis of Biodegradable Thermoplastic Elastomers
Nakayama, Y., & Shiono, T. (2012) · International Polymer Science and Technology · doi:10.1177/0307174x1203901202 · Cited by 1
Rahim, N. A. M., Rasidi, M. S. M., Musa, L., & Masa, A. (2022) · AIP conference proceedings · doi:10.1063/5.0090709 · Cited by 1
Toughening of Polylactic Acid Modified with Reactive Silicones
Soyama, M., Kiuchi, Y., & Iji, M. (2012) · KOBUNSHI RONBUNSHU · doi:10.1295/koron.69.179
Synthesis of Biodegradable Thermoplastic Elastomers
Nakayama, Y., & Shiono, T. (2012) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.85.229
Synthesis and Properties of Polylactide-based Poly(ester-urethane)s with Ionic Groups
Nakayama, Y., OHMORI, T., Tanaka, R., Shiono, T., & Shirahama, H. (2014) · Journal of the Japan Institute of Energy · doi:10.3775/jie.93.921
Block Copolymers for Sustainable Thermoplastic Elastomers and Nanoparticle Fabrication
Nasiri, M. (2017) · University of Minnesota Digital Conservancy (University of Minnesota)
Development of Sustainable Thermoplastic Elastomers
Wang, S. (2015)
Deokar, M. D., Kulkarni, A., Garnaik, B., Lele, A. K., & Sivaram, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821998-0.00010-7 · Cited by 1
Liu, J., Blosch, S. E., Volokhova, A. S., Crater, E. R., Gallin, C. F., Moore, R. B., Matson, J. B., & Byers, J. A. (2024) · Angewandte Chemie · doi:10.1002/ange.202317699
Conversions of seven-membered terpene lactones towards low-molecular bioregulators
Vydrina, V. A., Yakovleva, M. P., & Ishmuratov, G. Y. (2023) · Журнал органической химии · doi:10.31857/s0514749223050010
Renew: Sustainable and renewable feedstocks for elastomer compounds and additives
da Fonseca, A. R., Maddalozzo, A. E. D., Bystronski, A. R., Restelatto, D., Carpenedo, G. A., Bonatto, L. D., Abatti, L., Bortoluz, J., Guerra, N. B., Tomazi, R. C., et al. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-28989-7.00007-9
Principles of Step-Growth Polymerization (Polycondensation and Polyaddition)
Barker, C. M., Zhang, M., June, S. M., & Long, T. E. (2026) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00203-9
Honore, J. (2019) · theses.fr (ABES) · doi:10.70675/f1be1930zfb66z4469z92bbz35d008fd206d · Cited by 1
Elaboration de nouveaux élastomères thermoplastiques biosourcés à base d’huiles végétales
Costa, C. (2020) · theses.fr (ABES) · doi:10.70675/f65e6d9dzfb2ez41cbzaebdzebc6e1979535
Terpene-based (meth)acrylate polymers as new class of functional materials
Noppalit, S. (2019) · theses.fr (ABES) · doi:10.70675/a0fa8d4czf342z4d88za6bbz39118d561122 · Cited by 1
Thermoplastic Poly(α-amino acid) Elastomers via Metal-Free Janus Polymerization
Zhang, K., Ni, X., & Ling, J. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00137
Kumler, M. S., & Hillmyer, M. A. (2026) · ACS Macro Letters · doi:10.1021/acsmacrolett.6c00423
Self-citationTowards greener yttrium‐catalyzed ring‐opening polymerization via an all‐terpene reaction concept
Hornberger, L.-S., App, J., Pottgiesser, C. S., & Adams, F. (2026) · Polymer International · doi:10.1002/pi.70222
Metadata
- Authors
- Wanamaker, C. L., O'Leary, L. E., Lynd, N. A., Hillmyer, M. A., & Tolman, W. B.
- Affiliations
- University of Minnesota (US)
- Department of Chemistry, University of Minnesota, 207 Pleasant Street SE, Minneapolis, Minnesota 55455-0431
- Corresponding author
- Tolman, William B.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-10-26
- Volume
- 8
- Issue
- 11
- Pages
- 3634-3640
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1999907439
- Cited by
- 183
- References
- 15
- Citations by year
- 2026: 4 · 2025: 11 · 2024: 5 · 2023: 8 · 2022: 10 · 2021: 10 · 2020: 12 · 2019: 13 · 2018: 13 · 2017: 11 · 2016: 12 · 2015: 16 · 2014: 15 · 2013: 4 · 2012: 11
- FWCI
- 2.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Division of Chemistry
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- thermoplastic elastomers, polylactic acid, ring-opening polymerization, diethylene glycol, controlled polymerization, triblock copolymers, microphase separation, cylindrical morphology, mechanical properties, elastic recovery, bio-based polymers
- MeSH terms
- Calorimetry, Differential Scanning, Magnetic Resonance Spectroscopy, Plastics, Polyesters, Temperature, Molecular Structure, Elastomers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.