The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Abstract
Various Si/carbon/polymer composite electrodes were prepared to better understand the influence of the Si−polymer interactions on the stability of the Li−Si reaction and especially the superior performances of CMC-based (carboxy−methyl−cellulose) composites despite the large volume changes of the Si particles upon cycling. Via the modification of the composites formulation, the nature of the polymer, the nature and the amount of the substituting groups and the surface chemistry of the Si particles, together with the use of various characterization techniques (TEM, SEM, NMR−MAS, infrared spectroscopy, TGA, etc.) we could propose that the performances of the Si/Csp/CMC composite electrodes are nested in both the porous texture of the electrode and in the nature of the Si−polymer chemical bonding. A self-healing process of the rather strong Si−CMC hydrogen bonding which can accommodate textural stresses and can evolve during cycling is proposed to be critical for Si-based electrode performances. This better understanding leads to the design of Si-based electrodes with capacity retention reaching 1000 mAh/g of composite (i.e., full Si capacity) for at least 100 cycles and with a Coulombic efficiency close to 99.9% per cycle. Owing to these new aspects, we have now a deeper insight of the specific effects of the CMC binder, than could be successfully extended to other metals (Sn, Ge, Sb).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Self-citationArmand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Self-citationBarrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Supramolecular Chemistry: Concepts and Perspectives
Lehn, J. (1995) · Wiley eBooks · doi:10.1002/3527607439 · Cited by 9,864
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-healing and thermoreversible rubber from supramolecular assembly
Cordier, P., Tournilhac, F., Soulié-Ziakovic, C., & Leibler, L. (2008) · Nature · doi:10.1038/nature06669 · Cited by 2,984
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
Reversible Cycling of Crystalline Silicon Powder
Obrovac, M. N., & Krause, L. J. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2402112 · Cited by 1,259
All‐Solid Lithium Electrodes with Mixed‐Conductor Matrix
Boukamp, B. A., Lesh, G. C., & Huggins, R. A. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127495 · Cited by 1,160
Cited by
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Self-citationAlloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review
Su, X., Wu, Q., Li, J., Xiao, X., Lott, A., Lu, W., Sheldon, B. W., & Wu, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300882 · Cited by 1,593
Wu, H., Yu, G., Pan, L., Liu, N., McDowell, M. T., Bao, Z., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2941 · Cited by 1,378
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Covalent organic frameworks (COFs) for electrochemical applications
Zhao, X., Pachfule, P., & Thomas, A. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01569e · Cited by 1,193
Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid
Magasinski, A., Zdyrko, B., Kovalenko, I., Hertzberg, B., Burtovyy, R., Huebner, C. F., Fuller, T. F., Luzinov, I., & Yushin, G. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100871y · Cited by 1,101
Yang, S., Feng, X., Ivanovici, S., & Müllen, K. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201003485 · Cited by 1,072
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Nitta, N., & Yushin, G. (2014) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201300231 · Cited by 724
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Silicon-based materials as high capacity anodes for next generation lithium ion batteries
Liang, B., Liu, Y., & Xu, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.096 · Cited by 624
Casimir, A., Zhang, H., Ogoke, O., Amine, J. C., Lu, J., & Wu, G. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.023 · Cited by 600
The emerging era of supramolecular polymeric binders in silicon anodes
Kwon, T.-W., Choi, J. W., & Coskun, A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00858a · Cited by 560
Higgins, T. M., Park, S.-H., King, P. J., Zhang, C. (., McEvoy, N., Berner, N. C., Daly, D., Shmeliov, A., Khan, U., Duesberg, G., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b00218 · Cited by 481
Recent progress on silicon-based anode materials for practical lithium-ion battery applications
Li, P., Zhao, G., Zheng, X., Xu, X., Yao, C., Sun, W., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.07.014 · Cited by 480
Si-Based Anode Materials for Li-Ion Batteries: A Mini Review
Ma, D., Cao, Z., & Hu, A. (2014) · Nano-Micro Letters · doi:10.1007/s40820-014-0008-2 · Cited by 468
A Review of the Design of Advanced Binders for High‐Performance Batteries
Zou, F., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002508 · Cited by 465
A Robust Ion‐Conductive Biopolymer as a Binder for Si Anodes of Lithium‐Ion Batteries
Liu, J., Zhang, Q., Zhang, T., Li, J., Huang, L., & Sun, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500589 · Cited by 452
Qi, W., Shapter, J. G., Wu, Q., Yin, T., Gao, G., & Cui, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05283a · Cited by 445
Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries
Komaba, S., Shimomura, K., Yabuuchi, N., Ozeki, T., Yui, H., & Konno, K. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp201691g · Cited by 405
3D nanostructured conductive polymer hydrogels for high-performance electrochemical devices
Zhao, Y., Liu, B., Pan, L., & Yu, G. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40997j · Cited by 396
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M., Edström, K., Ayerbe, E., Berecibar, M., Bhowmik, A., Castelli, I. E., Clark, S., Dominko, R., Erakca, M., Franco, A. A., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102904 · Cited by 376
Luo, F., Liu, B., Zheng, J., Chu, G., Zhong, K., Li, H., Huang, X., & Chen, L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0131514jes · Cited by 372
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Ionically Conductive Self‐Healing Binder for Low Cost Si Microparticles Anodes in Li‐Ion Batteries
Munaoka, T., Yan, X., Lopez, J., To, J. W. F., Park, J., Tok, J. B. ‐., Cui, Y., & Bao, Z. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703138 · Cited by 322
Advances of polymer binders for silicon‐based anodes in high energy density lithium‐ion batteries
Zhao, Y., Yue, F., Li, S., Zhang, Y., Tian, Z., Xu, Q., Xin, S., & Guo, Y. (2021) · InfoMat · doi:10.1002/inf2.12185 · Cited by 318
Three-Dimensional Hierarchical Ternary Nanostructures for High-Performance Li-Ion Battery Anodes
Liu, B., Soares, P., Checkles, C., Zhao, Y., & Yu, G. (2013) · Nano Letters · doi:10.1021/nl401880v · Cited by 317
Biomass-derived materials for electrochemical energy storages
Zhang, L., Liu, Z., Cui, G., & Chen, L. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.09.003 · Cited by 313
Recycling of spent lithium-ion batteries in view of green chemistry
Li, Y., Lv, W., Huang, H., Yan, W., Li, X., Ning, P., Cao, H., & Sun, Z. (2021) · Green Chemistry · doi:10.1039/d1gc01639c · Cited by 300
Towards Ultrathick Battery Electrodes: Aligned Carbon Nanotube – Enabled Architecture
Evanoff, K., Khan, J., Balandin, A. A., Magasinski, A., Ready, W. J., Fuller, T. F., & Yushin, G. (2012) · Advanced Materials · doi:10.1002/adma.201103044 · Cited by 286
Eshetu, G. G., & Figgemeier, E. (2019) · ChemSusChem · doi:10.1002/cssc.201900209 · Cited by 273
Materials for Rechargeable Lithium-Ion Batteries
Hayner, C. M., Zhao, X., & Kung, H. H. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-081024 · Cited by 263
Wang, Z., Madhavi, S., & Lou, X. W. (. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp304216z · Cited by 260
Metadata
- Authors
- Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-02
- Volume
- 22
- Issue
- 3
- Pages
- 1229-1241
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2061772853
- Cited by
- 499
- References
- 32
- FWCI
- 14.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.