Renewable-Resource Thermoplastic Elastomers Based on Polylactide and Polymenthide
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
An alpha,omega-functionalized polymenthide was synthesized by the ring-opening polymerization of menthide in the presence of diethylene glycol with diethyl zinc as the catalyst. Termination with water afforded the dihydroxy polymenthide. The reaction of this telechelic polymer with triethylaluminum formed the corresponding aluminum alkoxide macroinitiator that was used for the controlled polymerization of lactide to yield biorenewable polylactide-b-polymenthide-b-polylactide triblock copolymers. The molecular weight and chemical composition were easily adjusted by the monomer-to-initiator ratios. Microphase separation in these triblock copolymers was confirmed by small-angle X-ray scattering and differential scanning calorimetry. A representative triblock was prepared with a hexagonally packed cylindrical morphology as determined by small-angle X-ray scattering, and tensile testing was employed to assess the mechanical behavior. On the basis of the ultimate elongations and elastic recovery, these triblock copolymers behaved as thermoplastic elastomers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The larger the number of branches, the better the property improvement.41,42”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
In the citing paper
“Six-arm star-branched random and block copolymers, for example, 6s-l-lactide-co-ε-CL (Tg: 0.2 °C) and 6s-l-lactide-b-ε-CL (Tg: +11 °C) having a similar comonomer composition and Mn < 30,000 were equally effective in improving the tensile toughness of the blend.”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
In the citing paper
“Star-branched copolymers showed a larger improvement of % elongation at break compared to linear polymers.”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [41]
Citations
Cites
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Holden, G., Bishop, E. T., & Legge, N. R. (1969) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070260104 · Cited by 310
Deformation of Oriented Lamellar Block Copolymer Films
Cohen, Y., Albalak, R. J., Dair, B. J., Capel, M. S., & Thomas, E. L. (2000) · Macromolecules · doi:10.1021/ma000513q · Cited by 174
Something new in the field of PLA/GA bioresorbable polymers?
Vert, M., Schwach, G., Engel, R., & Coudane, J. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00240-x · Cited by 173
Functional Lactide Monomers: Methodology and Polymerization
Gerhardt, W. W., Noga, D. E., Hardcastle, K. I., García, A. J., Collard, D. M., & Weck, M. (2006) · Biomacromolecules · doi:10.1021/bm060024j · Cited by 155
Hiki, S., Miyamoto, M., & Kimura, Y. (2000) · Polymer · doi:10.1016/s0032-3861(00)00086-0 · Cited by 134
Characterization of Polylactide-b-polyisoprene-b-polylactide Thermoplastic Elastomers
Frick, E. M., Zalusky, A. S., & Hillmyer, M. A. (2003) · Biomacromolecules · doi:10.1021/bm025628b · Cited by 121
Self-citationSipos, L., Zsuga, M., & Deák, G. (1995) · Macromolecular Rapid Communications · doi:10.1002/marc.1995.030161209 · Cited by 69
Ishimori, M., Tomoshige, T., & Tsuruta, T. (1968) · Die Makromolekulare Chemie · doi:10.1002/macp.1968.021200117 · Cited by 31
Research works printed but not linked: 20
- Albertsson A.-C., 2003, Biomacromolecules, 4, 1486
- For, 2001, Polymer, 42, 6219
- For, 1997, J. Appl. Polym. Sci., 66, 1505
- For, 1996, Macromol. Symp. 2000
- Frick E. M., 2000, Macromol. Rapid Commun., 21, 1322, 10.1002/1521-3927(20001201)21:18<1317::AID-MARC1317>3.0.CO;2-B · doi:10.1002/1521-3927(20001201)21:18<1317::aid-marc1317>3.0.co;2-b
- Huang L., 2007, Biomaterials, 28, 1751
- Zhang Z., 2004, Macromol. Chem. Phys., 205, 875
- Stridsberg K., 2000, Part A: Polym. Chem
