Production of Biocrude from Biomass by Acidic Subcritical Water Followed by Alkaline Supercritical Water Two-Step Liquefaction
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Increased demand in transportation fuels, environmental concerns, and depletion of fossil fuels require the development of efficient conversion technologies for second-generation biofuels. The main objective of this work is to efficiently liquefy biomass into energy-dense biocrude. A novel two-step process is proposed in which acidic subcritical water followed by alkaline supercritical water media are utilized for the liquefaction. The concept is tested with switchgrass. The first step is carried out at 200 °C in acidic subcritical water to liquefy hemicelluloses to biocrude while avoiding the repolymerization reactions that would otherwise produce char. In the second step, the remaining unliquefied biomass (biomass-H) is subjected to supercritical water at 380 °C with Ca(OH) 2 as catalyst for minimizing the formation of char, enhancing lignin solubilization and therefore increasing liquefaction of the remaining polysaccharides toward biocrude. The proposed two-step liquefaction produces a significantly higher amount of biocrude, as compared to the traditional one-step process. The yield of biocrude from the proposed process is 40% on mass basis and 67% on energy basis of the feedstock biomass.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Hydrothermal processing of lignocellulosic materials
Garrote, G., Domínguez, H., & Parajó, J. C. (1999) · Holz als Roh- und Werkstoff · doi:10.1007/s001070050039 · Cited by 880
Competitive liquid biofuels from biomass
Demirbas, A. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.07.016 · Cited by 796
Hydrothermal liquefaction and gasification of Nannochloropsis sp.
Brown, T. M., Duan, P., & Savage, P. E. (2010) · Energy & Fuels · doi:10.1021/ef100203u · Cited by 745
Hydrothermal processing of microalgae using alkali and organic acids
Ross, A. B., Biller, P., Kubacki, M. L., Li, H., Lea-Langton, A., & Jones, J. M. (2010) · Fuel · doi:10.1016/j.fuel.2010.01.025 · Cited by 617
Hydrothermal Liquefaction of Macroalgae Enteromorpha prolifera to Bio-oil
Zhou, D., Zhang, L., Zhang, S., Fu, H., & Chen, J. (2010) · Energy & Fuels · doi:10.1021/ef100151h · Cited by 531
Cellulose decomposition in hot-compressed water with alkali or nickel catalyst
Minowa, T., Zhen, F., & Ogi, T. (1998) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(98)00059-x · Cited by 387
Cited by
An overview of effect of process parameters on hydrothermal carbonization of biomass
Nizamuddin, S., Baloch, H. A., Griffin, G. J., Mubarak, N. M., Bhutto, A. W., Abro, R., Mazari, S. A., & Ali, B. S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.122 · Cited by 514
Hydroprocessing challenges in biofuels production
Furimsky, E. (2013) · Catalysis Today · doi:10.1016/j.cattod.2012.11.008 · Cited by 284
Influence of strain-specific parameters on hydrothermal liquefaction of microalgae
López Barreiro, D., Zamalloa, C., Boon, N., Vyverman, W., Ronsse, F., Brilman, W., & Prins, W. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.07.123 · Cited by 133
Nanotechnology in Solar and Biofuels
Ramsurn, H., & Gupta, R. B. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400046y · Cited by 109
Self-citation
Metadata
- Authors
- Ramsurn, H., & Gupta, R. B.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-03-12
- Volume
- 26
- Issue
- 4
- Pages
- 2365-2375
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2322154416
- Cited by
- 56
- References
- 7
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.