Biodegradable Thermoplastic Polyurethanes Incorporating Polyhedral Oligosilsesquioxane
The DOI matches its Crossref record; 64 of the 65 references it cites were found in a registry or an index.
Abstract
A new hybrid thermoplastic polyurethane (TPU) system that incorporates an organic, biodegradable poly(D, L-lactide) soft block with a hard block bearing the inorganic polyhedral oligosilsesquioxane (POSS) moiety is introduced and studied. Changes in the polyol composition made through variation of the hydrophilic initiator molecular weight show direct control of the final transition temperatures. Incorporating POSS into the hard segments allows for excellent elasticity above T(g), as evidenced with dynamic mechanical analysis, not seen in most other biodegradable materials. This elasticity is attributed to physical cross-links formed in the hard block through POSS crystallization, as revealed with wide-angle X-ray diffraction. Increasing the POSS incorporation level in the TPU hard block was observed to increase crystallinity and also the rigidity of the material. The highest incorporation, using a statistical average of three POSS units per hard block, demonstrated one-way shape memory with excellent shape fixing capabilities. In vitro degradation of this sample was also investigated during a two month period. Moderate water uptake and dramatic molecular weight decrease were immediately observed although large mass loss (approximately 20 wt %) was not observed until the two month time point.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Self-citationMark, J. E. (2009) · Cited by 1,658
Hybrid materials : synthesis, characterization, and applications
Kickelbick, G. (2007) · Cited by 755
Aliphatic Polyesters: Great Degradable Polymers That Cannot Do Everything
Vert, M. (2005) · Biomacromolecules · doi:10.1021/bm0494702 · Cited by 565
Hybrid Organic−Inorganic Thermoplastics: Styryl-Based Polyhedral Oligomeric Silsesquioxane Polymers
Haddad, T. S., & Lichtenhan, J. D. (1996) · Macromolecules · doi:10.1021/ma960609d · Cited by 499
Lichtenhan, J. D., Otonari, Y. A., & Carr, M. J. (1995) · Macromolecules · doi:10.1021/ma00128a067 · Cited by 465
Kannan, R. Y., Salacinski, H. J., Butler, P. E., & Seifalian, A. M. (2005) · Accounts of Chemical Research · doi:10.1021/ar050055b · Cited by 423
Polyhedral oligomeric silsesquioxane(POSS)-based polymers
Schwab, J. J., & Lichtenhan, J. D. (1998) · Applied Organometallic Chemistry · doi:10.1002/(sici)1099-0739(199810/11)12:10/11<707::aid-aoc776>3.0.co;2-1 · Cited by 405
Mechanical Relaxation and Microstructure of Poly(norbornyl-POSS) Copolymers
Mather, P. T., Jeon, H. G., Romo-Uribe, A., Haddad, T. S., & Lichtenhan, J. D. (1999) · Macromolecules · doi:10.1021/ma981210n · Cited by 388
Self-citation
Research works printed but not linked: 6
- Lendlein A., 2002, Angew. Chem., Int. Ed., 41, 2034, 10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- Schwab J. J., 1997, Polym. Mater. Sci. Eng., 77, 549
- Li G. Z., 2004, J. Polym. Sci., Part A: Polym. Chem., 43, 355
- Li G., 2005, Macromol. Containing Met. Met.-Like Elem., 4, 79
- Qin H., 2006, PMSE Preprints, 94, 127
- Fu B. X., 2000, Polymer, 42, 599
Cited by
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
Cordes, D. B., Lickiss, P. D., & Rataboul, F. (2010) · Chemical Reviews · doi:10.1021/cr900201r · Cited by 1,613
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
POSS related polymer nanocomposites
Kuo, S.-W., & Chang, F.-C. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.05.002 · Cited by 1,035
“Mather and coworkers [200] prepared a PU system using an organic biodegradable PDLA soft block and an”
BackgroundMethodMather, P. T., Luo, X., & Rousseau, I. A. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145419 · Cited by 911
“) to demonstrate waterinduced shape recovery in a PEO-based polyurethanes bearing the strongly hydrophobic POSS moiety in the hard segment (16).”
