A High Strength Nanocomposite Based on Microcrystalline Cellulose and Polyurethane
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
A high-strength elastomeric nanocomposite has successfully been prepared by dispersing microcrystalline cellulose in a polyurethane matrix. The resulting nanocomposites show increased strain-to-failure in addition to increased stiffness and strength compared to the unfilled polyurethane. The optimal composite contained 5 wt % cellulose. The average true strength for this composition was 257 MPa, compared with 39 MPa for the neat polyurethane, and showed the highest strain-to-failure. The improvements of stiffness, strength, as well as strain-to-failure are believed to be due to good interaction, by both covalent and hydrogen bonds, between the polyurethane and the cellulose nanofibrils.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Moreover, recently, Wu et al. [137] demonstrated that only a low percentage of MFC (5 wt%) was enough to improve the modulus of the PU matrix by approximately 200% at 5 ° C, while at 85 ° C an increase close to 500% was observed.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [137]
In the citing paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [137]
Citations
Cites
Deformation and fracture mechanics of engineering materials
Deighton, M. (1984) · Materials & Design · doi:10.1016/0261-3069(84)90070-0 · Cited by 1,522
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Mathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Nanolayer Reinforcement of Elastomeric Polyurethane
Wang, Z., & Pinnavaia, T. J. (1998) · Chemistry of Materials · doi:10.1021/cm980448n · Cited by 770
Tsagaropoulos, G., & Eisenberg, A. (1995) · Macromolecules · doi:10.1021/ma00122a011 · Cited by 647
Reinforcement Mechanism of Nanofilled Polymer Melts As Elucidated by Nonlinear Viscoelastic Behavior
Sternstein, S. S., & Zhu, A.-J. (2002) · Macromolecules · doi:10.1021/ma020482u · Cited by 539
Synthesis and characterization of novel segmented polyurethane/clay nanocomposites
Chen, T. (2000) · Polymer · doi:10.1016/s0032-3861(99)00280-3 · Cited by 473
New Nanocomposite Materials Reinforced with Flax Cellulose Nanocrystals in Waterborne Polyurethane
Cao, X., Dong, H., & Li, C. M. (2007) · Biomacromolecules · doi:10.1021/bm0610368 · Cited by 462
Woods, G. T. (1987) · Medical Entomology and Zoology · Cited by 398
Research works printed but not linked: 6
- Wainwright, S. A.; Biggs, W. D.; Currey, J. D.; Gosline, J. M.Mechanical Design in Organisms,1st ed.;Princeton University Press: Princeton,1982; pp94–95.
- Battista O. A., 1975, Microcrystal Polymer Science
- Wu Q., 2002, 23rd Risø International Symposium on Material Science: Sustainable Natural and Polymeric Composites: Science and Technology, 107.
- Morgenstern B., 1996, Trends Polym. Sci., 4, 87
- Hull, D.An Introduction to Composite Materials,1st ed.;Cambridge Solid State Science Series;Cambridge University Press:Cambridge, U.K.,1993; pp87−91,150.
- Laka M. S., 2003, Cellul. Chem. Technol., 37, 69
Cited by
Items 101–200 of 267
Thermal analysis and crystallinity study of cellulose nanofibril-filled polypropylene composites
Yang, H., Kızıltaş, A., & Gardner, D. J. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2770-z · Cited by 53
Bi, H., Ren, Z., Ye, G., Sun, H. Y., Guo, R., Jia, X., & Xu, M. (2020) · Cellulose · doi:10.1007/s10570-020-03328-x · Cited by 49
Pereda, M., Marcovich, N. E., & Ansorena, M. R. (2019) · Springer eBooks · doi:10.1007/978-3-319-68255-6_30 · Cited by 48
Khadivi, P., Salami‐Kalajahi, M., Roghani‐Mamaqani, H., & Sofla, R. L. M. (2019) · Applied Physics A · doi:10.1007/s00339-019-3082-y · Cited by 45
Głowińska, E., & Datta, J. (2015) · Cellulose · doi:10.1007/s10570-015-0685-0 · Cited by 45
Mathew, A. P., Gong, G., Björngrim, N., Wixe, D., & Oksman, K. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22063 · Cited by 45
Wu, Q., Li, X., Fu, S., Li, Q., & Wang, S. (2017) · Cellulose · doi:10.1007/s10570-017-1341-7 · Cited by 47
Self-citationMicrocrystalline cellulose as reinforcing agent in silicone elastomers
