The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Prominent Short-Circuit Currents of Fluorinated Quinoxaline-Based Copolymer Solar Cells with a Power Conversion Efficiency of 8.0%
Abstract
A tailor-made medium-band gap fluorinated quinoxaline-based conjugated polymer of PBDT-TFQ was designed and synthesized as a donor material for bulk-heterojunction (BHJ) solar cells. This polymer is possessed of an intrachain donor–acceptor architecture and exhibits a broad and strong absorption spectrum across the entire UV–vis region. The introduction of F atoms with high electron affinity to the quinoxaline moiety is effective in further lowering both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels of PBDT-TFQ to attain higher open-circuit voltage ( V oc ). With an optimized blend ratio of PBDT-TFQ:PC 71 BM (1:1, w/w), a high power conversion efficiency (PCE) of 8.0% was obtained, with a V oc of 0.76 V, a short-circuit current density ( J sc ) of 18.2 mA cm –2, and a fill factor (FF) of 58.1% under AM 1.5G irradiation. The resulting copolymer reveals an outstanding J sc value, arising from the higher hole mobility of PBDT-TFQ, together with the better continuous percolation pathways within the polymer blend for efficient exciton dissociation and charge transport.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Self-citationHe, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Origin of the Open Circuit Voltage of Plastic Solar Cells
Brabec, C. J., Cravino, A., Meissner, D., Sariciftci, N. S., Fromherz, T., Rispens, M. T., Sanchez, L., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<374::aid-adfm374>3.0.co;2-w · Cited by 1,808
Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells
Lee, J. K., Ma, W. L., Brabec, C. J., Yuen, J., Moon, J. S., Kim, J. Y., Lee, K., Bazan, G. C., & Heeger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja710079w · Cited by 1,613
Sun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Price, S. C., Stuart, A. C., Yang, L., Zhou, H., & You, W. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1112595 · Cited by 1,505
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Dou, L., You, J., Yang, J., Chen, C.-C., He, Y., Murase, S., Moriarty, T., Emery, K., Li, G., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.356 · Cited by 1,416
Stability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Mihailetchi, V. D., Xie, H. X., de Boer, B., Koster, L. J. A., & Blom, P. W. M. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500420 · Cited by 1,283
Indene−C60Bisadduct: A New Acceptor for High-Performance Polymer Solar Cells
He, Y., Chen, H.-Y., Hou, J., & Li, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja908602j · Cited by 1,244
Self-citationZhou, H., Yang, L., Stuart, A. C., Price, S. C., Liu, S., & You, W. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005451 · Cited by 1,210
Chu, T.-Y., Lu, J., Beaupré, S., Zhang, Y., Pouliot, J.-R., Wakim, S., Zhou, J., Leclerc, M., Li, Z., Ding, J., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200314m · Cited by 1,047
Interface Engineering for Organic Electronics
Ma, H., Yip, H., Huang, F., & Jen, A. K. ‐. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902236 · Cited by 950
Piliego, C., Holcombe, T. W., Douglas, J. D., Woo, C. H., Beaujuge, P. M., & Fréchet, J. M. J. (2010) · Journal of the American Chemical Society · doi:10.1021/ja103275u · Cited by 907
Jenekhe, S. A., Lu, L., & Alam, M. M. (2001) · Macromolecules · doi:10.1021/ma0100448 · Cited by 779
Dithienogermole As a Fused Electron Donor in Bulk Heterojunction Solar Cells
Amb, C. M., Chen, S., Graham, K. R., Subbiah, J., Small, C. E., So, F., & Reynolds, J. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja204056m · Cited by 702
Fullerene Bisadducts for Enhanced Open‐Circuit Voltages and Efficiencies in Polymer Solar Cells
Lenes, M., Wetzelaer, G. A. H., Kooistra, F. B., Veenstra, S. C., Hummelen, J. C., & Blom, P. W. M. (2008) · Advanced Materials · doi:10.1002/adma.200702438 · Cited by 609
Son, H. J., Wang, W., Xu, T., Liang, Y., Wu, Y., Li, G., & Yu, L. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108601g · Cited by 575
Huo, L., Hou, J., Zhang, S., Chen, H., & Yang, Y. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906934 · Cited by 535
Self-citationKitamura, C., Tanaka, S., & Yamashita, Y. (1996) · Chemistry of Materials · doi:10.1021/cm950467m · Cited by 509
Mihailetchi, V. D., Koster, L. J. A., Blom, P. W. M., Melzer, C., de Boer, B., van Duren, J. K. J., & Janssen, R. A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400345 · Cited by 396
Wang, D. H., Kim, D. Y., Choi, K. W., Seo, J. H., Im, S. H., Park, J. H., Park, O. O., & Heeger, A. J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101021 · Cited by 375
