On Defining a Simple Empirical Relationship to Predict the Pore Size of Mesoporous Silicas Prepared from PEO-b-PS Diblock Copolymers
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Mesoporous silicas with large and accessible pores have been successfully synthesized using laboratory-made poly(ethylene oxide)- b -polystyrene (PEO- b -PS) copolymers as templates. The PEO- b -PS copolymers were synthesized using living/controlled radical polymerization. The porous structure (mesopore size, size distribution, and microporous volume) was characterized using small-angle X-ray scattering, electron transmission microscopy, and nitrogen sorption measurements. In this study, we have investigated the dependence of the mesoporosity on both the PS and PEO blocks length using two series of PEO- b -PS copolymers with a constant degree of polymerization of the PEO block for each series ( N PEO = 114 and N PEO = 232). It was found that the mesopore size increases and the microporous volume decreases as the PS block length ( N PS ) increases. The PEO block participates to both the micropore and mesopore formation. By fitting these experimental data, a simple empirical relationship between the pore radius and the length of the both PS block ( N PS ) and PEO block ( N PEO ) is found R P (nm) = 0.36. N PEO 0.19 N PS 0.5 . This relationship is in agreement for both low- and high-molecular-weight copolymers and can be easily be used to fine-tune the mesopore size of silica materials, in a large range (from 4 to 22 nm), when using PEO- b -PS copolymers as templates. Furthermore, the influence of the synthesis temperature (between 25 and 60 °C) on the porous structure was also investigated and it was found that by increasing the synthesis temperature, the mesopore diameters remain relatively constant; however, the pore entrances increase in size, leading to more open pore structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructure fabrication using block copolymers
Hamley, I. W. (2003) · Nanotechnology · doi:10.1088/0957-4484/14/10/201 · Cited by 773
Organically modified aluminosilicate mesostructures from block copolymer phases
Templin, M., Franck, A., Du Chesne, A., Leist, H., Zhang, Y., Ulrich, R., Schädler, V., & Wiesner, U. (1997) · Science · doi:10.1126/science.278.5344.1795 · Cited by 668
Deng, Y., Yu, T., Wan, Y., Shi, Y., Meng, Y., Gu, D., Zhang, L., Huang, Y., Liu, C., Wu, X., et al. (2007) · Journal of the American Chemical Society · doi:10.1021/ja067379v · Cited by 402
Yu, K., Hurd, A. J., Eisenberg, A., & Brinker, C. J. (2001) · Langmuir · doi:10.1021/la0113724 · Cited by 129
Cited by
Nitroxide-mediated polymerization
Nicolas, J., Guillaneuf, Y., Lefay, C., Bertin, D., Gigmes, D., & Charleux, B. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.002 · Cited by 1,380
Self-citationLarge-pore ordered mesoporous materials templated from non-pluronic amphiphilic block copolymers
Deng, Y., Wei, J., Sun, Z., & Zhao, D. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35426h · Cited by 447
Wu, M., Meng, Q., Chen, Y., Du, Y., Zhang, L., Li, Y., Zhang, L., & Shi, J. (2015) · Advanced Materials · doi:10.1002/adma.201404256 · Cited by 299
Kimura, T. (2011) · Chemistry – An Asian Journal · doi:10.1002/asia.201100173 · Cited by 17
Metadata
- Authors
- Bloch, E., Llewellyn, P. L., Phan, T., Bertin, D., & Hornebecq, V.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-11
- Volume
- 21
- Issue
- 1
- Pages
- 48-55
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2047074319
- Cited by
- 48
- References
- 4
- FWCI
- 1.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On Defining a Simple Empirical Relationship to Predict the Pore Size of Mesoporous Silicas Prepared from PEO-b-PS Diblock Copolymers. https://app.cochat.ai/papers/10.1021/cm801978w
- The paper
- Bloch, E., Llewellyn, P. L., Phan, T., Bertin, D., & Hornebecq, V. (2009). On Defining a Simple Empirical Relationship to Predict the Pore Size of Mesoporous Silicas Prepared from PEO-b-PS Diblock Copolymers. Chemistry of Materials. https://doi.org/10.1021/cm801978w
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.