Comparative Study of Biomass Fast Pyrolysis and Direct Liquefaction for Bio-Oils Production: Products Yield and Characterizations
The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
The objective of this work is to compare two biomass-to-oil processes: fast pyrolysis and direct liquefaction, using the same biomass (beech sawdust). Fast pyrolysis is conducted in a cyclone reactor (wall temperature between 870 and 1040 K) and direct liquefaction in a 150-mL-autoclave reactor (bulk temperature between 420 and 600 K). Three fractions of pyro-oil are obtained from fast pyrolysis (heavy oil, light oil, and aerosol), whereas two fractions of liq-oil (heavy oil and water-soluble organics) are obtained from direct liquefaction. The comparison of both processes is based on the product yields and their characterization (ultimate analysis for solid and oils, oil–water content, gas and oil molecular composition, 1 H NMR for oils). For both processes, there is an optimal temperature at which the oil yield is maximum. Up to 62.6 wt % of pyro-oil are obtained at 970 K with the cyclone reactor (with 25.7 wt % of gas and 11.7 wt % of solid), whereas 47.0 wt % of liq-oil was obtained at 573 K with the batch-reactor (completed by 5.5 wt % of gas and 17.8 wt % of solid). Water content mainly explains the differences (mass yield and oxygen content) between oils from fast pyrolysis and direct liquefaction. Nevertheless, there are also some differences in organic composition: levoglucosane is a main component in pyro-oil, whereas levulinic acid is a main component in liq-oil. Finally, gas formed during direct liquefaction is mainly composed of CO 2 (more than 99 wt %), whereas gas from fast pyrolysis is a mixture of CO, CO 2, H 2, CH 4, and light hydrocarbons.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Under optimal conditions, the process can effectively produce bio-oil with high heating values, i.e., it has higher energy density and lower oxygen content than other biomass-based fuels, such as fast pyrolysis oil [9].”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [9]
In the citing paper
“For example, HTL bio-oil has a higher heating value due to its lower oxygen content and it is, therefore, more resistant to aging [9,93].”
From Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin (2020) · cites this paper as [9]
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Historical Developments in Hydroprocessing Bio-oils
Elliott, D. C. (2007) · Energy & Fuels · doi:10.1021/ef070044u · Cited by 1,370
A review on process conditions for optimum bio-oil yield in hydrothermal liquefaction of biomass
Akhtar, J., & Amin, N. A. S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.054 · Cited by 1,059
Biorefineries for biofuel upgrading: A critical review
Fatih Demirbas, M. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.04.043 · Cited by 729
Characterization of bio-oils in chemical families
Garcia-Perez, M., Chaala, A., Pakdel, H., Kretschmer, D., & Roy, C. (2007) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.02.006 · Cited by 498
Yu, Y., Lou, X., & Wu, H. (2008) · Energy & Fuels · doi:10.1021/ef700292p · Cited by 479
Demirbas, A. (2007) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.01.010 · Cited by 411
Fast Pyrolysis of Forestry Residue. 2. Physicochemical Composition of Product Liquid
Oasmaa, A., Kuoppala, E., & Solantausta, Y. (2003) · Energy & Fuels · doi:10.1021/ef020206g · Cited by 394
Research works printed but not linked: 2
- Broust, F.Le cyclone: un réacteur multifonctionnel. Application à la pyrogazéification et à la pyroliquéfaction de la biomasse. Ph.D. thesis,Institut National Polytechnique de Lorraine,Nancy, France, 2003.
- Thermal Biomass Conversion;Bridgwater, A. V.; Hofbauer, H.; van Loo, S., Eds.CPL Press: 2009; Vol.1, pp37–78.
Cited by
From lignocellulosic biomass to levulinic acid: A review on acid-catalyzed hydrolysis
Kang, S., Fu, J., & Zhang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.06.016 · Cited by 580
Lohri, C. R., Diener, S., Zabaleta, I., Mertenat, A., & Zurbrügg, C. (2017) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-017-9422-5 · Cited by 311
“Demirbaş (2000) and Doassans-Carrère et al. (2014) compare these two technologies in terms of operating conditions, products yields and characteristics.”
BackgroundZhang, Z., Zhen, J., Liu, B., Lv, K., & Deng, K. (2015) · Green Chemistry · doi:10.1039/c4gc01833h · Cited by 261
Recent advances in production and upgrading of bio-oil from biomass: A critical overview
Baloch, H. A., Nizamuddin, S., Siddiqui, M. T. H., Riaz, S., Jatoi, A. S., Dumbre, D. K., Mubarak, N. M., Srinivasan, M. P., & Griffin, G. J. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.07.050 · Cited by 248
Kraft Lignin: A Valuable, Sustainable Resource, Opportunities and Challenges
Argyropoulos, D. D. S., Crestini, C., Dahlstrand, C., Furusjö, E., Gioia, C., Jedvert, K., Henriksson, G., Hulteberg, C., Lawoko, M., Pierrou, C., et al. (2023) · ChemSusChem · doi:10.1002/cssc.202300492 · Cited by 231
Kumar, R., & Strezov, V. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110152 · Cited by 233
Li, X., Chen, G., Liu, C., Ma, W., Yan, B., & Zhang, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.057 · Cited by 233
Review of NMR Characterization of Pyrolysis Oils
Hao, N., Ben, H., Yoo, C. G., Adhikari, S., & Ragauskas, A. J. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b01002 · Cited by 158
Haarlemmer, G. W., Guizani, C., Anouti, S., Déniel, M., Roubaud, A., & Valin, S. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.082 · Cited by 154
“From the literature it appears that hydrothermal oil produced in batch reactors [17,18] contain more oxygen than oil produced in continuous reactors [19,20].”