- Kricheldorf H. R., 2005, Macromolecules, 38, 8226
- Wang Y., 2002, Nat. Biotechnol., 20, 606
- Zhang D., 2005, Biomacromolecules, 6, 2095
- Zhang D., 2004, Macromolecules, 37, 8200
- Zhang D., 2004, Macromolecules, 37, 5281
- Williams C. K., 2003, J. Am. Chem. Soc., 125, 11359
- Semenov A. N., 1985, Sov. Phys. JETP, 61, 733
- Matsen M. W., 1997, Part B: Polym. Phys
- See, 1996, Macromolecules, 29, 8370
- Honeker C. C., 2000, Macromolecules, 33, 9406
- Honeker C. C., 2000, Macromolecules, 33, 9417
- For, 2007, Macromolecules, 40, 1593
Cited by
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citationDegradable thermosets based on labile bonds or linkages: A review
Ma, S., & Webster, D. C. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.07.008 · Cited by 449
Synthesis of biodegradable polymers from renewable resources
Tschan, M. J.-L., Brulé, E., Haquette, P., & Thomas, C. M. (2012) · Polym. Chem. · doi:10.1039/c2py00452f · Cited by 428
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Brannigan, R. P., & Dove, A. P. (2017) · Biomaterials Science · doi:10.1039/c6bm00584e · Cited by 334
Wang, W., Lu, W., Goodwin, A., Wang, H., Yin, P., Kang, N.-G., Hong, K., & Mays, J. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.002 · Cited by 326
Aliphatic Polyester Block Polymer Design
Schneiderman, D. K., & Hillmyer, M. A. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00211 · Cited by 290
Self-citationSustainable Elastomers from Renewable Biomass
Wang, Z., Yuan, L., & Tang, C. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00209 · Cited by 234
From terpenes to sustainable and functional polymers
Della Monica, F., & Kleij, A. W. (2020) · Polymer Chemistry · doi:10.1039/d0py00817f · Cited by 210
Hernández, N., Williams, R. C., & Cochran, E. W. (2014) · Org. Biomol. Chem. · doi:10.1039/c3ob42339e · Cited by 194
Liu, Q., Jiang, L., Shi, R., & Zhang, L. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.001 · Cited by 203
Scalable production of mechanically tunable block polymers from sugar
Xiong, M., Schneiderman, D. K., Bates, F. S., Hillmyer, M. A., & Zhang, K. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1404596111 · Cited by 203
“offer exceptional mechanical properties (26, 27).”
Self-citationStrong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers
Watts, A., Kurokawa, N., & Hillmyer, M. A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00283 · Cited by 188
Self-citationWinnacker, M., & Rieger, B. (2015) · ChemSusChem · doi:10.1002/cssc.201500421 · Cited by 179
Pounder, R. J., & Dove, A. P. (2010) · Polymer Chemistry · doi:10.1039/b9py00327d · Cited by 168
Biobased building blocks for the rational design of renewable block polymers
Holmberg, A. L., Reno, K. H., Wool, R. P., & Epps, III (2014) · Soft Matter · doi:10.1039/c4sm01220h · Cited by 161
Pressure-Sensitive Adhesives from Renewable Triblock Copolymers
Shin, J., Martello, M. T., Shrestha, M., Wissinger, J. E., Tolman, W. B., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma102216d · Cited by 151
Self-citationA Facile Method for Generating Designer Block Copolymers from Functionalized Lignin Model Compounds
Holmberg, A. L., Stanzione, J. F., Wool, R. P., & Epps, T. H. I. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400497a · Cited by 149
Synthesis of Poly(lactide)s with Modified Thermal and Mechanical Properties
Becker, J. M., Pounder, R. J., & Dove, A. P. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000088 · Cited by 146
Thermoplastic Elastomers Derived from Menthide and Tulipalin A
Shin, J., Lee, Y., Tolman, W. B., & Hillmyer, M. A. (2012) · Biomacromolecules · doi:10.1021/bm3012852 · Cited by 139
Self-citationPolylactide–Poly(6-methyl-ε-caprolactone)–Polylactide Thermoplastic Elastomers
