Renewable-Resource Thermoplastic Elastomers Based on Polylactide and Polymenthide
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
An alpha,omega-functionalized polymenthide was synthesized by the ring-opening polymerization of menthide in the presence of diethylene glycol with diethyl zinc as the catalyst. Termination with water afforded the dihydroxy polymenthide. The reaction of this telechelic polymer with triethylaluminum formed the corresponding aluminum alkoxide macroinitiator that was used for the controlled polymerization of lactide to yield biorenewable polylactide-b-polymenthide-b-polylactide triblock copolymers. The molecular weight and chemical composition were easily adjusted by the monomer-to-initiator ratios. Microphase separation in these triblock copolymers was confirmed by small-angle X-ray scattering and differential scanning calorimetry. A representative triblock was prepared with a hexagonally packed cylindrical morphology as determined by small-angle X-ray scattering, and tensile testing was employed to assess the mechanical behavior. On the basis of the ultimate elongations and elastic recovery, these triblock copolymers behaved as thermoplastic elastomers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The larger the number of branches, the better the property improvement.41,42”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
In the citing paper
“Six-arm star-branched random and block copolymers, for example, 6s-l-lactide-co-ε-CL (Tg: 0.2 °C) and 6s-l-lactide-b-ε-CL (Tg: +11 °C) having a similar comonomer composition and Mn < 30,000 were equally effective in improving the tensile toughness of the blend.”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
In the citing paper
“Star-branched copolymers showed a larger improvement of % elongation at break compared to linear polymers.”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
Citations
Cites
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Holden, G., Bishop, E. T., & Legge, N. R. (1969) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070260104 · Cited by 310
Deformation of Oriented Lamellar Block Copolymer Films
Cohen, Y., Albalak, R. J., Dair, B. J., Capel, M. S., & Thomas, E. L. (2000) · Macromolecules · doi:10.1021/ma000513q · Cited by 174
Something new in the field of PLA/GA bioresorbable polymers?
Vert, M., Schwach, G., Engel, R., & Coudane, J. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00240-x · Cited by 173
Functional Lactide Monomers: Methodology and Polymerization
Gerhardt, W. W., Noga, D. E., Hardcastle, K. I., García, A. J., Collard, D. M., & Weck, M. (2006) · Biomacromolecules · doi:10.1021/bm060024j · Cited by 155
Hiki, S., Miyamoto, M., & Kimura, Y. (2000) · Polymer · doi:10.1016/s0032-3861(00)00086-0 · Cited by 134
Characterization of Polylactide-b-polyisoprene-b-polylactide Thermoplastic Elastomers
Frick, E. M., Zalusky, A. S., & Hillmyer, M. A. (2003) · Biomacromolecules · doi:10.1021/bm025628b · Cited by 121
Self-citationSipos, L., Zsuga, M., & Deák, G. (1995) · Macromolecular Rapid Communications · doi:10.1002/marc.1995.030161209 · Cited by 69
Ishimori, M., Tomoshige, T., & Tsuruta, T. (1968) · Die Makromolekulare Chemie · doi:10.1002/macp.1968.021200117 · Cited by 31
Durand, D., & Bruneau, C. M. (1979) · Macromolecules · doi:10.1021/ma60072a040 · Cited by 27
1. Polymerization of Vinylanthracene Monomers
Stolka, M., Yanus, J. F., & Pearson, J. M. (1976) · Macromolecules · doi:10.1021/ma60050a044 · Cited by 11
Nochmals zur Geschichte der Diazoniumsalze
Bamberger, E. (1899) · Berichte der deutschen chemischen Gesellschaft · doi:10.1002/cber.189903203152 · Cited by 9
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
(2000) · doi:10.1002/1521-3927(20001201)21:18
Self-citation
Research works printed but not linked: 20
- Albertsson A.-C., 2003, Biomacromolecules, 4, 1486
- For, 2001, Polymer, 42, 6219
- For, 1997, J. Appl. Polym. Sci., 66, 1505
- For, 1996, Macromol. Symp. 2000
- Frick E. M., 2000, Macromol. Rapid Commun., 21, 1322, 10.1002/1521-3927(20001201)21:18<1317::AID-MARC1317>3.0.CO;2-B · doi:10.1002/1521-3927(20001201)21:18<1317::aid-marc1317>3.0.co;2-b
- Huang L., 2007, Biomaterials, 28, 1751
- Zhang Z., 2004, Macromol. Chem. Phys., 205, 875
- Stridsberg K., 2000, Part A: Polym. Chem
- Kricheldorf H. R., 2005, Macromolecules, 38, 8226
- Wang Y., 2002, Nat. Biotechnol., 20, 606
- Zhang D., 2005, Biomacromolecules, 6, 2095
- Zhang D., 2004, Macromolecules, 37, 8200
- Zhang D., 2004, Macromolecules, 37, 5281
- Williams C. K., 2003, J. Am. Chem. Soc., 125, 11359
- Semenov A. N., 1985, Sov. Phys. JETP, 61, 733
- Matsen M. W., 1997, Part B: Polym. Phys
- See, 1996, Macromolecules, 29, 8370
- Honeker C. C., 2000, Macromolecules, 33, 9406
- Honeker C. C., 2000, Macromolecules, 33, 9417
- For, 2007, Macromolecules, 40, 1593
Cited by
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citationDegradable thermosets based on labile bonds or linkages: A review
Ma, S., & Webster, D. C. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.07.008 · Cited by 449
Synthesis of biodegradable polymers from renewable resources
Tschan, M. J.-L., Brulé, E., Haquette, P., & Thomas, C. M. (2012) · Polym. Chem. · doi:10.1039/c2py00452f · Cited by 428
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Brannigan, R. P., & Dove, A. P. (2017) · Biomaterials Science · doi:10.1039/c6bm00584e · Cited by 334
Metadata
- Authors
- Wanamaker, C. L., O'Leary, L. E., Lynd, N. A., Hillmyer, M. A., & Tolman, W. B.
- Affiliations
- University of Minnesota (US)
- Department of Chemistry, University of Minnesota, 207 Pleasant Street SE, Minneapolis, Minnesota 55455-0431
- Corresponding author
- Tolman, William B.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-10-26
- Volume
- 8
- Issue
- 11
- Pages
- 3634-3640
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1999907439
- Cited by
- 183
- References
- 15
- Citations by year
- 2026: 4 · 2025: 11 · 2024: 5 · 2023: 8 · 2022: 10 · 2021: 10 · 2020: 12 · 2019: 13 · 2018: 13 · 2017: 11 · 2016: 12 · 2015: 16 · 2014: 15 · 2013: 4 · 2012: 11
- FWCI
- 2.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Division of Chemistry
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- thermoplastic elastomers, polylactic acid, ring-opening polymerization, diethylene glycol, controlled polymerization, triblock copolymers, microphase separation, cylindrical morphology, mechanical properties, elastic recovery, bio-based polymers
- MeSH terms
- Calorimetry, Differential Scanning, Magnetic Resonance Spectroscopy, Plastics, Polyesters, Temperature, Molecular Structure, Elastomers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.