BackgroundSelf-citationRen, J. M., McKenzie, T. G., Fu, Q., Wong, E. H. H., Xu, J., An, Z., Shanmugam, S., Davis, T. P., Boyer, C., & Qiao, G. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00008 · Cited by 839
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
“A similar situation was discussed in the work of Yan et al. (2013), where fixed phases were contributing to the crystalline phase of polylactide-based copolyester and SiO2 fillers, and by Knight et al. (2008) for the case of shape memory polyurethane.”
BackgroundShape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Biomedical applications of thermally activated shape memory polymers
Small, IV, Singhal, P., Wilson, T. S., & Maitland, D. J. (2010) · Journal of Materials Chemistry · doi:10.1039/b923717h · Cited by 450
POSS Polymers: Physical Properties and Biomaterials Applications
Wu, J., & Mather, P. T. (2009) · Polymer Reviews · doi:10.1080/15583720802656237 · Cited by 411
“164 found poly(lactide)(PLA)-based polyurethanes with 20.”
Self-citationZhang, W., & Müller, A. H. E. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.03.002 · Cited by 378
Reduced time as a unified parameter determining fixity and free recovery of shape memory polymers
Yu, K., Ge, Q., & Qi, H. J. (2014) · Nature Communications · doi:10.1038/ncomms4066 · Cited by 256
Xie, M., Wang, L., Ge, J., Guo, B., & Ma, P. X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00191 · Cited by 201
Guo, B., Chen, Y., Lei, Y., Zhang, L., Zhou, W. Y., Rabie, A. B. M., & Zhao, J. (2011) · Biomacromolecules · doi:10.1021/bm2000378 · Cited by 189
Zhang, W., Fang, B., Walther, A., & Müller, A. H. E. (2009) · Macromolecules · doi:10.1021/ma802803d · Cited by 174
Zhou, L., Yu, L., Ding, M., Li, J., Tan, H. S., Wang, Z., & Fu, Q. (2011) · Macromolecules · doi:10.1021/ma102346a · Cited by 161
Shape-memory-actuated change in scaffold fiber alignment directs stem cell morphology
Tseng, L.-F., Mather, P. T., & Henderson, J. H. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.06.043 · Cited by 160
“Multiblock polyurethanes with a glassy soft segment and semicrystalline hard segment, which, as mentioned above, have previously been studied for shape-memory functionality and in vivo degradation kinetics and biocompatibility, represent a promising class of SMPs for the development and application as cytocompatible s…”
BackgroundMethodSelf-citationSelf-assembly of biodegradable polyurethanes for controlled delivery applications
Ding, M., Li, J., Tan, H. S., & Fu, Q. (2012) · Soft Matter · doi:10.1039/c2sm07402h · Cited by 154
Shape-Memory Polymer Composites
Madbouly, S. A., & Lendlein, A. (2009) · Advances in polymer science · doi:10.1007/12_2009_28 · Cited by 152
Biodegradable polyurethane composite scaffolds containing Bioglass® for bone tissue engineering
Ryszkowska, J., Auguścik, M., Sheikh, A. H., & Boccaccini, A. R. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.05.011 · Cited by 145
Review on the Functional Determinants and Durability of Shape Memory Polymers
Pretsch, T. (2010) · Polymers · doi:10.3390/polym2030120 · Cited by 138
“Studying semicrystalline thermoplastic (PCL/MDI/BDO)-based SMP with varying soft segment length (1,600–7,000) and hard segment content (7.8–27%), Li et al. [74] discovered that specimens with short soft segment length (low number average molecular weight of 1,600) and high hard segment content of 37 wt% exhibited extr…”
MethodInfluentialTailored drug release from biodegradable stent coatings based on hybrid polyurethanes
Guo, Q., Knight, P. T., & Mather, P. T. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.04.016 · Cited by 136
Self-citationHigh performance shape memory polymer networks based on rigid nanoparticle cores
Xu, J., & Song, J. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0912481107 · Cited by 129
“Adjustment of thermomechanical properties and degradability of these SMPs was accomplished by copolymerizing multiple monomers (3), incorporating inorganic elements into polymer backbones (4, 5), or applying different cross-linking methods (1, 5).”
