The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Porous Polymer Networks: Synthesis, Porosity, and Applications in Gas Storage/Separation
Abstract
Three porous polymer networks (PPNs) have been synthesized by the homocoupling of tetrahedral monomers. Like other hyper-cross-linked polymer networks, these materials are insoluble in conventional solvents and exhibit high thermal and chemical stability. Their porosity was confirmed by N 2 sorption isotherms at 77 K. One of these materials, PPN-3, has a Langmuir surface area of 5323 m 2 g −1 . Their clean energy applications, especially in H 2, CH 4, and CO 2 storage, as well as CO 2 /CH 4 separation, have been carefully investigated. Although PPN-1 has the highest gas affinity because of its smaller pore size, the maximal gas uptake capacity is directly proportional to their surface area. PPN-3 has the highest H 2 uptake capacity among these three (4.28 wt %, 77 K). Although possessing the lowest surface area, PPN-1 shows the best CO 2 /CH 4 selectivity among them.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
Porous, Crystalline, Covalent Organic Frameworks
Côté, A. P., Benin, A. I., Ockwig, N. W., O'Keeffe, M., Matzger, A. J., & Yaghi, O. M. (2005) · Science · doi:10.1126/science.1120411 · Cited by 8,357
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Solvent-Accessible Surfaces of Proteins and Nucleic Acids
Connolly, M. L. (1983) · Science · doi:10.1126/science.6879170 · Cited by 2,745
Furukawa, H., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9015765 · Cited by 2,608
Designed Synthesis of 3D Covalent Organic Frameworks
El-Kaderi, H. M., Hunt, J. R., Mendoza-Cortés, J. L., Côté, A. P., Taylor, R. E., O'Keeffe, M., & Yaghi, O. M. (2007) · Science · doi:10.1126/science.1139915 · Cited by 2,575
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Chemical and Physical Solutions for Hydrogen Storage
Eberle, U., Felderhoff, M., & Schüth, F. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200806293 · Cited by 1,674
Ben, T., Ren, H., Ma, S., Cao, D., Lan, J., Jing, X., Wang, W., Xu, J., Deng, F., Simmons, J. M., et al. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200904637 · Cited by 1,578
Conjugated Microporous Poly(aryleneethynylene) Networks
Jiang, J., Su, F., Trewin, A., Wood, C. D., Campbell, N. L., Niu, H., Dickinson, C., Ganin, A. Y., Rosseinsky, M. J., Khimyak, Y. Z., et al. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701595 · Cited by 1,465
Yang, J., Sudik, A., Wolverton, C., & Siegel, D. J. (2010) · Chem. Soc. Rev. · doi:10.1039/b802882f · Cited by 1,227
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
High Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
Adsorption Equilibrium of Methane, Carbon Dioxide, and Nitrogen on Zeolite 13X at High Pressures
Cavenati, S., Grande, C. A., & Rodrigues, A. E. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je0498917 · Cited by 1,147
Conjugated Microporous Polymers
Cooper, A. I. (2009) · Advanced Materials · doi:10.1002/adma.200801971 · Cited by 1,031
Jiang, J.-X., Su, F., Trewin, A., Wood, C. D., Niu, H., Jones, J. T. A., Khimyak, Y. Z., & Cooper, A. I. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8010176 · Cited by 879
Yang, Q., & Zhong, C. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp062723w · Cited by 570
Hydrogen adsorption and storage on porous materials☆
Thomas, K. M. (2007) · Catalysis Today · doi:10.1016/j.cattod.2006.09.015 · Cited by 524
McKeown, N. B., Budd, P. M., Msayib, K. J., Ghanem, B. S., Kingston, H. J., Tattershall, C. E., Makhseed, S., Reynolds, K. J., & Fritsch, D. (2005) · Chemistry – A European Journal · doi:10.1002/chem.200400860 · Cited by 507
Davankov, V. A., & Tsyurupa, M. P. (1990) · Reactive Polymers · doi:10.1016/0923-1137(90)90038-6 · Cited by 493