Deng, S., Binauld, S., Mangiante, G., Frances, J.-M., Charlot, A., Bernard, J., Zhou, X. D., & Fleury, É. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.035 · Cited by 43
Marquez-Bravo, S., Doench, I., Molina, P., Bentley, F. E., Tamo, A. K., Passieux, R., Lossada, F., David, L., & Osorio‐Madrazo, A. (2021) · Polymers · doi:10.3390/polym13101563 · Cited by 43
Hou, X., Liu, Z., Wei, Y., Zhao, Q. C., Dong, J., Liu, B., Sun, Z., Shi, T., Zhang, M., & Hu, W. Q. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2017.08.019 · Cited by 42
Effect of inter-fibre bonding on the fracture of fibrous networks with strong interactions
Goutianos, S., Mao, R., & Peijs, T. (2017) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.12.020 · Cited by 43
Nanocellulose reinforced as green agent in polymer matrix composites applications
Rashid, E. S. A., Julkapli, N. M., & Yehye, W. A. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4264 · Cited by 43
Bhiogade, A., & Kannan, M. (2021) · Polymers and Polymer Composites · doi:10.1177/0967391120987170 · Cited by 44
A Bio-based healable/renewable polyurethane elastomer derived from L-Tyrosine/Vanillin/Dimer acid
Xu, B., Yin, Q., Han, F., Cheng, J., Zhao, J., & Zhang, J. (2022) · Chemical Engineering Science · doi:10.1016/j.ces.2022.117736 · Cited by 41
Meng, J.-F., Song, B.-Y., Li, F., & Li, T.-H. (2023) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.101371 · Cited by 40
Oprea, Ș., Potolinca, V. O., Grădinariu, P., Joga, A., & Oprea, V. (2016) · Cellulose · doi:10.1007/s10570-016-0972-4 · Cited by 40
Nanocellulose‐Based Polymer Nanocomposite: Isolation, Characterization and Applications
Khalil, H. P. S. A., Davoudpour, Y., Aprilia, N. A. S., Mustapha, A., Hossain, S., Islam, N., & Dungani, R. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch11 · Cited by 45
Mechanical activation and characterization of micronized cellulose particles from pulp fiber
Huang, L., Wu, Q., Wang, Q., & Wolcott, M. P. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111750 · Cited by 39
Self-citationOlszewska, A., Junka, K., Nordgren, N., Laine, J., Rutland, M. W., & Österberg, M. (2013) · Soft Matter · doi:10.1039/c3sm50578b · Cited by 45
Lee, M., Heo, M. H., Lee, H.-H., Kim, Y., & Shin, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.019 · Cited by 40
Fallon, J. J., Kolb, B. Q., Herwig, C., Foster, E. J., & Bortner, M. J. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46992 · Cited by 40
Viscoelasticity and water plasticization of polymer-cellulose composite films and paper sheets
Myllytie, P., Salmén, L., Haimi, E., & Laine, J. (2009) · Cellulose · doi:10.1007/s10570-009-9376-z · Cited by 41
Iqbal, H. M. N., Kyazze, G., Tron, T., & Keshavarz, T. (2014) · Cellulose · doi:10.1007/s10570-014-0337-9 · Cited by 37
Review of Nanocellulosic Products and Their Applications
Aspler, J., Bouchard, J., Hamad, W. Y., Berry, R. P., Beck, S., Drolet, F., & Zou, X. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch20 · Cited by 40
Designing pH-responsive and dielectric hydrogels from cellulose nanocrystals
Gao, X., Sadasivuni, K. K., Kim, H. C., MIN, S.-K., & Kim, J. (2015) · Journal of Chemical Sciences · doi:10.1007/s12039-015-0873-3 · Cited by 36
dos Santos, F. A., & Tavares, M. I. B. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.08.008 · Cited by 35
Novel double-networked polyurethane composites with multi-stimuli responsive functionalities
Cai, C., Wei, Z., Wang, X., Mei, C., Fu, Y., & Zhong, W. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05969a · Cited by 35
Lignocellulosic reinforced composites: a snapshot of progress
Kader, A. H. A., Fahmy, T. Y. A., & Kamel, S. M. (2025) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2025.2538620 · Cited by 36
Starch Plastic Packaging and Agriculture Applications
Glenn, G. M., Orts, W. J., Imam, S., Chiou, B., & Wood, D. F. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-53730-0.00032-4 · Cited by 34
Lipid functionalized biopolymers: A review
Qurat-ul-Ain, Q.-U.-A., Zia, K. M., Zia, F., Ali, M., Rehman, S., & Zuber, M. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.09.071 · Cited by 33