BackgroundA review on fast hydrothermal liquefaction of biomass
Ni, J., Qian, L., Wang, Y., Zhang, B., Gu, H., Hu, Y., & Wang, Q. (2022) · Fuel · doi:10.1016/j.fuel.2022.125135 · Cited by 123
Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin
Lappalainen, J., Baudouin, D., Hornung, U., Schuler, J., Melin, K., Bjelić, S., Vogel, F., Konttinen, J., & Joronen, T. (2020) · Energies · doi:10.3390/en13133309 · Cited by 87
“, it has higher energy density and lower oxygen content than other biomass-based fuels, such as fast pyrolysis oil [9].”
BackgroundHydrothermal liquefaction of wood: a critical review
Jindal, M. K., & Jha, M. K. (2016) · Reviews in Chemical Engineering · doi:10.1515/revce-2015-0055 · Cited by 95
Gao, Y., Wang, H., Guo, J., Peng, P., Zhai, M., & She, D. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.003 · Cited by 90
Hertzog, J., Carré, V., Brech, Y. L., Dufour, A., & Aubriet, F. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00655 · Cited by 88
Baloch, H. A., Nizamuddin, S., Siddiqui, M. T. H., Mubarak, N. M., Dumbre, D. K., Madapusi, S. P., & Griffin, G. J. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.10.017 · Cited by 81
Bansode, A., Barde, M., Asafu‐Adjaye, O., Patil, V., Hinkle, J., Via, B. K., Adhikari, S., Adamczyk, A. J., Farag, R., Elder, T., et al. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c01916 · Cited by 62
Weir, A. I., Carrión, A. J. D. B., Queffélec, C., Bujoli, B., Chailleux, E., Uguna, C. N., Snape, C. E., & Airey, G. D. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127076 · Cited by 65
Hwang, H., Lee, J. H., Choi, I.-G., & Choi, J. W. (2018) · Environmental Technology · doi:10.1080/09593330.2018.1427799 · Cited by 62
“0% for L0) has also been observed in other studies [1,3].”
ResultTangredi, A., Barca, C., Ferrasse, J., & Boutin, O. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.142342 · Cited by 59
Self-citationSingh, S. P., Pant, K. K., & Krishania, M. (2023) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2023.106160 · Cited by 59
Ethanol-Enhanced Liquefaction of Lignin with Formic Acid as an in Situ Hydrogen Donor
Ouyang, X., Huang, X., Zhu, Y. C., & Qiu, X. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b01127 · Cited by 55
Hardi, F., Mäkelä, M., & Yoshikawa, K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.033 · Cited by 50
Montesantos, N., Pedersen, T. H., Nielsen, R. P., Rosendahl, L. A., & Maschietti, M. (2019) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2019.04.001 · Cited by 42
Maqbool, W., Hobson, P. A., Dunn, K. G., & Doherty, W. O. S. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04111 · Cited by 38
Montesantos, N., & Maschietti, M. (2020) · Energies · doi:10.3390/en13071600 · Cited by 38
Hydrotreating of Hydrofaction™ biocrude in the presence of presulfided commercial catalysts
Haghighat, P., Montanez, A., Aguilera, G. R., Guerrero, J. K. R., Karatzos, S. K., Clarke, M. A., & McCaffrey, W. C. (2018) · Sustainable Energy & Fuels · doi:10.1039/c8se00439k · Cited by 37
Sandquist, J., Tschentscher, R., & del Alamo Serrano, G. (2019) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-9507-2 · Cited by 29
Ghosh, S., Das, S., & Chowdhury, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.04.094 · Cited by 26
From Pulp to Aromatic Products─Reaction Pathways of Lignin Depolymerization
Wörner, M., Barsuhn, A., Zevaco, T. A., Hornung, U., & Dahmen, N. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c04509 · Cited by 27
Contribution of Fourier transform mass spectrometry to bio-oil study
Hertzog, J., Carré, V., & Aubriet, F. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814013-0.00022-3 · Cited by 30
Boosting the Higher Heating Value of Eucalyptus globulus via Thermochemical Liquefaction
Fernandes, F., Matos, S., Gaspar, D. B. O., Silva, L., Paulo, I., Vieira, S. I. C., Pinto, P., Bordado, J. M., & dos Santos, R. G. (2021) · Sustainability · doi:10.3390/su13073717 · Cited by 20
“5 wt % in wood and 25 wt % in agricultural wastes) [5].”