Yang, C., & Jenekhe, S. A. (1995) · Macromolecules · doi:10.1021/ma00108a054 · Cited by 352
Choi, H., Park, J. S., Jeong, E., Kim, G., Lee, B. R., Kim, S. O., Song, M. H., Woo, H. Y., & Kim, J. Y. (2011) · Advanced Materials · doi:10.1002/adma.201100266 · Cited by 260
New fluorinated functional materials
Pagliaro, M., & Ciriminna, R. (2005) · Journal of Materials Chemistry · doi:10.1039/b507583c · Cited by 255
Chu, T., Lu, J., Beaupré, S., Zhang, Y., Pouliot, J., Zhou, J., Najari, A., Leclerc, M., & Tao, Y. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102623 · Cited by 235
Practical Roadmap and Limits to Nanostructured Photovoltaics
Lunt, R. R., Osedach, T. P., Brown, P. R., Rowehl, J. A., & Bulović, V. (2011) · Advanced Materials · doi:10.1002/adma.201103404 · Cited by 190
Kim, K.-H., Kang, H., Kim, H. J., Kim, P. S., Yoon, S. C., & Kim, B. J. (2012) · Chemistry of Materials · doi:10.1021/cm3010369 · Cited by 190
Gevaerts, V. S., Furlan, A., Wienk, M. M., Turbiez, M., & Janssen, R. A. J. (2012) · Advanced Materials · doi:10.1002/adma.201104939 · Cited by 174
Di Nuzzo, D., Aguirre, A., Shahid, M., Gevaerts, V. S., Meskers, S. C. J., & Janssen, R. A. J. (2010) · Advanced Materials · doi:10.1002/adma.201001452 · Cited by 169
High Efficiency Organic Photovoltaics Incorporating a New Family of Soluble Fullerene Derivatives
Backer, S. A., Sivula, K., Kavulak, D. F., & Fréchet, J. M. J. (2007) · Chemistry of Materials · doi:10.1021/cm070893v · Cited by 165
Cheng, Y., Hsieh, C., Li, P., & Hsu, C. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002502 · Cited by 163
Huo, L., Guo, X., Zhang, S., Li, Y., & Hou, J. (2011) · Macromolecules · doi:10.1021/ma200743b · Cited by 159
Tong, M., Cho, S., Rogers, J. T., Schmidt, K., Hsu, B. B. Y., Moses, D. J., Coffin, R. C., Krämer, E. J., Bazan, G. C., & Heeger, A. J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001271 · Cited by 145
Müller, C., Wang, E., Andersson, L. M., Tvingstedt, K., Zhou, Y., Andersson, M. R., & Inganäs, O. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000224 · Cited by 127
Cheng, Y., Cao, F., Lin, W.-C., Chen, C.-H., & Hsieh, C. (2011) · Chemistry of Materials · doi:10.1021/cm1032404 · Cited by 123
Interlayer for Modified Cathode in Highly Efficient Inverted ITO‐Free Organic Solar Cells
Tang, Z., Andersson, L. M., George, Z., Vandewal, K., Tvingstedt, K., Heriksson, P., Kroon, R., Andersson, M. R., & Inganäs, O. (2012) · Advanced Materials · doi:10.1002/adma.201104579 · Cited by 113
Zhang, H., Liu, Y., Yao, D., & Yang, B. J. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35038f · Cited by 111
Kim, K., Kang, H., Nam, S. Y., Jung, J., Kim, P. S., Cho, C., Lee, C., Yoon, S. C., & Kim, B. J. (2011) · Chemistry of Materials · doi:10.1021/cm202885s · Cited by 106
Lee, D., Hubijar, E., Kalaw, G. J. D., & Ferraris, J. P. (2012) · Chemistry of Materials · doi:10.1021/cm3011056 · Cited by 104
Li, Z., Zhang, Y., Tsang, S., Du, X., Zhou, J., Tao, Y., & Ding, J. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp202996p · Cited by 101
Chen, H., Chou, S., Tseng, W., Chen, I. P., Liu, C., Liu, C., Liu, C., Chen, C., Wu, C., & Chou, P. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200218 · Cited by 91
Self-citationIyer, A., Bjorgaard, J. A., Anderson, T. E., & Köse, M. E. (2012) · Macromolecules · doi:10.1021/ma3009788 · Cited by 69
New Thiazolothiazole Copolymer Semiconductors for Highly Efficient Solar Cells
Subramaniyan, S., Xin, H., Kim, F. S., & Jenekhe, S. A. (2011) · Macromolecules · doi:10.1021/ma201054a · Cited by 67
Lai, Y., Higashihara, T., Hsu, J.-C., Ueda, M., & Chen, W. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.07.037 · Cited by 41
Cited by
A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance
Zhang, M., Guo, X., Ma, W., Ade, H., & Hou, J. (2015) · Advanced Materials · doi:10.1002/adma.201502110 · Cited by 1,247
Designing π-conjugated polymers for organic electronics
Guo, X., Baumgarten, M., & Müllen, K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.005 · Cited by 836
Donor–acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
Wu, J.-S., Cheng, S.-W., Cheng, Y.-J., & Hsu, C.-S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00250d · Cited by 629
Zhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Yan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
Metadata
- Authors
- Chen, H.-C., Chen, Y.-H., Liu, C.-C., Chien, Y.-C., Chou, S.-W., & Chou, P.-T.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-12-13
- Volume
- 24
- Issue
- 24
- Pages
- 4766-4772
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2331337334
- Cited by
- 337
- References
- 51
- FWCI
- 37.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.