Martello, M. T., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma201063t · Cited by 137
Self-citationTunable and recyclable polyesters from CO2 and butadiene
Rapagnani, R. M., Dunscomb, R. J., Fresh, A. A., & Tonks, I. A. (2022) · Nature Chemistry · doi:10.1038/s41557-022-00969-2 · Cited by 139
Sustainable Thermoplastic Elastomers Derived from Fatty Acids
Shu, W., Kesava, S. V., Gomez, E. D., & Robertson, M. L. (2013) · Macromolecules · doi:10.1021/ma4011846 · Cited by 130
Martello, M. T., Schneiderman, D. K., & Hillmyer, M. A. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500412a · Cited by 120
Self-citationTough Polylactide Graft Copolymers
Theryo, G., Jing, F., Pitet, L. M., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma101155p · Cited by 116
Self-citationWanamaker, C. L., Bluemle, M. J., Pitet, L. M., O’Leary, L. E., Tolman, W. B., & Hillmyer, M. A. (2009) · Biomacromolecules · doi:10.1021/bm900721p · Cited by 116
Self-citationFunctional biorenewable polyesters from carvone-derived lactones
Lowe, J. R., Martello, M. T., Tolman, W. B., & Hillmyer, M. A. (2011) · Polym. Chem. · doi:10.1039/c0py00283f · Cited by 116
Self-citationMartello, M. T., Burns, A., & Hillmyer, M. (2012) · ACS Macro Letters · doi:10.1021/mz200006s · Cited by 113
Self-citationD’hooge, D., Steenberge, P. H. M. V., Derboven, P., Reyniers, M., & Marin, G. B. (2015) · Polymer Chemistry · doi:10.1039/c5py01069a · Cited by 119
Nagata, M., & Yamamoto, Y. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23333 · Cited by 107
Toughening Glassy Poly(lactide) with Block Copolymer Micelles
Li, T., Zhang, J., Schneiderman, D. K., Francis, L. F., & Bates, F. S. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00063 · Cited by 105
Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers
Schneiderman, D. K., Hill, E. M., Martello, M. T., & Hillmyer, M. A. (2015) · Polymer Chemistry · doi:10.1039/c5py00202h · Cited by 101
Self-citationSustainable thermoplastic elastomers derived from renewable cellulose, rosin and fatty acids
Liu, Y., Yao, K., Chen, X., Wang, J., Wang, Z., Ploehn, H. J., Wang, C., Chu, F., & Tang, C. (2013) · Polymer Chemistry · doi:10.1039/c3py01260c · Cited by 98
Terpene Based Elastomers: Synthesis, Properties, and Applications
Sahu, P., Bhowmick, A. K., & Kali, G. (2020) · Processes · doi:10.3390/pr8050553 · Cited by 95
Kobayashi, S., Lü, C., Hoye, T. R., & Hillmyer, M. A. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9027567 · Cited by 95
Self-citationRenewable, Degradable, and Chemically Recyclable Cross-Linked Elastomers
Brutman, J. P., De Hoe, G. X., Schneiderman, D. K., Le, T. N., & Hillmyer, M. A. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02931 · Cited by 92
Self-citationLignin and soy oil-derived polymeric biocomposites by “grafting from” RAFT polymerization
Xu, Y., Yuan, L., Wang, Z., Wilbon, P. A., Wang, C., Chu, F., & Tang, C. (2016) · Green Chemistry · doi:10.1039/c6gc00859c · Cited by 87
Multiblock Polyesters Demonstrating High Elasticity and Shape Memory Effects
Zhu, Y., Radlauer, M. R., Schneiderman, D. K., Shaffer, M. S. P., Hillmyer, M. A., & Williams, C. K. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02690 · Cited by 88
Self-citationZhou, C. Z., Wei, Z., Yu, Y., Shao, S., Leng, X., Wang, Y., & Li, Y. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.05.005 · Cited by 85
Synthesis of Terpene-Based Polymers
Zhao, J., & Schlaad, H. (2011) · Advances in polymer science · doi:10.1007/12_2011_166 · Cited by 80
Lowe, J. R., Tolman, W. B., & Hillmyer, M. A. (2009) · Biomacromolecules · doi:10.1021/bm900471a · Cited by 79
Self-citationLiffland, S., & Hillmyer, M. A. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01357 · Cited by 76