BackgroundPatle, K. L., Pardhi, P., Pantawane, S. R., Sarve, D. T., Ekhe, J. D., & Wasewar, K. L. (2025) · Catalysis Reviews · doi:10.1080/01614940.2025.2453713 · Cited by 17
Hydrothermal processing of pine wood: effect of process variables on bio-oil quality and yield
Wądrzyk, M., Berdel, M., Janus, R., & Brilman, D. W. F. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201910802004 · Cited by 21
Weber, R. S., & Holladay, J. E. (2018) · Engineering · doi:10.1016/j.eng.2018.05.012 · Cited by 16
Feng, J., Hse, C., Zhong-zhi, Y., Wang, K., Jiang, J., & Xu, J. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.182 · Cited by 16
Lu, W., Ma, M., Zhang, X., Zhang, B., Guo, Y., & Wang, C. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.12.007 · Cited by 14
Thermo-catalytic process for conversion of lignocellulosic biomass to fuels and chemicals: a review
Mandal, S., Bandyopadhyay, R., & Das, A. K. (2018) · International Journal of Petrochemical Science & Engineering · doi:10.15406/ipcse.2018.03.00077 · Cited by 12
Non-catalytic Hydrothermal Liquefaction of Biomass: An Experimental Design Approach
Hardi, F., Mäkelä, M., & Yoshikawa, K. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.282 · Cited by 7
Study on Improvement of Preparation Efficiency of Lignin Rich Micro-Cellulosic Fines
Lee, J. M., Ahn, E.-B., Choi, H.-S., Ryu, J.-A., & Eom, T.-J. (2018) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/jktappi.2018.10.50.5.114 · Cited by 6
REVE: Versatile Continuous Pre/Post-Torrefaction Unit for Pellets Production
Doassans-Carrère, N., Muller, S., & Mitzkat, M. (2014) · Springer eBooks · doi:10.1007/978-3-658-04355-1_20 · Cited by 5
Self-citationEvaluation of biofuel from the torrefaction of Malaysian food waste
Rahman, R. N. U. A., Rasid, R. A., Yong, Y. S., & Ismail, M. I. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.06.318 · Cited by 4
Pimenta, A. S., Trianoski, R., Pizzi, A., Santiago-Medina, F. J., de Souza, E. C., Monteiro, T. V. D. C., Fasciotti, M., & Castro, R. V. O. (2019) · Wood Science and Technology · doi:10.1007/s00226-019-01126-8 · Cited by 3
López, S., Lara, F. X., Medina, F., Constantí, M., & Montané, D. (2025) · Fuel · doi:10.1016/j.fuel.2025.137354 · Cited by 2
Role of catalysts in sustainable production of biojet fuel from renewable feedstocks
Yousuf, A., Rahman, M. A., Rahman, M. J., & Hossain, M. S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85715-4.00006-9 · Cited by 3
Catalytic conversion of biomass-derived synthesis gas to liquid fuels
París, R. S. (2016)
Supercritical Carbon Dioxide Extraction and Fractionation of Bio-oil
Maqbool, W. (2019) · Queensland University of Technology · doi:10.5204/thesis.eprints.134415
Byproducts, Waste Biomass and Products to form Green Diesel and Biocrude Oils
Sharma, B. K., & Kohli, K. (2020) · MDPI eBooks · doi:10.3390/books978-3-03943-518-0
Gundupalli, M. P., Thomas, A. S. S., Gundupalli, S. P., Bhattacharyya, D., & Sriariyanun, M. (2022) · Clean Energy Production Technologies · doi:10.1007/978-981-16-4505-1_13 · Cited by 2
Microwave-Assisted Production of Sustainable Fuels
Fattah, I. M. R., Huang, Y., Wei, W., Silitonga, A. S., & Kalam, M. A. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-15742-4.00118-6
Metadata
- Authors
- Doassans-Carrère, N., Ferrasse, J.-H., Boutin, O., Mauviel, G., & Lédé, J.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Ferrasse, Jean-Henry
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-08-01
- Volume
- 28
- Issue
- 8
- Pages
- 5103-5111
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2066906008
- Cited by
- 49
- References
- 45
- Citations by year
- 2025: 3 · 2024: 1 · 2023: 4 · 2022: 4 · 2021: 2 · 2020: 4 · 2019: 6 · 2018: 9 · 2017: 5 · 2016: 7 · 2015: 1 · 2014: 3
- FWCI
- 2.77
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- HAL (submittedVersion)
- Funders
- Fondation Tuck
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Keywords
- biomass fast pyrolysis, direct liquefaction, bio-oil, beech sawdust, oil yield, reaction temperature, cyclone reactor, levoglucosan, levulinic acid, gas composition, moisture content, 1H NMR, elemental analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.