BackgroundMethodInfluentialCai, Z., Wan, Y., Becker, M. L., Long, Y.-Z., & Dean, D. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.038 · Cited by 133
A “Click Chemistry” Approach to Linear and Star-Shaped Telechelic POSS-Containing Hybrid Polymers
Zhang, W., & Müller, A. H. E. (2010) · Macromolecules · doi:10.1021/ma902830f · Cited by 126
Fan, X., Tan, B. H., Li, Z., & Loh, X. J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02652 · Cited by 123
PEG−POSS Multiblock Polyurethanes: Synthesis, Characterization, and Hydrogel Formation
Wu, J., Ge, Q., & Mather, P. T. (2010) · Macromolecules · doi:10.1021/ma101336c · Cited by 123
Self-citationEntanglement-based shape memory polyurethanes: Synthesis and characterization
Gu, X., & Mather, P. T. (2012) · Polymer · doi:10.1016/j.polymer.2012.09.056 · Cited by 121
Self-citationDing, M., Li, J., Fu, X., Zhou, J., Tan, H. S., Gu, Q., & Fu, Q. (2009) · Biomacromolecules · doi:10.1021/bm9006826 · Cited by 110
Antimicrobial Properties of Nanostructured Hydrogel Webs Containing Silver
Wu, J., Hou, S., Ren, D., & Mather, P. T. (2009) · Biomacromolecules · doi:10.1021/bm900620w · Cited by 109
Self-citationGhanbari, H., Kidane, A. G., Burriesci, G., Ramesh, B., Darbyshire, A., & Seifalian, A. M. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.015 · Cited by 105
Polylactide-based thermoplastic shape memory polymer nanocomposites
Yan, B., Gu, S., & Zhang, Y. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.09.026 · Cited by 103
Star-shaped POSS-polycaprolactone polyurethanes and their shape memory performance
Mya, K. Y., Gose, H. B., Pretsch, T., Bothe, M., & He, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04459h · Cited by 102
Idumah, C. I., & Hassan, A. (2016) · Reviews in Chemical Engineering · doi:10.1515/revce-2015-0046 · Cited by 92
“Also, hybrid PLA/POSS/ PU nanocomposites with shape memory properties were recently fabricated (Knight et al. 2008).”
Organic–inorganic nanocomposite bilayers with triple shape memory effect
Bae, C. Y., Park, J. H., Kim, E. Y., Kang, Y. S., & Kim, B. K. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10722d · Cited by 88
Smart Polymers and their Applications
Espinosa‐Cano, E., Aguilar, M. R., Vázquez‐Lasa, B., & Román, J. S. (2019) · Elsevier eBooks · doi:10.1016/c2017-0-00049-6 · Cited by 87
Tailoring Micelle Formation and Gelation in (PEG−P(MA-POSS)) Amphiphilic Hybrid Block Copolymers
Tan, B. H., Hussain, H., & He, C. (2011) · Macromolecules · doi:10.1021/ma102510u · Cited by 86
Thermally-responsive biopolyurethanes from a biobased diisocyanate
Calvo‐Correas, T., Santamaria‐Echart, A., Saralegi, A., Martin, L., Valea, Á., Corcuera, M. Á., & Eceiza, A. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.022 · Cited by 84
Degradation of Polyurethanes for Cardiovascular Applications
Juan, V., Lerma, H., Hernández‐Sánchez, F., & José, M. (2013) · InTech eBooks · doi:10.5772/53681 · Cited by 82
PLGA−POSS End-Linked Networks with Tailored Degradation and Shape Memory Behavior
Knight, P. T., Lee, K. M., Chung, T., & Mather, P. T. (2009) · Macromolecules · doi:10.1021/ma901237h · Cited by 74
Self-citationWang, W., Guo, Y., & Otaigbe, J. U. (2009) · Polymer · doi:10.1016/j.polymer.2009.05.037 · Cited by 78
Zhang, W., Yuan, J., Weiss, S., Ye, X., Li, C., & Müller, A. H. E. (2011) · Macromolecules · doi:10.1021/ma201152t · Cited by 77
Huang, C.-L., Jiao, L., Zhang, J.-J., Zeng, J.-B., Yang, K.-K., & Wang, Y.-Z. (2012) · Polymer Chemistry · doi:10.1039/c2py00603k · Cited by 73
Nanoparticle Netpoints for Shape‐Memory Polymers
Agarwal, P., Chopra, M., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103908 · Cited by 65
Gu, X., Wu, J., & Mather, P. T. (2011) · Biomacromolecules · doi:10.1021/bm2006938 · Cited by 69
Self-citationSynthesis of N-Phenylaminomethyl POSS and Its Utilization in Polyurethane
Zhang, Q., He, H., Xi, K., Huang, X., Yu, X., & Jia, X. (2011) · Macromolecules · doi:10.1021/ma101825j · Cited by 69
Navarro-Baena, I., Kenny, J. M., & Peponi, L. (2014) · Cellulose · doi:10.1007/s10570-014-0446-5 · Cited by 68
“…can be obtained varying the content of each component during the synthesis in order to design biocompatible or biodegradable materials tailoring their final properties such as the degree of crystallinity, the mechanical response, etc. (Ahmad et al. 2011; Knight et al. 2008; Ruan et al. 2012).”