Self-citationGanewatta, M. S., Ding, W., Rahman, M. A., Yuan, L., Wang, Z., Hamidi, N., Robertson, M. L., & Tang, C. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01496 · Cited by 75
Toughening semicrystalline poly(lactic acid) by morphology alteration
Rathi, S., Chen, X., Coughlin, E. B., Hsu, S. L., Golub, C. S., & Tzivanis, M. J. (2011) · Polymer · doi:10.1016/j.polymer.2011.07.032 · Cited by 71
Panthani, T. R., & Bates, F. S. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01029 · Cited by 71
Hayashi, M., Noro, A., & Matsushita, Y. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201500663 · Cited by 69
Hydrolytic Degradation Behavior of a Renewable Thermoplastic Elastomer
Wanamaker, C. L., Tolman, W. B., & Hillmyer, M. A. (2009) · Biomacromolecules · doi:10.1021/bm801292v · Cited by 63
Self-citationYang, G., & Wu, G. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05084 · Cited by 63
Physical Aging of Polylactide-Based Graft Block Polymers
Haugan, I. N., Lee, B., Maher, M. J., Zografos, A., Schibur, H. J., Jones, S. D., Hillmyer, M. A., & Bates, F. S. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01434 · Cited by 62
Self-citationDroesbeke, M. A., & Prez, F. D. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01578 · Cited by 61
Sustainable terpene-based polyamides via anionic polymerization of a pinene-derived lactam
Winnacker, M., & Sag, J. (2018) · Chemical Communications · doi:10.1039/c7cc08266e · Cited by 60
Shen, Y., Zhang, J., Zhao, N., Liu, F., & Li, Z. (2018) · Polymer Chemistry · doi:10.1039/c8py00389k · Cited by 60
Watts, A., & Hillmyer, M. A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00411 · Cited by 59
Self-citationNasiri, M., Saxon, D. J., & Reineke, T. M. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02248 · Cited by 58
Kang, H., Hu, X., Li, M., Zhang, L., Wu, Y., Ning, N., & Tian, M. (2015) · RSC Advances · doi:10.1039/c4ra17024e · Cited by 57
“developed a series of biobased TPEs with polylactide as 3 the hard segments and polymenthide as the soft segments.[28] However, up to now, there is few 4 report on using a blending method to prepare TPVs from biobased polymers.”
MethodHigh-Performance Pressure-Sensitive Adhesives from Renewable Triblock Copolymers
Ding, K., John, A., Shin, J., Lee, Y., Quinn, T., Tolman, W. B., & Hillmyer, M. A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00754 · Cited by 58
Self-citationZhou, C. Y., Wei, Z., Lei, X., & Li, Y. (2016) · RSC Advances · doi:10.1039/c6ra08689f · Cited by 58
Synthesis of biodegradable thermoplastic elastomers from ε‐caprolactone and lactide
Nakayama, Y., Aihara, K., Yamanishi, H., Fukuoka, H., Tanaka, R., Cai, Z., & Shiono, T. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27463 · Cited by 55
Switchable Ring‐Opening Polymerization by a Ferrocene Supported Aluminum Complex
Lai, A. J., Hern, Z. C., & Diaconescu, P. L. (2019) · ChemCatChem · doi:10.1002/cctc.201900747 · Cited by 55
Synthesis and Postpolymerization Modification of One-Pot ω-Pentadecalactone Block-like Copolymers
Wilson, J. A., Hopkins, S. A., Wright, P. M., & Dove, A. P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00862 · Cited by 53
Noppalit, S., Simula, A., Billon, L., & Asúa, J. M. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b04820 · Cited by 51
Winnacker, M., Neumeier, M., Zhang, X., Papadakis, C. M., & Rieger, B. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600056 · Cited by 49
Gregory, G. L., & Williams, C. K. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00068 · Cited by 47
Cederholm, L., Olsén, P., Hakkarainen, M., & Odelius, K. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00274 · Cited by 47
Tannic acid: A sustainable crosslinking agent for high glass transition epoxy materials
Korey, M., Mendis, G., Youngblood, J. P., & Howarter, J. A. (2018) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29028 · Cited by 46