Nanotechnological Applications in Food Packaging, Sensors and Bioactive Delivery Systems
Purkayastha, M. D., & Manhar, A. K. (2016) · Sustainable agriculture reviews · doi:10.1007/978-3-319-39306-3_3 · Cited by 39
Jasiūnas, L., Peck, G., Bridžiuvienė, D., & Miknius, L. (2020) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2020.102618 · Cited by 32
Different degree of fibrillation: strategy to reduce permeability in nanocellulose-starch films
Lengowski, E. C., Júnior, E. A. B., Simon, L. C., de Muñiz, G. I. B., de Andrade, A. S., Nisgoski, S., & Klock, U. (2020) · Cellulose · doi:10.1007/s10570-020-03232-4 · Cited by 32
Liu, Y., Li, L., Pan, N., Wang, Y., Ren, X., Xie, Z., Buschle‐Diller, G., & Huang, T. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3906 · Cited by 32
Jasiūnas, L., McKenna, S. T., Bridžiuvienė, D., & Miknius, L. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01686-y · Cited by 32
Elanthikkal, S., Unnikrishnan, G. P., Varghese, S., Guthrie, J. T., & Francis, T. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.039 · Cited by 31
Vadillo, J., Larraza, I., Calvo‐Correas, T., Gabilondo, N., Dérail, C., & Eceiza, A. (2021) · Cellulose · doi:10.1007/s10570-021-03826-6 · Cited by 31
Changsarn, S., Mendez, J. D., Shanmuganathan, K., Foster, E. J., Weder, C., & Supaphol, P. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100183 · Cited by 32
Bio-based nanocomposites by in situ cure of phenolic prepolymers with cellulose whiskers
Liu, H., & Laborie, M. G. (2011) · Cellulose · doi:10.1007/s10570-011-9499-x · Cited by 30
Preparation and characterization of the bacterial cellulose/polyurethane nanocomposites
Pinto, E. R. P., Barud, H. D. S., Polito, W., Ribeiro, S. J. L., & Messaddeq, Y. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3001-y · Cited by 29
Shi, Z., Huang, J., Liu, C., Ding, B., Kuga, S., Cai, J., & Zhang, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06232 · Cited by 29
Kim, Y., Park, J., Jeong, H. S., Park, M., Baik, S., Lee, D. S., Rho, H., Kim, H., Lee, J. H., Kim, S. M., et al. (2019) · Nanoscale · doi:10.1039/c8nr10446h · Cited by 28
Lossada, F., Jiao, D., Guo, J., Hoenders, D., Eckert, A., & Walther, A. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00774 · Cited by 28
Kim, Y., Huh, P., & Yoo, S. I. (2023) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202200383 · Cited by 28
A novel antistatic polyurethane hybrid based on nanoscale ionic material
He, H., Yan, Y., Qiu, Z., & Tan, X. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2017.09.004 · Cited by 27
Bhagavathi, L. R., Deshpande, A. P., Ram, G. D. J., & Panigrahi, S. K. (2021) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2021.102871 · Cited by 28
Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals
Ma, L., Wang, L., Wu, L., Zhuo, D., Weng, Z., & Ren, R. (2014) · Cellulose · doi:10.1007/s10570-014-0405-1 · Cited by 28
Lignin-based polyurethane film reinforced with cellulose nanocrystals
Xue, B., Wen, J., Zhu, M.-Q., & Sun, R. (2014) · RSC Advances · doi:10.1039/c4ra04461d · Cited by 26
ADVANCED FUNCTIONAL MATERIALS BASED ON CELLULOSE
Zhang, J., & Zhang, J. P. (2010) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2010.10238 · Cited by 26
Tsou, C., Lee, H.-T., Hung, W., Guzman, M. D., Chen, S.-T., Suen, M., & Wicaksono, S. T. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1767-3 · Cited by 26
Qiao, Q., Li, X., & Huang, L. (2019) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.9b00701 · Cited by 27
Modification of microcrystalline cellulose by using soybean oil for surface hydrophobization
Dong, X., Yan, D. M., Jiang, M., Wang, L., Tong, J., & Zhou, J. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.02.010 · Cited by 25
Cellulose nanowhisker-incorporated poly(lactic acid) composites for high thermal stability
Cho, S. Y., Park, H. H., Yun, Y. S., & Jin, H. (2013) · Fibers and Polymers · doi:10.1007/s12221-013-1001-y · Cited by 28
Bhagavathi, L. R., Deshpande, A. P., Ram, G. D. J., & Panigrahi, S. K. (2020) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2020.102771 · Cited by 25
