The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Structurally Tailored Organic−Inorganic Perovskites: Optical Properties and Solution-Processed Channel Materials for Thin-Film Transistors
Abstract
The structures, optical properties, and field-effect mobilities of three semiconducting m -fluorophenethylammonium-based (C 6 H 4 FC 2 H 4 NH 3 ) 2 SnI 4 perovskites ( m = 2, 3, or 4) are reported and compared with the analogous measurements for the nonfluorosubstituted phenethylammonium system, (C 6 H 5 C 2 H 4 NH 3 ) 2 SnI 4 . The (4-fluorophenethylammonium) 2 SnI 4 system adopts a fully ordered monoclinic ( P 2 1 / c ) cell with the lattice parameters a = 16.653(2) Å, b = 8.6049(8) Å, c = 8.7551(8) Å, β = 98.644(2)°, and Z = 2. Both (3-fluorophenethylammonium) 2 SnI 4 and (2-fluorophenethylammonium) 2 SnI 4 are refined in a monoclinic ( C 2 /c ) subcell with the lattice parameters a = 34.593(4) Å, b = 6.0990(8) Å, c = 12.254(2) Å, β = 103.917(2)°, and Z = 4 and a = 35.070(3) Å, b = 6.1165(5) Å, c = 12.280(1) Å, β = 108.175(1)°, and Z = 4, respectively. Each hybrid structure consists of sheets of corner-sharing distorted SnI 6 octahedra separated by bilayers of fluorophenethylammonium cations. The dominant low energy feature in the optical absorption spectra for spin-coated films of the new hybrids (an exciton band associated with the tin(II) iodide framework) shifts from 609 to 599 nm and 588 nm across the series m = 4 to 2 (the corresponding value for the phenethylammonium-based system is 609 nm). This shift in optical properties is primarily attributed to subtle structural modifications induced by the organic cation substitutions, including a progressive shift in Sn−I−Sn tilt angle between adjacent SnI 6 octahedra from 156.375(8)° for the m = 4 structure to 154.16(3)° and 153.28(3)° (average) for the m = 3 and 2 structures, respectively. The corresponding angle in the previously reported phenethylammonium-based structure is 156.48° (average), very similar to the m = 4 value. Other potentially important structural modifications include the average Sn−I bond length and the degree of interaction between the substituted fluorine and the inorganic sheet. Saturation regime field-effect mobilities for thin-film field-effect transistors based on the new fluorophenethylammonium-based hybrids are similar to that previously observed in (phenethylammonium) 2 SnI 4, typically ranging from ∼0.2 to 0.6 cm 2 V - 1 s - 1, with the maximum currents in the devices decreasing across the series m = 4 to 2. The differences in transport properties can be attributed to the change in electronic structure, as well as to film morphology modification, brought about by the organic cation substitutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
van der Waals Volumes and Radii
Bondi, A. (1964) · The Journal of Physical Chemistry · doi:10.1021/j100785a001 · Cited by 19,350
The nature of .pi.-.pi. interactions
Hunter, C. A., & Sanders, J. K. M. (1990) · Journal of the American Chemical Society · doi:10.1021/ja00170a016 · Cited by 5,353
Organic-Inorganic Hybrid Materials as Semiconducting Channels in Thin-Film Field-Effect Transistors
Kagan, C. R., Mitzi, D. B., & Dimitrakopoulos, C. D. (1999) · Science · doi:10.1126/science.286.5441.945 · Cited by 2,110
Self-citationConducting tin halides with a layered organic-based perovskite structure
Mitzi, D. B., Feild, C. A., Harrison, W. T. A., & Guloy, A. M. (1994) · Nature · doi:10.1038/369467a0 · Cited by 1,100
Self-citationJorgensen, W. L., & Severance, D. L. (1990) · Journal of the American Chemical Society · doi:10.1021/ja00168a022 · Cited by 1,060
Templating and structural engineering in organic–inorganic perovskites
Mitzi, D. B. (2001) · Journal of the Chemical Society, Dalton Transactions · doi:10.1039/b007070j · Cited by 945
Self-citationLow-Voltage Organic Transistors on Plastic Comprising High-Dielectric Constant Gate Insulators
Dimitrakopoulos, C. D., Purushothaman, S., Kymissis, I., et al. (1999) · Science · doi:10.1126/science.283.5403.822 · Cited by 851