Biocatalytic Routes to Lactone Monomers for Polymer Production
Messiha, H. L., Ahmed, S. T., Karuppiah, V., Suardíaz, R., Avalos, G. A. A., Fey, N., Yeates, S. G., Toogood, H. S., Mulholland, A. J., & Scrutton, N. S. (2018) · Biochemistry · doi:10.1021/acs.biochem.8b00169 · Cited by 45
Polyurethanes based on renewable polyols from bioderived lactones
Gurusamy-Thangavelu, S. A., Emond, S. J., Kulshrestha, A., Hillmyer, M. A., Macosko, C. W., Tolman, W. B., & Hoye, T. R. (2012) · Polymer Chemistry · doi:10.1039/c2py20454a · Cited by 44
Self-citationBioderived and degradable polymers for transient electronics
Uva, A., Lin, A., Babi, J., & Tran, H. (2021) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.6790 · Cited by 42
Winnacker, M., Sag, J., Tischner, A., & Rieger, B. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600787 · Cited by 41
Mahajan, M. S., & Gite, V. V. (2021) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2021.106534 · Cited by 42
Zhu, X., Yang, G., Xie, R. J., & Wu, G. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202115189 · Cited by 42
Qi, F., Tang, M., Chen, X., Chen, M., Guo, G. F., & Zhang, Z. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.08.008 · Cited by 41
Block Copolymer Pressure-Sensitive Adhesives Derived from Fatty Acids and Triacetic Acid Lactone
Sajjad, H., Tolman, W. B., & Reineke, T. M. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00317 · Cited by 43
Self-citationYang, X., Zhang, W., Huang, H., Dai, J., Wang, M., Fan, H., Cai, Z., Zhang, Q., & Zhu, J. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02555 · Cited by 40
Pu, G., Dubay, M. R., Zhang, J., Severtson, S. J., & Houtman, C. J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301492v · Cited by 40
Zhang, M., Moore, R. B., & Long, T. E. (2012) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26176 · Cited by 38
Wang, W., Zhang, J., Jiang, F. D., Wang, X., & Wang, Z. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00277 · Cited by 38
PLA Block Polymers: Versatile Materials for a Sustainable Future
Krajovic, D. M., Kumler, M. S., & Hillmyer, M. A. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00161 · Cited by 35
Self-citationThermoplastic polyester elastomers based on long-chain crystallizable aliphatic hard segments
Stempfle, F., Schemmer, B., Oechsle, A.-L., & Mecking, S. (2015) · Polymer Chemistry · doi:10.1039/c5py01209k · Cited by 34
Kang, H., Miao, X., Li, J., Li, D., & Fang, Q. (2021) · RSC Advances · doi:10.1039/d1ra00066g · Cited by 33
Principles of Step-Growth Polymerization (Polycondensation and Polyaddition)
Zhang, M., June, S. M., & Long, T. E. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00131-x · Cited by 47
Huang, Y., Pan, P., Shan, G., & Bao, Y. (2014) · RSC Advances · doi:10.1039/c4ra08612k · Cited by 34
Zhu, Y., Romain, C., Poirier, V., & Williams, C. K. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00225 · Cited by 35
Jing, Z., Shi, X., Zhang, G., & Gu, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.019 · Cited by 32
Liu, J., Blosch, S. E., Volokhova, A. S., Crater, E. R., Gallin, C. F., Moore, R. B., Matson, J. B., & Byers, J. A. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202317699 · Cited by 32
Ojha, U., Kulkarni, P. P., Singh, J., & Faust, R. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23428 · Cited by 33
Winnacker, M., Tischner, A., Neumeier, M., & Rieger, B. (2015) · RSC Advances · doi:10.1039/c5ra15656d · Cited by 30
Enzymatic Synthesis and Chemical Recycling of Novel Polyester-Type Thermoplastic Elastomers
Yagihara, T., & Matsumura, S. (2012) · Polymers · doi:10.3390/polym4021259 · Cited by 30
“In the field of elastomers, environmentally benign properties become more important [4,5].”
