CoChat

Is Elevated Pressure Required to Achieve a High Fixed-Carbon Yield of Charcoal from Biomass? Part 2: The Importance of Particle Size

Wang, Liang, Skreiberg, Øyvind, Gronli, Morten, Specht, Gregory Patrick, Antal, Michael Jerry · 2013 · Energy & Fuels
Cited by 75

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

The prosperity of Silicon Valley is built upon a foundation of wood charcoal that is the preferred reductant for the manufacture of pure silicon from quartz. Because ordinary pyrolysis processes offer low yields of charcoal from wood, the production of silicon makes heavy demands on the forest resource. The goal of this paper is to identify process conditions that improve the yield of charcoal from wood. To realize this goal, we first calculate the theoretical fixed-carbon yield of charcoal by use of the elemental composition of the wood feedstock. Next, we examine the influence of particle size, sample size, and pressure on experimental values of the fixed-carbon yields of the charcoal products and compare these values with the calculated theoretical limiting values. The carbonization by thermogravimetric analysis of small samples of small particles of wood in open crucibles delivers the lowest fixed-carbon yields, closely followed by standard proximate analysis procedures that employ a closed crucible and realize somewhat improved yields. The fixed-carbon yields (as determined by thermogravimetry) improve as the sample size increases and as the particle size increases. Further gains are realized when pyrolysis occurs in a closed crucible that hinders the egress of volatiles. At atmospheric pressure, high fixed-carbon yields are obtained from 30 mm wood cubes heated in a closed retort under nitrogen within a muffle furnace. The highest fixed-carbon yields are realized at elevated pressure by the flash carbonization process. Even at elevated pressure, gains are realized when large particles are carbonized. These findings reveal the key role that secondary reactions, involving the interaction of vapor-phase pyrolysis species with the solid substrate, play in the formation of charcoal. Models of biomass pyrolysis, which do not account for the impacts of sample size, particle size, and pressure on the interactions of volatiles with the solid substrate, cannot predict the yield of charcoal from biomass. These findings also offer important practical guidance to industry. Size reduction of wood feedstocks is not only energy and capital intensive; size reduction also reduces the yield of charcoal and exacerbates demands made on the forest resource.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef400041h

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Cited by

Metadata

Authors
Wang, L., Skreiberg, Ø., Gronli, M., Specht, G. P., & Antal, M. J.
Venue
Energy & Fuels
Published
2013-04-04
Volume
27
Issue
4
Pages
2146-2156
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W1997046404
Cited by
75
References
6
FWCI
4.78
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.