A High Strength Nanocomposite Based on Microcrystalline Cellulose and Polyurethane
The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
A high-strength elastomeric nanocomposite has successfully been prepared by dispersing microcrystalline cellulose in a polyurethane matrix. The resulting nanocomposites show increased strain-to-failure in addition to increased stiffness and strength compared to the unfilled polyurethane. The optimal composite contained 5 wt % cellulose. The average true strength for this composition was 257 MPa, compared with 39 MPa for the neat polyurethane, and showed the highest strain-to-failure. The improvements of stiffness, strength, as well as strain-to-failure are believed to be due to good interaction, by both covalent and hydrogen bonds, between the polyurethane and the cellulose nanofibrils.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Moreover, recently, Wu et al. [137] demonstrated that only a low percentage of MFC (5 wt%) was enough to improve the modulus of the PU matrix by approximately 200% at 5 ° C, while at 85 ° C an increase close to 500% was observed.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [137]
In the citing paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [137]
Citations
Cites
Deformation and fracture mechanics of engineering materials
Deighton, M. (1984) · Materials & Design · doi:10.1016/0261-3069(84)90070-0 · Cited by 1,522
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Mathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Nanolayer Reinforcement of Elastomeric Polyurethane
Wang, Z., & Pinnavaia, T. J. (1998) · Chemistry of Materials · doi:10.1021/cm980448n · Cited by 770
Tsagaropoulos, G., & Eisenberg, A. (1995) · Macromolecules · doi:10.1021/ma00122a011 · Cited by 647
Reinforcement Mechanism of Nanofilled Polymer Melts As Elucidated by Nonlinear Viscoelastic Behavior
Sternstein, S. S., & Zhu, A.-J. (2002) · Macromolecules · doi:10.1021/ma020482u · Cited by 539
Synthesis and characterization of novel segmented polyurethane/clay nanocomposites
Chen, T. (2000) · Polymer · doi:10.1016/s0032-3861(99)00280-3 · Cited by 473
New Nanocomposite Materials Reinforced with Flax Cellulose Nanocrystals in Waterborne Polyurethane
Cao, X., Dong, H., & Li, C. M. (2007) · Biomacromolecules · doi:10.1021/bm0610368 · Cited by 462
Woods, G. T. (1987) · Medical Entomology and Zoology · Cited by 398
Research works printed but not linked: 6
- Wainwright, S. A.; Biggs, W. D.; Currey, J. D.; Gosline, J. M.Mechanical Design in Organisms,1st ed.;Princeton University Press: Princeton,1982; pp94–95.
- Battista O. A., 1975, Microcrystal Polymer Science
- Wu Q., 2002, 23rd Risø International Symposium on Material Science: Sustainable Natural and Polymeric Composites: Science and Technology, 107.
- Morgenstern B., 1996, Trends Polym. Sci., 4, 87
- Hull, D.An Introduction to Composite Materials,1st ed.;Cambridge Solid State Science Series;Cambridge University Press:Cambridge, U.K.,1993; pp87−91,150.
- Laka M. S., 2003, Cellul. Chem. Technol., 37, 69
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Self-citationCellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
BackgroundNanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
Xu, X., Liu, F., Jiang, L., Zhu, J. Y., Haagenson, D., & Wiesenborn, D. P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302624t · Cited by 1,002
Metadata
- Authors
- Wu, Q., Henriksson, M., Liu, X., & Berglund, L. A.
- Affiliations
- KTH Royal Institute of Technology (SE)
- Corresponding author
- Berglund, Lars A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-11-21
- Volume
- 8
- Issue
- 12
- Pages
- 3687-3692
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1982802452
- Cited by
- 265
- References
- 37
- Citations by year
- 2026: 4 · 2025: 6 · 2024: 6 · 2023: 6 · 2022: 11 · 2021: 9 · 2020: 14 · 2019: 19 · 2018: 10 · 2017: 17 · 2016: 23 · 2015: 19 · 2014: 29 · 2013: 26 · 2012: 16
- FWCI
- 4.73
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Keywords
- microcrystalline cellulose, polyurethane, rubber nanocomposites, cellulose nanofibers, mechanical strength, failure strain, stiffness, hydrogen bonding, covalent bonding
- MeSH terms
- Cellulose, Polyurethanes, Stress, Mechanical, Compressive Strength, Nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.