BackgroundPresent Situation and Future Perspectives of Poly(lactic acid)
Masutani, K., & Kimura, Y. (2017) · Advances in polymer science · doi:10.1007/12_2016_16 · Cited by 36
Baek, S., & Hwang, S. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1510-5 · Cited by 27
Multienzymatic Processes Involving Baeyer–Villiger Monooxygenases
de Gonzalo, G., & Alcántara, A. R. (2021) · Catalysts · doi:10.3390/catal11050605 · Cited by 27
Wanamaker, C. L., Tolman, W. B., & Hillmyer, M. A. (2009) · Macromolecular Symposia · doi:10.1002/masy.200950917 · Cited by 26
Self-citationNi, C., Luo, R., Xu, K., & Chen, G. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29182 · Cited by 30
High‐Performance Recyclable Polyester Elastomers Through Transient Strain‐Stiffening
Gao, C., Poon, K. C., Concilio, M., Zinn, T., Gregory, G. L., & Williams, C. K. (2025) · Advanced Materials · doi:10.1002/adma.202416674 · Cited by 26
Toward a greener future: Exploring sustainable thermoplastic elastomers
Jeon, J. H., Jung, J. H., & Choi, C. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230293 · Cited by 26
Renewable carvone-based polyols for use in polyurethane thermosets
Knight, S. C., Schaller, C. P., Tolman, W. B., & Hillmyer, M. A. (2013) · RSC Advances · doi:10.1039/c3ra44084b · Cited by 26
Self-citationLi, S., Zeng, J., Wu, F., Yang, Y., & Wang, Y. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402499t · Cited by 24
All-Polyhydroxyalkanoate Triblock Copolymers via a Stereoselective-Chemocatalytic Route
Westlie, A. H., Hesse, S. A., Tang, X., Quinn, E. C., Parker, C. R., Takacs, C. J., Tassone, C. J., & Chen, E. Y.-X. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.3c00162 · Cited by 23
Hazer, B., Baysal, B. M., Köseoğlu, A. G., Beşırlı, N., & Taşkın, E. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0406-1 · Cited by 24
Synthesis and properties of cationic ionomers from poly(ester-urethane)s based on polylactide
Nakayama, Y., Inaba, T., Toda, Y., Tanaka, R., Cai, Z., Shiono, T., Shirahama, H., & Tsutsumi, C. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26857 · Cited by 23
Metadata
- Authors
- Wanamaker, C. L., O'Leary, L. E., Lynd, N. A., Hillmyer, M. A., & Tolman, W. B.
- Affiliations
- University of Minnesota (US)
- Department of Chemistry, University of Minnesota, 207 Pleasant Street SE, Minneapolis, Minnesota 55455-0431
- Corresponding author
- Tolman, William B.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-10-26
- Volume
- 8
- Issue
- 11
- Pages
- 3634-3640
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1999907439
- Cited by
- 183
- References
- 15
- Citations by year
- 2026: 4 · 2025: 11 · 2024: 5 · 2023: 8 · 2022: 10 · 2021: 10 · 2020: 12 · 2019: 13 · 2018: 13 · 2017: 11 · 2016: 12 · 2015: 16 · 2014: 15 · 2013: 4 · 2012: 11
- FWCI
- 2.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Division of Chemistry
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- thermoplastic elastomers, polylactic acid, ring-opening polymerization, diethylene glycol, controlled polymerization, triblock copolymers, microphase separation, cylindrical morphology, mechanical properties, elastic recovery, bio-based polymers
- MeSH terms
- Calorimetry, Differential Scanning, Magnetic Resonance Spectroscopy, Plastics, Polyesters, Temperature, Molecular Structure, Elastomers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.