The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Three-Dimensionally Ordered Macroporous Li4Ti5O12: Effect of Wall Structure on Electrochemical Properties
Abstract
Three-dimensionally ordered macroporous (3DOM) Li 4 Ti 5 O 12 was synthesized using poly(methyl methacrylate) colloidal crystal templates and metal organic aqueous precursors. 3DOM structures of various filling fractions and wall thicknesses were synthesized, and the materials evaluated in lithium ion battery cells. The 3DOM architecture was found to markedly improve the rate capability of Li 4 Ti 5 O 12 when the voids of the template were underfilled or perfectly filled. When the template voids were overfilled, the performance of the electrode was similar to that of nonporous Li 4 Ti 5 O 12 . We believe the enhanced rate capability results from the interconnected network of nanometer scale walls, which create short lithium diffusion distances and better contact with the electrolyte. SEM and TEM micrographs reveal that the nature of the wall structure forms low angle grain boundaries in 3DOM Li 4 Ti 5 O 12, which enhances conduction pathways in the particle, especially at high rates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Inhibited Spontaneous Emission in Solid-State Physics and Electronics
Yablonovitch, E. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2059 · Cited by 14,067
Strong localization of photons in certain disordered dielectric superlattices
John, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.2486 · Cited by 10,029
Line profiles of neutron powder-diffraction peaks for structure refinement
Rietveld, H. M. (1967) · Acta Crystallographica · doi:10.1107/s0365110x67000234 · Cited by 3,660
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Template-directed colloidal crystallization
van Blaaderen, A., Ruel, R., & Wiltzius, P. (1997) · Nature · doi:10.1038/385321a0 · Cited by 1,195
Holland, B. T., Blanford, C. F., Do, T., & Stein, A. (1999) · Chemistry of Materials · doi:10.1021/cm980666g · Cited by 736
Spinel Anodes for Lithium‐Ion Batteries
Ferg, E., Gummow, R. J., de Kock, A., & Thackeray, M. M. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059324 · Cited by 661
Evidence of Two‐Phase Formation upon Lithium Insertion into the Li1.33Ti1.67 O 4 Spinel
Scharner, S., Weppner, W., & Schmid‐Beurmann, P. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391692 · Cited by 538
Stein, A., & Schroden, R. C. (2001) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(01)00022-5 · Cited by 471
Accuracy of XRPD QPA using the combined Rietveld–RIR method
Gualtieri, A. F. (2000) · Journal of Applied Crystallography · doi:10.1107/s002188989901643x · Cited by 469
Cited by
Enhancing the performances of Li-ion batteries by carbon-coating: present and future
Li, H., & Zhou, H. (2012) · Chem. Commun. · doi:10.1039/c1cc14764a · Cited by 963
Hierarchically Structured Porous Materials for Energy Conversion and Storage
Li, Y., Fu, Z., & Su, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200591 · Cited by 951
Ti-based compounds as anode materials for Li-ion batteries
Zhu, G.-N., Wang, Y.-G., & Xia, Y.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03410g · Cited by 862
Porous electrode materials for lithium-ion batteries–how to prepare them and what makes them special
Vu, A., Qian, Y., & Stein, A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200320 · Cited by 719
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Stein, A., Wilson, B. E., & Rudisill, S. G. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35317b · Cited by 551
Template-Directed Materials for Rechargeable Lithium-Ion Batteries
Cheng, F., Tao, Z., Liang, J., & Chen, J. (2008) · Chemistry of Materials · doi:10.1021/cm702091q · Cited by 537
Stein, A., Li, F., & Denny, N. R. (2008) · Chemistry of Materials · doi:10.1021/cm702107n · Cited by 487
Recent advances in metal nitrides as high-performance electrode materials for energy storage devices
Balogun, M.-S., Qiu, W., Wang, W., Fang, P., Lu, X., & Tong, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05565a · Cited by 467
Mesoporous Li4Ti5O12 Hollow Spheres with Enhanced Lithium Storage Capability
Yu, L., Wu, H. B., & Lou, X. W. (. (2013) · Advanced Materials · doi:10.1002/adma.201204912 · Cited by 373
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Wang, R., Wang, L., Liu, R., Li, X., Wu, Y., & Ran, F. (2024) · ACS Nano · doi:10.1021/acsnano.3c08712 · Cited by 336
Shi, Y., Wen, L., Li, F., & Cheng, H.-M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.002 · Cited by 321
Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications
Yue, Y., Binder, A. J., Guo, B., Zhang, Z., Qiao, Z., Tian, C., & Dai, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201310679 · Cited by 296
Kang, E., Jung, Y. S., Kim, G., Chun, J., Wiesner, U., Dillon, A. C., Kim, J. K., & Lee, J. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101123 · Cited by 276
Facile synthesis of hierarchically porous Li4Ti5O12 microspheres for high rate lithium ion batteries
Shen, L., Yuan, C., Luo, H., Zhang, X., Xu, K., & Xia, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00348d · Cited by 274
Silicon Inverse‐Opal‐Based Macroporous Materials as Negative Electrodes for Lithium Ion Batteries
Esmanski, A., & Ozin, G. A. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900306 · Cited by 269
Zhou, K., Wang, H., Jiu, J., Liu, J., Yan, H., & Suganuma, K. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.175 · Cited by 261
Natural products targeting telomere maintenance
Chen, J. L.-Y., Sperry, J., Ip, N. Y., & Brimble, M. A. (2011) · MedChemComm · doi:10.1039/c0md00241k · Cited by 41
Metadata
- Authors
- Sorensen, E. M., Barry, S. J., Jung, H.-K., Rondinelli, J. M., Vaughey, J. T., & Poeppelmeier, K. R.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-12-27
- Volume
- 18
- Issue
- 2
- Pages
- 482-489
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1970358574
- Cited by
- 303
- References
- 21
- FWCI
- 8.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.