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Polymer Engineering and Science · doi:10.1002/pen.24447 · Cited by 24
Cui, X., Hiraoka, T., Honda, T., Hsu, Y., Asoh, T., & Uyama, H. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108595 · Cited by 26
Sliozberg, Y. R., Chantawansri, T. L., Lenhart, J. L., & Andzelm, J. (2014) · Polymer · doi:10.1016/j.polymer.2014.08.063 · Cited by 24
Tian, C., Fu, S., Chen, J., Meng, Q., & Lucia, L. A. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p058-068 · Cited by 24
Guo, Y., An, X., & Qian, X. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.116247 · Cited by 23
Nanosized cellulose derivatives as green reinforcing agents at higher loadings in natural rubber
Thakore, S. I. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40632 · Cited by 23
Polysaccharide-based natural and synthetic nanocomposites
Bogdanova, O. I., & Чвалун, С. Н. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16050047 · Cited by 23
Zhai, L., Park, J., Lee, J. Y., Kim, D., & Kim, J. (2017) · International Journal of Polymeric Materials · doi:10.1080/00914037.2017.1342247 · Cited by 22
Goutianos, S., Arévalo, R., Sørensen, B. F., & Peijs, T. (2014) · Applied Composite Materials · doi:10.1007/s10443-013-9381-0 · Cited by 22
Cellulose nanofiber-reinforced silk fibroin composite film with high transparency
Cho, S. Y., Lee, M. E., Choi, Y., & Jin, H. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-0215-y · Cited by 23
Polymer Composites: Reinforcing Fillers
Pegoretti, A., & Dorigato, A. (2019) · Wiley eBooks · doi:10.1002/0471440264.pst130.pub2 · Cited by 22
Green Composites From Soy‐Based Biopolyurethane With Microcrystalline Cellulose
Luo, X., Mohanty, A. K., & Misra, M. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200030 · Cited by 21
Strong Aqueous Gels of Cellulose Nanofibers and Nanowhiskers Isolated from Softwood Flour
Gong, G., Mathew, A. P., & Oksman, K. (2011) · TAPPI Journal · doi:10.32964/tj10.2.7 · Cited by 20
Yang, H., Gardner, D. J., & Nader, J. W. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38513 · Cited by 20
Sonseca, Á., Sahuquillo, Ó., Foster, E. J., & Giménez, E. (2015) · RSC Advances · doi:10.1039/c5ra06768e · Cited by 19
Filson, P. B., & Dawson-Andoh, B. E. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.12.067 · Cited by 19
Bio‐based polyurethane films using white dextrins
Konieczny, J., & Loos, K. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47454 · Cited by 19
Melt-Spun Nanocomposite Fibers Reinforced with Aligned Tunicate Nanocrystals
Redondo, A., Chatterjee, S., Brodard, P., Korley, L. T. J., Weder, C., Gunkel, I., & Steiner, U. (2019) · Polymers · doi:10.3390/polym11121912 · Cited by 19
Water‐Blown Rigid Biofoams from Soy‐Based Biopolyurethane and Microcrystalline Cellulose
Luo, X., Mohanty, A. K., & Misra, M. (2012) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-012-2100-4 · Cited by 18
Preparation and characterization of antimicrobial films based on nanocrystalline cellulose
Zhang, Y., Liu, Y., Li, R., Ren, X., & Huang, T. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47101 · Cited by 18
Huang, G., & Chen, F. (2019) · Cellulose · doi:10.1007/s10570-019-02612-9 · Cited by 18
Cataldi, A., Dorigato, A., Deflorian, F., & Pegoretti, A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40741 · Cited by 18
Zhang, Y., Zhou, H., Wang, L., Jiang, W., Soucek, M. D., & Yi, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45532 · Cited by 18
Preparation and properties of self-healing polyurethane based on disulfide and hydrogen bonding
Liu, S., Chen, Y., Qiao, Y., Li, Z., & Wei, Y. (2022) · Carbon letters · doi:10.1007/s42823-022-00413-y · Cited by 17
Huang, T., Kwan, I., Li, D., & Ek, M. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.105894 · Cited by 17
Lessan, F., Karimi, M. B., & Arami, M. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1034-1 · Cited by 17
Cheng, W., He, J., Chen, M., Li, D., Li, H., Chen, L., Cao, Y., Wang, J., & Huang, Y. (2016) · Fibers and Polymers · doi:10.1007/s12221-016-6279-0 · Cited by 17