BackgroundNanoscale Order and Crystallization in POSS–PCL Shape Memory Molecular Networks
Alvarado‐Tenorio, B., Romo‐Uribe, A., & Mather, P. T. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01409 · Cited by 58
Self-citationWang, D. K., Varanasi, S., Strounina, E. V., Hill, D. J. T., Symons, A. L., Whittaker, A. K., & Rasoul, F. A. (2014) · Biomacromolecules · doi:10.1021/bm401728p · Cited by 56
Guo, Q., Mather, J. P., Yang, P., Boden, M., & Mather, P. T. (2015) · PLoS ONE · doi:10.1371/journal.pone.0129960 · Cited by 56
“A biodegradable POSS-based thermoplastic polyurethane (POSS TPU), which covalently incorporated POSS with poly(D, L-lactide) through urethane links, was employed in this work [28, 29].”
MethodSelf-citationZhao, B., Xu, S., Adeel, M., & Zheng, S. (2018) · Polymer · doi:10.1016/j.polymer.2018.11.026 · Cited by 54
Sanaka, R., Sahu, S. K., Sreekanth, P. S. R., Krishnasamy, S., Badgayan, N. D., Siva, B. V., & Ma, Q. (2024) · Journal of Composites Science · doi:10.3390/jcs8080324 · Cited by 53
McMullin, E., Rebar, H. T., & Mather, P. T. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00470 · Cited by 52
Self-citationTamburacı, S., Kımna, C., & Tıhmınlıoğlu, F. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.02.104 · Cited by 50
Chan‐Chan, L. H., Tkaczyk, C., Vargas‐Coronado, R. F., Cervantes‐Uc, J. M., Tabrizian, M., & Cauich‐Rodríguez, J. V. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-4931-4 · Cited by 48
Huitron-Rattinger, E., Ishida, K., Romo‐Uribe, A., & Mather, P. T. (2013) · Polymer · doi:10.1016/j.polymer.2013.04.015 · Cited by 47
Self-citationThermal Responsive Shape Memory Polymers for Biomedical Applications
Xu, J., & Song, J. (2011) · InTech eBooks · doi:10.5772/19256 · Cited by 47
Su, X., Guang, S., Xu, H., Liu, X., Sheng, L., Wang, X., Deng, Y., & Wang, P. (2009) · Macromolecules · doi:10.1021/ma901835n · Cited by 46
Synthesis and properties of segmented polyurethanes with triptycene units in the hard segment
Chang, Z., Zhang, M., Hudson, A. G., Orler, E. B., Moore, R. B., Wilkes, G. L., & Turner, S. R. (2013) · Polymer · doi:10.1016/j.polymer.2013.10.028 · Cited by 45
Zhao, B., Ding, H., Xu, S., & Zheng, S. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00830 · Cited by 43
Electroactive two‐way shape memory polymer laminates
Chen, S., Yang, S., Li, Z., Xu, S., Yuan, H., Chen, S., & Ge, Z. (2015) · Polymer Composites · doi:10.1002/pc.22958 · Cited by 39
Novel hybrid polyurethane/POSS materials via bulk polymerization
Prządka, D., Jęczalik, J., Andrzejewska, E., Marciniec, B., Dutkiewicz, M., & Szłapka, M. (2012) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2012.09.006 · Cited by 42
The influence of POSS nanoparticles on selected thermal properties of polyurethane-based hybrids
Majka, T. M., Raftopoulos, K. N., & Pielichowski, K. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6942-8 · Cited by 42
Tamburacı, S., Çeçen, B., Ustun, O., Ergür, B. U., Havıtçıoğlu, H., & Tıhmınlıoğlu, F. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00700 · Cited by 42
Zhang, W., Wang, S., Li, X., Yuan, J., & Wang, S. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.01.019 · Cited by 38
Shape-memory effect in amorphous potato starch: The influence of local orders and paracrystallinity
Chevigny, C., Foucat, L., Rolland‐Sabaté, A., Buléon, A., & Lourdin, D. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.065 · Cited by 37