Self-citationMitzi, D. B., Chondroudis, K., & Kagan, C. R. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.451.0029 · Cited by 714
Self-citationPreparation and characterization of layered lead halide compounds
Calabrese, J., Jones, N. L., Harlow, R. L., Herron, N., Thorn, D. L., & Wang, Y. (1991) · Journal of the American Chemical Society · doi:10.1021/ja00006a076 · Cited by 596
Cited by
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Self-citationIntriguing Optoelectronic Properties of Metal Halide Perovskites
Manser, J. S., Christians, J. A., & Kamat, P. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00136 · Cited by 2,020
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Two-Dimensional Hybrid Halide Perovskites: Principles and Promises
Mao, L., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10851 · Cited by 1,584
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Mixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309361 · Cited by 1,306
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Perovskite as Light Harvester: A Game Changer in Photovoltaics
Kazim, S., Nazeeruddin, M. K., Grätzel, M., & Ahmad, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308719 · Cited by 962
Quantum and Dielectric Confinement Effects in Lower-Dimensional Hybrid Perovskite Semiconductors
Katan, C., Mercier, N., & Even, J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00417 · Cited by 864
Tuning the Luminescence of Layered Halide Perovskites
Smith, M. D., Connor, B. A., & Karunadasa, H. I. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00477 · Cited by 802
Lead iodide perovskite light-emitting field-effect transistor
Chin, X. Y., Cortecchia, D., Yin, J., Bruno, A., & Soci, C. (2015) · Nature Communications · doi:10.1038/ncomms8383 · Cited by 767
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Self-citationAmbipolar solution-processed hybrid perovskite phototransistors
Li, F., Ma, C., Wang, H., Hu, W., Yu, W., Sheikh, A. D., & Wu, T. (2015) · Nature Communications · doi:10.1038/ncomms9238 · Cited by 629
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Du, K.-Z., Tu, Q., Zhang, X., Han, Q., Liu, J., Zauscher, S., & Mitzi, D. B. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.7b01094 · Cited by 587
Self-citationRen, H., Yu, S., Chao, L., Xia, Y., Sun, Y., Zuo, S., Li, F., Niu, T., Yang, Y., Ju, H., et al. (2020) · Nature Photonics · doi:10.1038/s41566-019-0572-6 · Cited by 578
Tuning the Band Gap in Hybrid Tin Iodide Perovskite Semiconductors Using Structural Templating
Knutson, J. L., Martin, J. D., & Mitzi, D. B. (2005) · Inorganic Chemistry · doi:10.1021/ic050244q · Cited by 562
Self-citationHigh Open-Circuit Voltage Solar Cells Based on Organic–Inorganic Lead Bromide Perovskite
Edri, E., Kirmayer, S., Cahen, D., & Hodes, G. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400348q · Cited by 541
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
High-mobility ultrathin semiconducting films prepared by spin coating
Mitzi, D. B., Kosbar, L. L., Murray, C. E., Copel, M., & Afzali, A. (2004) · Nature · doi:10.1038/nature02389 · Cited by 531
Self-citationHailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00504 · Cited by 523
Colloidal lead halide perovskite nanocrystals: synthesis, optical properties and applications
Huang, H., Polavarapu, L., Sichert, J. A., Susha, A. S., Urban, A. S., & Rogach, A. L. (2016) · NPG Asia Materials · doi:10.1038/am.2016.167 · Cited by 497
Low dimensional metal halide perovskites and hybrids
Zhou, C., Lin, H., He, Q., Xu, L., Worku, M., Chaaban, M., Lee, S., Shi, X., Du, M.-H., & Ma, B. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.12.001 · Cited by 489
Perovskite solar cells: film formation and properties
Song, T.-B., Chen, Q., Zhou, H., Jiang, C., Wang, H.-H., (Michael) Yang, Y., Liu, Y., You, J., & Yang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05246c · Cited by 483