The current status of hydrogen storage in metal–organic frameworks
Zhao, D., Yuan, D., & Zhou, H.-C. (2008) · Energy & Environmental Science · doi:10.1039/b808322n · Cited by 443
Self-citationPorous Adsorbents for Vehicular Natural Gas Storage: A Review
Menon, V. C., & Komarneni, S. (1998) · Journal of Porous Materials · doi:10.1023/a:1009673830619 · Cited by 419
Advances in the study of methane storage in porous carbonaceous materials
Lozano-Castelló, D., Alcañiz-Monge, J., de la Casa-Lillo, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2002) · Fuel · doi:10.1016/s0016-2361(02)00124-2 · Cited by 413
Babarao, R., Hu, Z., Jiang, J., Chempath, S., & Sandler, S. I. (2007) · Langmuir · doi:10.1021/la062289p · Cited by 408
Hydrogen Adsorption and Storage on Porous Materials
(2014) · Handbook of Hydrogen Energy · doi:10.1201/b17226-28 · Cited by 396
Carborane-based metal–organic frameworks as highly selective sorbents for CO2 over methane
Bae, Y.-S., Farha, O. K., Spokoyny, A. M., Mirkin, C. A., Hupp, J. T., & Snurr, R. Q. (2008) · Chemical Communications · doi:10.1039/b805785k · Cited by 383
Conjugated microporous poly(phenylene butadiynylene)s
Jiang, J.-X., Su, F., Niu, H., Wood, C. D., Campbell, N. L., Khimyak, Y. Z., & Cooper, A. I. (2008) · Chem. Commun. · doi:10.1039/b715563h · Cited by 287
182. Macrocyclic acetylenic compounds. Part I. Cyclotetradeca-1 :3-diyne and related compounds
Eglinton, G., & Galbraith, A. R. (1959) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9590000889 · Cited by 285
Farha, O. K., Spokoyny, A. M., Hauser, B. G., Bae, Y.-S., Brown, S. E., Snurr, R. Q., Mirkin, C. A., & Hupp, J. T. (2009) · Chemistry of Materials · doi:10.1021/cm901280w · Cited by 279
Removal of Carbon Dioxide from Natural Gas by Vacuum Pressure Swing Adsorption
Cavenati, S., Grande, C. A., & Rodrigues, A. E. (2006) · Energy & Fuels · doi:10.1021/ef060119e · Cited by 230
Porous Polymers: Enabling Solutions for Energy Applications
Thomas, A., Kuhn, P., Weber, J., Titirici, M., & Antonietti, M. (2009) · Macromolecular Rapid Communications · doi:10.1002/marc.200800642 · Cited by 184
Porous Organic Polymers: Distinction from Disorder?
Trewin, A., & Cooper, A. I. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906827 · Cited by 175
Zhao, D., Yuan, D., Yakovenko, A. A., & Zhou, H.-C. “. (2010) · Chemical Communications · doi:10.1039/c002767g · Cited by 153
Self-citationFarha, O. K., Bae, Y., Hauser, B. G., Spokoyny, A. M., Snurr, R. Q., Mirkin, C. A., & Hupp, J. T. (2010) · Chemical Communications · doi:10.1039/b922554d · Cited by 150
Assembly of nanoporous organic materials from molecular building blocks
Maly, K. E. (2009) · Journal of Materials Chemistry · doi:10.1039/b816089a · Cited by 83
Cited by
Chemistry of Covalent Organic Frameworks
Waller, P. J., Gándara, F., & Yaghi, O. M. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00369 · Cited by 1,897
Design and Preparation of Porous Polymers
Wu, D., Xu, F., Sun, B., Fu, R., He, H., & Matyjaszewski, K. (2012) · Chemical Reviews · doi:10.1021/cr200440z · Cited by 1,748
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Li, B., Zhang, Y., Krishna, R., Yao, K., Han, Y., Wu, Z., Ma, D., Shi, Z., Pham, T., Space, B., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502119z · Cited by 455
Self-citationPorous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Self-citation
Metadata
- Authors
- Lu, W., Yuan, D., Zhao, D., Schilling, C. I., Plietzsch, O., Muller, T., Bräse, S., Guenther, J., Blümel, J., Krishna, R., Li, Z., & Zhou, H.-C.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-10-05
- Volume
- 22
- Issue
- 21
- Pages
- 5964-5972
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2048575095
- Cited by
- 577
- References
- 38
- FWCI
- 68.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