Yin, G., Chen, G., Zhou, Z. G., & Li, Q. (2015) · RSC Advances · doi:10.1039/c5ra01971k · Cited by 36
Hebda, E., Bukowczan, A., Michałowski, S., Wroński, S., Urbaniak, P., Kaczmarek, M., Hutnik, E., Romaniuk-Drapała, A., Wołuń-Cholewa, M., & Pielichowski, K. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110370 · Cited by 35
Hydrolytic degradation of POSS–PEG–lactide hybrid hydrogels
Wang, D. K., Fredericks, P. M., Haddad, A. M., Hill, D. J. T., Rasoul, F. A., & Whittaker, A. K. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.10.005 · Cited by 34
Ojha, U., Kulkarni, P., Singh, J., & Faust, R. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23428 · Cited by 30
Guo, Q., Knight, P. T., Wu, J., & Mather, P. T. (2010) · Macromolecules · doi:10.1021/ma100662x · Cited by 33
Self-citationXu, S., Zhao, B., Wei, K., & Zheng, S. (2018) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24603 · Cited by 32
Wang, K., Cai, L., & Wang, S. (2011) · Polymer · doi:10.1016/j.polymer.2011.04.048 · Cited by 31
Developments in Shape Memory Polymeric Materials
Anis, A., Faiz, S., Luqman, M., Poulose, A. M., Gulrez, S. K. H., Shaikh, H., & Al-Zahrani, S. M. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2013.824466 · Cited by 31
“A significant progress has been reported in PEO based SMPU([77,78]).”
BackgroundLach, R., Michler, G. H., & Grellmann, W. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900393 · Cited by 30
Design strategies for shape memory polymers
Luo, X., & Mather, P. T. (2012) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2012.10.006 · Cited by 30
“A novel hard segment explored in our group is Polyhedral Oligosilsesquioxane (POSS), a nanostructured hybrid material with an inorganic silica-oxygen cage functionalized with up to 8 pendent organic groups [64,65].”
BackgroundSelf-citationPreparation and Characterization of Polyhedral Oligosilsesquioxanes
Cordes, D. B., & Lickiss, P. D. (2010) · Advances in silicon science · doi:10.1007/978-90-481-3787-9_2 · Cited by 29
Yin, G., Zhao, D., Wang, X., Ren, Y., Zhang, L., Wu, X., Nie, S., & Li, Q. (2015) · RSC Advances · doi:10.1039/c5ra15531b · Cited by 28
Dızman, C., Uyar, T., Taşdelen, M. A., & Yağcı, Y. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200351 · Cited by 28
In vivo kinetic degradation analysis and biocompatibility of aliphatic polyester polyurethanes
Knight, P. T., Kirk, J. T., Anderson, J. M., & Mather, P. T. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32806 · Cited by 27
Self-citationNath, K., Ghosh, S. K., Katheria, A., Das, P., Chowdhury, S. N., Hazra, P., Azam, S., & Das, N. C. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5949 · Cited by 27
Morphology, dynamics, and order development in a thermoplastic polyurethane with melt blended POSS
Szefer, E., Stafin, K., Leszczyńska, A., Zając, P., Hebda, E., Raftopoulos, K. N., & Pielichowski, K. (2019) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24868 · Cited by 26
Jose, S., George, J. J., Siengchin, S., & Parameswaranpillai, J. (2019) · Advanced structured materials · doi:10.1007/978-981-13-8574-2_1 · Cited by 25
Zeng, C., Zhang, N., Feng, S., & Ren, J. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2542-9 · Cited by 24
“Poly lactic acid (PLA) is well known as typical biodegradable polyester in practical applications [1, 2].”
