The DOI matches its Crossref record.
Bed Agglomeration Characteristics in Fluidized Quartz Bed Combustion of Phosphorus-Rich Biomass Fuels
Abstract
The bed agglomeration characteristics during combustion of phosphorus-rich biomass fuels and fuel mixtures were determined in a fluidized (quartz) bed reactor (5 kW). The fuels studied (separately and in mixtures) included logging residues, bark, willow, wheat straw, and phosphorus-rich fuels, like rapeseed meal (RM) and wheat distillers dried grain with solubles (DDGS). Phosphoric acid was used as a fuel additive. Bed material samples and agglomerates were studied by means of scanning electron microscopy (SEM) in combination with energy-dispersive X-ray spectroscopy (EDX), in order to analyze the morphological and compositional changes of coating/reaction layers and necks between agglomerated bed particles. Furthermore, bed ash particles were separated by sieving from the bed material samples and analyzed with SEM/EDS and powder X-ray diffraction (XRD). For logging residues, bark, and willow, with fuel ash rich in Ca and K but with low contents of P and organically bound Si, the bed layer formation is initiated by reactions of gaseous or liquid K compounds with the surface of the bed material grains, resulting in the formation of a potassium silicate melt. The last process is accompanied by the diffusion/dissolving of Ca into the melt and consequent viscous flow sintering and agglomeration. The addition of high enough phosphorus content to convert the available fuel ash basic oxides into phosphates reduced the amount of K available for the reaction with the quartz bed material grains, thus preventing the formation of an inner bed particle layer in the combustion of logging residues, bark, and willow. Some of the phosphate-rich ash particles, formed during the fuel conversion, adhered and reacted with the bed material grains to form noncontinuous phosphate−silicate coating layers, which were found responsible for the agglomeration process. Adding phosphorus-rich fuels/additives to fuels rich in K and Si (e.g., wheat straw) leads to the formation of alkali-rich phosphate−silicate ash particles that also adhered to the bed particles and caused agglomeration. The melting behavior of the bed particle layers/coatings formed during combustion of phosphorus-rich fuels and fuel mixtures is an important controlling factor behind the agglomeration tendency of the fuel and is heavily dependent on the content of alkaline earth metals in the fuel. A general observation is that phosphorus is the controlling element in ash transformation reactions during biomass combustion in fluidized quartz beds because of the high stability of phosphate compounds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Niu, Y., Tan, H., & Hui, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.09.003 · Cited by 1,069
Ash Transformation Chemistry during Combustion of Biomass
Boström, D., Skoglund, N., Grimm, A., Boman, C., Öhman, M., Broström, M., & Backman, R. (2012) · Energy & Fuels · doi:10.1021/ef201205b · Cited by 440
Self-citationWang, L., Hustad, J. E., Skreiberg, Ø., Skjevrak, G., & Grønli, M. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.03.004 · Cited by 314
Ash Deposition in Biomass Combustion or Co-Firing for Power/Heat Generation
Shao, Y., Wang, J., Preto, F., Zhu, J., & Xu, C. (2012) · Energies · doi:10.3390/en5125171 · Cited by 178
Production of Bio-Coal, Bio-Methane and Fertilizer from Seaweed via Hydrothermal Carbonisation
Smith, A. M., & Ross, A. B. (2016) · Algal Research · doi:10.1016/j.algal.2016.02.026 · Cited by 142
Smith, A. M., Whittaker, C., Shield, I., & Ross, A. B. (2018) · Fuel · doi:10.1016/j.fuel.2018.01.143 · Cited by 54
Metadata
- Authors
- Grimm, A., Skoglund, N., Boström, D., & Öhman, M.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-20
- Volume
- 25
- Issue
- 3
- Pages
- 937-947
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2167835235
- Cited by
- 188
- References
- 0
- FWCI
- 5.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.