Recent progress in tin-based perovskite solar cells
Cao, J., & Yan, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04007j · Cited by 479
Halide Perovskites: Poor Man's High‐Performance Semiconductors
Stoumpos, C. C., & Kanatzidis, M. G. (2016) · Advanced Materials · doi:10.1002/adma.201600265 · Cited by 460
Xing, J., Liu, X. F., Zhang, Q., Ha, S. T., Yuan, Y. W., Shen, C., Sum, T. C., & Xiong, Q. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01166 · Cited by 451
Advances and Promises of Layered Halide Hybrid Perovskite Semiconductors
Pedesseau, L., Sapori, D., Traore, B., Robles, R., Fang, H.-H., Loi, M. A., Tsai, H., Nie, W., Blancon, J.-C., Neukirch, A., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b05944 · Cited by 439
Beyond methylammonium lead iodide: prospects for the emergent field of ns2containing solar absorbers
Ganose, A. M., Savory, C. N., & Scanlon, D. O. (2017) · Chemical Communications · doi:10.1039/c6cc06475b · Cited by 433
Lyu, M., Yun, J., Chen, P., Hao, M., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602512 · Cited by 432
Straus, D. B., & Kagan, C. R. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00201 · Cited by 397
Thin-Film Deposition of Organic−Inorganic Hybrid Materials
Mitzi, D. B. (2001) · Chemistry of Materials · doi:10.1021/cm0101677 · Cited by 388
Self-citationRecent Advances in Improving the Stability of Perovskite Solar Cells
Tiep, N. H., Ku, Z., & Fan, H. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501420 · Cited by 356
Organic–Inorganic Hybrid Halide Perovskites for Memories, Transistors, and Artificial Synapses
Choi, J., Han, J. S., Hong, K., Kim, S. Y., & Jang, H. W. (2018) · Advanced Materials · doi:10.1002/adma.201704002 · Cited by 314
Hu, J., Oswald, I. W. H., Stuard, S. J., Nahid, M. M., Zhou, N., Williams, O. F., Guo, Z., Yan, L., Hu, H., Chen, Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08980-x · Cited by 308
Li, J., Wang, J., Ma, J., Shen, H., Li, L., Duan, X., & Li, D. (2019) · Nature Communications · doi:10.1038/s41467-019-08768-z · Cited by 307
Song, Z., Watthage, S. C., Phillips, A. B., & Heben, M. J. (2016) · Journal of Photonics for Energy · doi:10.1117/1.jpe.6.022001 · Cited by 297
Li, L., Sun, Z., Wang, P., Hu, W., Wang, S., Ji, C., Hong, M., & Luo, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201705836 · Cited by 288
Shi, J., Gao, Y., Gao, X., Zhang, Y., Zhang, J., Jing, X., & Shao, M. (2019) · Advanced Materials · doi:10.1002/adma.201901673 · Cited by 286
Stoumpos, C. C., Mao, L., Malliakas, C. D., & Kanatzidis, M. G. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02764 · Cited by 282
Chen, Z., Zhang, C., Jiang, X., Liu, M., Xia, R., Shi, T., Chen, D., Xue, Q., Zhao, Y., Su, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603157 · Cited by 279
From bulk to molecularly thin hybrid perovskites
Leng, K., Fu, W., Liu, Y., Chhowalla, M., & Loh, K. P. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0185-1 · Cited by 264
Mao, L., Tsai, H., Nie, W., Ma, L., Im, J., Stoumpos, C. C., Malliakas, C. D., Hao, F., Wasielewski, M. R., Mohite, A. D., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03054 · Cited by 258
Solid-State Physics Perspective on Hybrid Perovskite Semiconductors
Even, J., Pedesseau, L., Katan, C., Kepenekian, M., Lauret, J.-S., Sapori, D., & Deleporte, E. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00695 · Cited by 254
Importance of structural deformation features in the prediction of hybrid perovskite bandgaps
Park, H., Mall, R., Ali, A., Sanvito, S., Bensmail, H., & El-Mellouhi, F. (2020) · Computational Materials Science · doi:10.1016/j.commatsci.2020.109858 · Cited by 39
Metadata
- Authors
- Mitzi, D. B., Dimitrakopoulos, C. D., & Kosbar, L. L.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-06-09
- Volume
- 13
- Issue
- 10
- Pages
- 3728-3740
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2044076544
- Cited by
- 384
- References
- 21
- FWCI
- 8.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.