BackgroundMaaskant, E., Post, W., Brouwer, M. T., van Es, D. S., & van Velzen, E. U. T. (2023) · Sustainable Production and Consumption · doi:10.1016/j.spc.2023.04.005 · Cited by 23
Poly(methyl methacrylate)/POSS hybrid networks by type II photoinitiated free radical polymerization
Sencevik, R. G., & Taşdelen, M. A. (2013) · Polymer Composites · doi:10.1002/pc.22814 · Cited by 23
Zhang, P., Zhang, Z., Fan, H., Tian, S., Chen, Y., & Yan, J. (2016) · RSC Advances · doi:10.1039/c6ra06856a · Cited by 23
Liu, W., Shicheng, H., & Zhou, H. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46399 · Cited by 23
Gómez‐Mascaraque, L. G., Palao‐Suay, R., & Vázquez‐Lasa, B. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.2.359 · Cited by 23
Yang, D., Gao, D., Zeng, C., Jiang, J.-S., & Xie, M. (2011) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2011.08.009 · Cited by 22
Huang, J., Jiang, P., Li, X., & Huang, Y. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9557-0 · Cited by 22
Structure-Mechanical and Thermal Properties Relationship of Novelγ-Valerolactone-Based Polyurethanes
Chalid, M., Heeres, H. J., & Broekhuis, A. A. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2014.976909 · Cited by 21
Defize, T., Riva, R., Thomassin, J., Jérôme, C., & Alexandre, M. (2011) · Macromolecular Symposia · doi:10.1002/masy.201100036 · Cited by 21
Multiblock Copoly(urethane–imide)s with the Properties of Thermoplastic Elastomers
Диденко, А. Л., Kuznetsov, D. A., Vaganov, G., Smirnova, V. E., Popova, E. N., Иванов, А. Г., Светличный, В. М., Yudin, V. E., & Kudryavtsev, V. V. (2020) · Polymer Science Series C · doi:10.1134/s1811238220020046 · Cited by 20
Markovic, E., Nguyen, K., Clarke, S., Constantopoulos, K. T., Matisons, J. G., & Simon, G. P. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26934 · Cited by 19
Implantable drug delivery systems
Major, I., Lastakchi, S., Dalton, M. B., & McConville, C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102548-2.00005-6 · Cited by 19
Диденко, А. Л., Smirnova, V. E., Popova, E. N., Vaganov, G., Kuznetcov, D., Светличный, В. М., Tolochko, O. V., Vasilyeva, E., Yudin, V. E., & Kudryavtsev, V. V. (2019) · Russian Chemical Bulletin · doi:10.1007/s11172-019-2599-8 · Cited by 19
Hwang, S. Y., Yoo, E.-S., & Im, S. S. (2011) · Polymer · doi:10.1016/j.polymer.2011.01.010 · Cited by 18
Basak, S., & Cavicchi, K. A. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200404 · Cited by 17
POSS/Polyurethane Hybrids and Nanocomposites: A Review on Preparation, Structure and Performance
Diao, S., Mao, L., Zhang, L., & Wang, Y. (2015) · Elastomers and Composites · doi:10.7473/ec.2015.50.1.035 · Cited by 16
Metadata
- Authors
- Knight, P. T., Lee, K. M., Qin, H., & Mather, P. T.
- Affiliations
- Case Western Reserve University (US)
- Corresponding author
- Mather, Patrick T.
- ORCID
- Mather, Patrick T.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-08-13
- Volume
- 9
- Issue
- 9
- Pages
- 2458-2467
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2108674784
- Cited by
- 141
- References
- 65
- Citations by year
- 2026: 2 · 2024: 1 · 2023: 5 · 2022: 3 · 2021: 1 · 2020: 4 · 2019: 11 · 2018: 5 · 2017: 2 · 2016: 12 · 2015: 12 · 2014: 10 · 2013: 12 · 2012: 12
- FWCI
- 7.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Materials Science › Materials Chemistry › Silicone and Siloxane Chemistry
- Keywords
- thermoplastic polyurethane, polyhedral oligomeric silsesquioxane, biodegradable polymers, poly(D,L-lactide), hard segment crystallization, physical crosslinking, shape memory effect, in vitro degradation, water absorption, glass transition temperature, crystallinity
- MeSH terms
- Biocompatible Materials, Materials Testing, Polymers, Polyurethanes, Temperature, Molecular Structure, Organosilicon Compounds
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.