Kwon, Y. R., Kim, H.-C., Kim, J. S., So, J., Chang, Y., & Kim, D. H. (2022) · Polymers · doi:10.3390/polym14194062 · Cited by 16
Mechanical performance of polyurethane (PU)-based biocomposites
Aranguren, M. I., Marcovich, N. E., & Mosiewicki, M. A. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-373-7.00010-x · Cited by 16
Cellulose nano-biocomposites from high oleic sunflower oil-derived thermosets
Moreno, M., Armentano, I., Fortunati, E., Mattioli, S., Torre, L., Lligadas, G., Ronda, J. C., Galià, M., & Cádiz, V. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.018 · Cited by 16
Mosiewicki, M. A., Casado, U., Marcovich, N. E., & Aranguren, M. I. (2012) · Journal of Polymer Research · doi:10.1007/s10965-011-9776-2 · Cited by 16
Wondu, E., Lule, Z. C., & Kim, J. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.101287 · Cited by 14
Surfactant effects on poly(ethylene-co-vinyl acetate)/cellulose composites
Elanthikkal, S., Unnikrishnan, G. P., Varghese, S., & Guthrie, J. T. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.10.009 · Cited by 14
Deepalekshmi, P., Visakh, P. M., Mathew, A. P., Chandra, A. K., & Thomas, S. (2013) · Advanced structured materials · doi:10.1007/978-3-642-20928-4_1 · Cited by 13
Kenny, J. M., Torre, L., & Chiacchiarelli, L. M. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42750 · Cited by 13
Luo, X., Yu, Z., Cai, Y., Wu, Q., & Zeng, J. (2019) · Polymers · doi:10.3390/polym11050763 · Cited by 13
Self-citationWang, X., Shen, Y., Lai, X., Liu, G., & Du, Y. (2014) · Journal of Polymer Research · doi:10.1007/s10965-014-0367-x · Cited by 13
Yun, Y. S., Cho, S. Y., & Jin, H. (2010) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421401003609897 · Cited by 12
Castor oil-based biopolyurethane reinforced with wood microfibers derived from mechanical pulp
Visanko, M., Sirviö, J. A., Piltonen, P., Liimatainen, H., & Illikainen, M. (2017) · Cellulose · doi:10.1007/s10570-017-1286-x · Cited by 12
Pereda, M., Marcovich, N. E., & Ansorena, M. R. (2017) · Springer eBooks · doi:10.1007/978-3-319-48281-1_30-1 · Cited by 14
Three-Dimensional-Printed Shape Memory Biomass Composites for Thermal-Responsive Devices
Bi, H., Jia, X., Ye, G., Ren, Z., Yang, H., Guo, R., Xu, M., Cai, L., & Huang, Z. (2020) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2020.0003 · Cited by 11
Castor Oil and Microcrystalline Cellulose Based Polymer Composites with High Tensile Strength
Miao, S. D., Liu, Y. Y., Wang, P., & Zhang, S. P. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.399-401.1531 · Cited by 11
Wei, S., Meng, L., Liu, W., Guo, S., & Zhang, X. (2019) · Materials Research · doi:10.1590/1980-5373-mr-2018-0278 · Cited by 11
Loh, T. W., Tran, P., Das, R. K., Ladani, R. B., & Orifici, A. C. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100465 · Cited by 11
Morphological Characteristics of Cellulose Nanofibril-Filled Polypropylene Composites
Yang, H., & Gardner, D. J. (2011) · Wood and Fiber Science (Society of Wood Science and Technology) · Cited by 10
Jo, C., Kim, S. S., Ramalingam, S., S, P. D., Rukmanikrishnan, B., & Lee, J. (2022) · Gels · doi:10.3390/gels8040248 · Cited by 10
Metadata
- Authors
- Wu, Q., Henriksson, M., Liu, X., & Berglund, L. A.
- Affiliations
- KTH Royal Institute of Technology (SE)
- Corresponding author
- Berglund, Lars A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-11-21
- Volume
- 8
- Issue
- 12
- Pages
- 3687-3692
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1982802452
- Cited by
- 265
- References
- 37
- Citations by year
- 2026: 4 · 2025: 6 · 2024: 6 · 2023: 6 · 2022: 11 · 2021: 9 · 2020: 14 · 2019: 19 · 2018: 10 · 2017: 17 · 2016: 23 · 2015: 19 · 2014: 29 · 2013: 26 · 2012: 16
- FWCI
- 4.73
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Keywords
- microcrystalline cellulose, polyurethane, rubber nanocomposites, cellulose nanofibers, mechanical strength, failure strain, stiffness, hydrogen bonding, covalent bonding
- MeSH terms
- Cellulose, Polyurethanes, Stress, Mechanical, Compressive Strength, Nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.